title 'Wtc7 Demolition -' contains 441 files, 2810 entries, 358 unique posts

onesliceshort
post Nov 29 2012, 08:22 PM
Post #1



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
elreb
post Dec 26 2012, 07:11 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



“What little damage that the Verizon building received”…came from the demolition of 7WTC.

The picture indicates one phase of destruction was from floors 5 to 7.

I would “Guess” that demolition came from 3 levels with one final kicker at the end.

You know…the “Pull. The building had been weakened by 30% early in the morning.

Now that I have the prints, I can put together a good “guess” of progression of events.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 03:16 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



After seeing these photos (again) it reinforces my belief that there was a runaway failure in the transfer trusses and other load transfer girders. But I see that there was an extensive braced frame 3D lattice which also seems to appear to span over Con Ed. That too is suspicious.

Finally seeing the numerous splices which were used to field-erect these heavy panels into trusses I find many opportunities and vulnerabilities. I don't know whether or not these details were available to the ASCE back in the period just after the event, but it seems to me that this clearly should have received lots of scrutiny. Apparently all the steel from 7 is gone. If true, that would leave the analysis to theoretical modelling.

Why hasn't AE911T seen this?
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 05:47 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Kawika is one of the best examples of a “Team player”.

He always adds positive information.
Go to the top of the page
 
+Quote Post
elreb
post Dec 3 2012, 11:29 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



EMERGENCY OPERATIONS CENTER:

During major emergencies and special events, OEM activates the City's Emergency Operations Center (EOC). With space for more than 130 representatives from local, state, and federal agencies and private and non-profit entities, the EOC functions as a central clearinghouse for information coordination, resource requests, and decision making.

The Emergency Command Center was on the 23rd floor 7WTC.

At 9:03 am, the doors to the command post were locked…no one could get in.

At approximately 9:44 a.m., after the report of a “third” aircraft heading into the city and news that the Pentagon had been attacked, a Deputy OEM Commissioner ordered the complete evacuation of 7WTC.

For some odd reason, the fire suppression system had been deactivated…in spite of the fact that NYFD was using its standpipes.

It seems rather “Irresponsible” to draw conclusions without first reviewing the “Facts”.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 03:35 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Thanks! To both.

thumbsup.gif

QUOTE
What is 79 doing?


The fall guy. Literally.

This post has been edited by onesliceshort: Dec 30 2012, 03:36 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 04:33 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



79 got blamed but he was a diversion.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 11:15 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The drawing in your last post is NOT a truss... it is as diagonal braced frame. I am not sure you understand how a truss works... maybe you do, But not from your depiction in posting #47.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 28 2012, 11:12 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika)
Take a look at the column. Both the inner and outer webs were vaporized. It appears that there was enough left over after the collapse to continue the erosion on this column while it was horizontal.


Exactly bro.

Is there a timeframe for when the WTC7 steel was removed? I've read the date 29th September but had also read somewhere that it had been removed within days (not sure where I read that).

Just need to keep chipping at and narrowing down the arguments lads.
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 04:43 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where is the weight on this blueprint?

Not over 79 or 80…

Does anyone know what was under the East penthouse?

The original roof prints show roof drains.

My drawings show satellite dishes and communication.

OSS

The bunker was also a good place for mischief. Good reason to have a lock down.

Kawika

Many Thanks to the “Team”!

I have an unfair advantage to a lot of unpublished data.


Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 09:09 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Does anyone know what was under the East penthouse?


I think that this area should be dug into.

Weren't there three double height trading floors on the upper levels?

Edit: thanks guys for the extra plans - much appreciated. If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

This post has been edited by onesliceshort: Jan 2 2013, 09:10 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 06:23 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



You wouldn't have to weaken the trusses if you took out the columns which support them... no?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 01:48 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Virtually every high rise building in NYC has mech equipment on the top most floors and all have water tanks on the roof... often concealed behind structures or screens of some sort. Having worked on the 74th Floor of the Empire State Building with my office windows overlooking lower Manhattan I could see almost all the roof tops and can attest to this. Of course this makes perfect sense. Now there are all manner of communications antennas added to HVAC and building services up there.
Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 11:26 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE
The “trusses” were designed to transfer the load from columns offset above into two columns below.
The actions we see in the videos require a whole bunch more than they had control over. Like every exterior column being ~simultaneously severed over eight floors.
Otherwise the building would have toppled over.

I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 01:28 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Check this out.

5th floor stair #1 next to Truss #3 and stair #2 next to Truss #1 and #2.

Think about that and the Hess/Jennings explosion.

[I know...my spelling is off]



Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 01:43 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Meat on the Bone…First time ever shown…better save a copy...

Actual construction prints…





Go to the top of the page
 
+Quote Post
SanderO
post Dec 29 2012, 09:23 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Elreb,

Not a bad verbal description of the strategy for axial load transfer. The 8 tranfer girders were bearing on the north side of core... with the cantilever ends supporting 8 columns 41 stories tall each... at the inside face of the north face. If the transfer girders (cantilevers) and transfer trusses failed as they were interconnected and supported multiple columns above and if they failed could cause a lot of the tower from above flr 7 to have no load paths to the foundations... and these structures topped out at 100' above the ground... the same distance of the free fall decent seen when the building came done. This also happens to correspond to the region of inward bowing of the north facade.

There is strong evidence for their having failed prior to the obvious tower movements. I suspect that not only did this transfer structures collapse (from whatever cause)... but the 8 story trusses on the north of both the east and west walls may have been pull in or forced out when the more central structures failed. This would essentially leave the tower from floor 8 up with nothing to support it and 100 foot descent would meet no significant resistance.

The problem is, however, that there are very precise traces of the downward motion and not only did it average at FF for 100 feet, but there was a period of MORE than free fall. So there was something else in play of this is true? Could this be a spring action of some sort? If these velocity time/motion studies are accurate the 100 foot decent is not a simple gravity driven drop.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:06 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



I give up.

As for the FEMA diagram, if the square section in the cartoon is meant to depict the entire ConEd area, then yes, something's wrong there. The eastern face of the ConEd concrete structure appears to run along beside column 79 and the shipping ramp

http://img593.imageshack.us/img593/2897/200719853.jpg

http://img196.imageshack.us/img196/9862/200719852.jpg

Edit: but the trusses and columns match with elreb's plans

http://www.rebrammer.com/images/colm80crop.gif



This post has been edited by onesliceshort: Jan 1 2013, 12:14 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 11:11 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Interesting comment Kawika

The floors likely were not falling. I think your comment on the window distortion moving down suggests that the facade bulging was an event originating at the top. This may suggest that the entire frame above the transfer structures was intact with only a few column line hanging held by beams for some period and then the collapse occurred. Perhaps the mass of the east penthouse was large enough and it blasted air outward as it dropped.... displacing enough air in its path to bulge the windows???

These buildings has closed windows and it's conceivable that a large collapse of flooring somewhere would displace air. I don't know that it would be enough to created the buldge in the windows. I don't think this pulse of air would effect the frame itself. The curtain wall was not an especially robust attachment to the spandrels and was bolted to clip angles. Also I would think that the curtain wall was somewhat flexible... especially the glass which is bedded in silicone.

I am guessing the direction of movement of the bulge suggests a downward moving object creating the over pressure.
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 10:51 PM
Post #2





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The East Penthouse fell in, but the sunlight that shown through the windows was only one level, not the entire height. No exterior north columns were affected during this event.

If the three trusses were failed they would have compromised maybe 10 columns. Some of those would have been a few north face columns affected by the loss of the E&W end transfer girders.

We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.

This post has been edited by kawika: Jan 1 2013, 10:52 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 02:25 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Thanks Elreb....

I will study these.. Are there drawings for the braced frame which appears to be over the sub station in the photos

I think this area is of interest.,

Mr K obviously was confused. He tried.. and made a mistake or two... we all do.
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 06:07 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 12:08 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



What you showed is not a truss.. it's a diagonally braced frame. Ask an engineer. Do you have a section or shop drawing for this truss?

Diagonals do not a truss make.

Many buildings have diagonals and use triangulation to make them stiffer for wind shear. These are not trusses.

Learn about trusses:

https://en.wikipedia.org/wiki/Truss

diagonal braced frames:

http://www.steelconstruction.info/Braced_frames
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 01:42 PM
Post #2





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Nice find. Worth exploring further.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:13 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 09:34 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The transfer trusses and girders were connecting all the column lines you mention. If one of the elements under the penthouse... including T truss 1 (if we are to believe the plans) ... fails... the failure propagates to adjacent structures... especially transfer structures.

The East West Truss 1 was bearing on a north south transfer girder (see the lower right built up girder in the elevation of Truss 1... it in turn was supported on 2 columns (apparently)

Note in the confusing FEMA cartoon that T1 and t2 were both below the penthouse. The drop of the penthouse indicated that those two trusses failed... or the columns supporting at their west or east side. T1's east side was supported by another transfer girder bearing on 2 columns.

The take away (for me) is that once some part of this (Rube Goldberg) system of load transfer structures failed it would propagate through the structure. The plunge of the east penthouse is the tell tale sign that those structures failed.. BEFORE the rest of the tower drops.

The kink IS on/through the column line just next to Con Ed on the east which is also the line where T1 and t2 are supported on their west side.

The observed movements were:

swaying east-west for about 6 seconds
east penthouse collapses
west penthouse collapses
entire tower drops

I would add in some guesses:

single axial load path failure (transfer girder at east end of T1??)... (cause indeterminate)
swaying east-west for about 6 seconds
T1 and T2 buckle or fail (cause indeterminate)
east penthouse collapses
columns on north side of con ed fail.. south side... these support the 8 cantilever girders and the columns inside the north facade
T 3 buckles or fails (cause indeterminate) (at west side of 8 cantilever girders )
west penthouse collapses
parts of the space frames on the north side of the east and west wall fail/buckle fold onto the footprint
The entire tower no longer has any axial load paths from floor 8 to the foundations.
drops for 104' with sections of the floor still attached to the perimeter columns
entire tower drops
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 12:35 AM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Patsy UA 93 was to leave around 08:01 but was delayed until 08:42.

Newark International Airport is about 9 miles from WTC.

Patsy AA 11 took off around 07:59 made it to WTC by 08:46.

Logan is 190 miles from WTC

This is what caused things to go wrong.

I’m still guessing that 7WTC was the original [first] target.

The timing was just a little off…
Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 10:57 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617




Happy New year
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 10:52 AM
Post #2





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The exterior distortion races from top to bottom. This tells me it is a pressure pulse in the exterior columns, not the penthouse dropping physically through all those floors.

If it went more than one floor you would see a lot of daylight through the north windows, but you don't. You see one floor of daylight.

If the floors failed from bottom up as we were told, the distortion would race up, not down. The floor edges had a double row of shear studs on the wind girders that were right behind the granite spandrels. Don't you think the granite would have been flying off under the stress of floors hinging downwards?

Here's a screenshot of the plan showing 38 shear studs on the north wind girders. Note that these are grouped much closer than the floor beams. 38 studs over ~23 feet as opposed to 24 studs over 44+ feet.

http://img221.imageshack.us/i/windgirdershearstuds.jpg

If the floors were failing inside, you would have seen evidence of this outside.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:46 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 09:00 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Some 3 dimensional (partial) images of trusses 1 and 2





Any use?
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 08:33 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



No I don't think so... those are the standard/regular beams framed into a girder... probably near one of the corners.
Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 01:20 AM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Attention…all readers

Do to the simple fact that “SanderO” refuses to stay on topic and has a mission to waste P4T space with useless and worthless text…

I will no longer respond to any of his wandering false, inaccurate, incorrect, inexact, and invalid, off beat, unsound, untruthful, unproven and wrong blathering.

I recommend that all serious researchers to ignore him.

I am very close to solving the destruction of 7WTC and do not need distractions.
Go to the top of the page
 
+Quote Post
Ricochet
post Dec 25 2012, 08:15 AM
Post #2





Group: Active Forum Pilot
Posts: 746
Joined: 25-April 08
From: Canada
Member No.: 3,225



If WTC 7 fell straight down how could it damage the top of the Fiterman building across the street?
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 04:17 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



It would seem that columns and beams did not need to be cut…only weakened.

Properly, placed “exotic chemicals” would simply reduce the steel’s ability to hold its intended load.

Paper thin steel…my…my…all you need is gravity.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:22 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

I don't consider anyone an idiot. I have found most of those interested in 9/11 to be intellectually curious and intelligent. I have also found that many are not very good observers (not trained or experienced) and most have little to no technical knowledge of physics, statics, engineering and so forth. When most people confront complexity in their lives they need to have cartoon like understanding and have a working user interface. I consider myself only slightly advantaged with respect to the WTC destruction as I have been an architect since I graduated from college. I am not an engineer, though I was taught basic engineering, and use it in my work... I am not a physicist, though I did take classes in this and chemistry half a century ago. I have acquired other skills related to my vocations and non professional interests. All of these inform how I understand the world. I am certainly not an expert... and never claimed to be.

Enough said on that.

These photos are interesting. I believe I've seen them. But I am a bit confused as well (something normal with me). In the ,lower image it appears that the Con Ed facility reaches right up to Vesey Street and is further south than the braced frame compared with the FEMA cartoon. Also it the number of columns adjacent to Con Ed on the east is different in the cartoon and the image. And the top image Con Ed appears to be at least one column bay to the north (sort of where I thought it was). And then I don't see the trusses 1&2 either.

In the top image I do see what appears to be a 3 dimensional space frames over the sub station which are labeled 3,4 & 5 (flrs levels). But the sub station appears (mostly hidden) and well to the north of Vesey St. Whatever that 3 D structure is called it doesn't seem to be depicted on any of the FEMA cartoons... and what is labeled at truss 2 appears to be at the East wall.

I cannot dispute that these are photos taken during construction. But I can't make sense of them and relate them to the FEMA cartoons. And frankly I can't even figure out the levels or the column #s. Could this possibly be a reversed of composite or fiddled with image?

Am I the only person confused by this? I see some resemblance to parts of the FEMA cartoon, but more that looks nothing like it.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:03 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



As expected, you are missing the point…

And again…we are only talking about building 7 and its 3 trusses.

Please look at the title of the thread!

Why is it hard to stay on topic?

All three trusses have triangles.

Here is truss 3…see any 90's?

Note: The Vierendeel truss is a structure where the members are not triangulated but form rectangular openings… As such, it does not fit the strict definition of a truss; regular trusses comprise members that are commonly assumed to have pinned joints, with the implication that no moments exist at the jointed ends.

Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 08:24 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I like FEMA words.

The 5th, 6th and 7th floors contained the diaphragm floors, belt trusses and transfer girders.

Truss 1, Truss 2, Truss 3 and several cantilever transfer girders.

First off, I would want to soften column #80.

I think this may be your “Kink” area.

I also have a new word = cannibalize.

The steel is actually being eaten or dissolved alive and “not” by fire.

The cantilever transfer girders, spanned between the core and the north elevation at the 7th floor.

There were eight transfer girders to redirect the load of the building above the 7th floor into the columns that went through the Con Ed substation.

These girders cantilevered 6 feet 9 inches between the substation and the north facade of the building above.

The girders extended an additional 46 feet to the core.

The two transfer girders at the east end of the building were connected to Truss 1, creating a double transfer.

The girders varied in depth from 9 feet at the north end, to a tapered portion in the middle, and to 4 feet 6 inches at the southern section closest to the core. [We have the picture]

Each transfer girder weighed approximately 52 tons.

At the north wall, between the 7th and 5th floors, transferred columns were also part of the belt truss that circled the building as part of the lateral-load-resisting system and acted as a transfer for the columns above the shipping ramp.

The bottom cords of the transfer trusses were part of the support of the 5th floor slab and, as such, were located below the slab and above the ceiling of the 4th floor in a position exposed to fire from below.

The bottom cord members were massive members weighing slightly over 1,000 pounds per foot.

Such members are slow to heat up in a fire.


It was reported that these bottom cords were fireproofed.
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 01:40 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Keep this page handy so we can talk about it.

Floors 5, 6, and 7 are great places to “Trick-Out”.

http://www.wtc7.net/articles/FEMA/WTC_ch5.htm

Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 01:45 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I think the bunker improvements tie together with mischief.

New Pearl Harbor comes out in June of 1997.

The date of the Mayor’s Office of “Emergency Management” was perfect timing.

They range from 1998 to 1999 and gave them open run to the 7th floor and the floors below it.

Core drilling and fireproofing including 3M.

This would have been a great time and no one would think twice.

Bush 41 cheats the election in 2000 and in office by January 2001.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 09:30 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Some information about welds:

http://www.weldingtipsandtricks.com/full-p...ation-weld.html

And welding failures:

http://www.welding-advisers.com/Welding-failures.html
Go to the top of the page
 
+Quote Post
elreb
post Nov 29 2012, 11:36 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



We can borrow from our other threads and put this puzzle together.

Forget theory…go to “Guess”…then compare the consequences to experience.

Results? Why, man, I have gotten lots of results!

If I find 10,000 ways something won't work, I haven't failed.

I am not discouraged, because every wrong attempt discarded is often a step forward....

The three things that are most essential to achievement are common sense, hard work and stick-to-it-ness...
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 02:33 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where are the bathrooms?

By the way...the fire cabinet and riser were mounted on column #79.



Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 12:27 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Interesting comment Kawika


Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?

Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 09:17 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



I'd have to read through this a few times but that's what I call meat on the bone!

For the greenhorns among us, are there any visual interpretations of the layouts described?

Could the 7,500 tons of cooling towers on the 45th floor be the reason that Column 80 was targeted?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 12:30 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The architectural plan calls out a truss which runs between column 78 and 76. Column 79 and 80 in the photo appear to be adjacent to Con Ed.

The FEMA diagram appears to be mis-labeled and the photos are as well. It's hard to make any sense from these 4 depictions which are intended to be of the same structure.

Who added to column numbers on the photos?

What's the deal with the space frame over Con Ed? Why does FEMA leave this out? It seems to be this was also a long span structure very much like a truss bridge over Con Ed.

The girder labeled truss 2 is spanning over Con Ed not east of it... in the lower photo. Perhaps the structure was not suspended from that girder labeled truss 2 which would be the bottom chord of a truss.. yet to be constructed.

I wouldn't give up... but this is getting curiouser and curiouser.

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 10:26 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.


No, it was a response to my query about the renovations.

My point was that there was atrium like spacing similar to the lower floors that could be used to create the same conditions as CD - kick the legs out from underneath. Pure greenhorn conjecture but worth discussing.

I asked because the east penthouse collapse didn't occur due to Column 79. Nor any activity whether manmade or "heat" induced 35-40 floors below.

The columns running through the east penthouse had to be taken out judging by the video evidence, but at a higher level, no?
Go to the top of the page
 
+Quote Post
elreb
post Dec 27 2012, 07:10 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



First picture shows sulfur activity on the towers.

Second picture shows sulfur activity from 7WTC



Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:41 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

You may be not understand how any building would and do collapse or fall and especially the examples of CDs. In them only a very few columns are destroyed. Once this happens there is no longer adequate load paths to support the structure...it then COLLAPSES and all the other columns are buckled.. or break apart at their connections.

Look at 7's destruction like this... it begins with one or two failures... which propagate to fail other parts of the structure... this is *using up* the reserve strength.. whatever it is.. As this process continues...(usually at an increasing failure rate) it reaches the point where the reserve strength has all been used up (destroyed columns / axial load paths).. and then rapid failure occurs of all remaining structures. This could mean... for example.. all the core structures are destroyed and only the perimeter columns are left to support the entire mass... if one more failure occurs all the other remaining columns are seeing loads in excess of their ultimate yield strength and fail in a new york moment... rapid onset of collapse. That is precisely how a *global* failure occurs.

As we don't see any evidence of perimeter column failures with the exception perhaps of the SW corner gash.. and that did not propagate visibly... corner are sort of the end of the line... the failures apparently were inside the structure NOT at the perimeter columns.

Also consider that the perimeter columns were all connected into a huge moment frame... with massive spandrel beams. These beams supported the facade side of the floors as well as providing bracing for the columns. The moment frame at the perimeter can be see as a massive vierendeel truss and would act almost as a single element.

The facade coming down as what appears to be a complete 4 sided unit indicates that the perimeter frames were largely intact, but what supported them was removed for at least 8 floors... and the most likely 8 floors were the ones from ground to floor 8.
Go to the top of the page
 
+Quote Post
elreb
post Nov 30 2012, 12:26 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



My first guess would be “Hidden in Plain Sight”.

I must also agree with preplanning.

No one runs from a bunker that is not under attack.

Can you imagine telling General Patton to run from a German airplane?

We can only guess at what plan “A” was, yet it did not pan out.

Every building in the WTC complex was planned to be destroyed, while at the same time leaving the old historical buildings alone.

When it got down to brass tacks, plan “B” was to simply drop the structure and invent obscure answers.

NOTE: I’ll get back to the Ammonium perchlorate powder after I look at it.
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:45 AM
Post #2





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



A bit off topic, but the irony is just too much for me. This is like letting the foxes guard the chicken coop. Other members of this task force were also at the WTC on 9/11.


QUOTE
REPORT OF THE NEW YORK CITY NEW YORK STATE TASK FORCE ON BUILDING AND FIRE SAFETY

Task Force Members

Jerome M. Hauer, Commissioner, Co-Chair
New York State Division of Homeland Security and Emergency Services

NYC/NYS Task Force Report


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:46 AM
Go to the top of the page
 
+Quote Post
elreb
post Nov 30 2012, 04:27 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Ok, let’s see if I can come up with a condensed version of Christopher Bollyn.

100% of 911 events were preplanned for the expressed reason to keep the US in perpetual War and exposer to valuable land resources. Defense contractor are in hog heaven.

Military forces would be centrally located to assist both Israel and Saudi Arabia.

[Follow the money]

Saudi Arabia agrees to provide financial assistance and a dozen or so diversionary patsy’s.

Mossad agents agree to provide the real activity and classified exotic chemicals.

Next you have Mossad + CIA Cooperation = US Federal support.

Al-Mōsād and Al-Qaeda = 911; "The Institute" and “the Data Base”

For several know reasons, the entire WTC has to be destroyed, yet leaving all other historic buildings intact. This plan was worked out by the WTC players who had loyalty connections to Israel.

A more detailed examination of the insurance companies will expose their hold cards.

Some folks may not like it, however I feel a third plane was intended for 7WTC but failed to arrive.

It is my “Guess” that 7WTC was the center of operations

Several floor had under gone major remodeling including the 5th. No one would think anything unusual was going on. As stated, fireproofing mixes well with exotic chemicals.

Wasn’t the bunker completed in 1998? [Great timing]

A “New Pearl Harbor” June 1997 "Statement of Principles" and proceeds "from the belief that America should seek to preserve and extend its position of global leadership by maintaining the preeminence of U.S. military forces.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 31 2012, 06:28 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Oh man...my bad doh1.gif

So would the splices shown be a logical area to attack?

Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 11:45 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



In an long span open office structure the core carries less than half the floor loads. But if the design is a square, rectangle or trapazoid the four corners of the core will carry much larger floor loads than any of the columns in the plan. You can see this by noting the size of the sections for these 4 columns. In the twins core it was 501, 509, 1001 and 1009. We had data for the twins columns and those four were each 2x as string (cross section area) as the next strongest column and as much as 10x as much as inner core columns and almost 15x as strong as one central core column.

The column (79) which NIST focused on was one of those columns which carried a large area of floor loads. But this NE corner also was supported down low on the transfer structures. Obviously the engineers / designers chose to support the heaviest equipment where the strongest columns were located as well as considering the proximity to riser shafts and so forth. Did the additional mass of a storage tank drive this column down? Of course it contributed to the axial load... but the columns were sized up to carry this load.

The weakest columns are in the core area and support the smallest floor loads...because the core is filled with shafts for elevators and mechanicals. However when a stronger column fails (for whatever reason) its loads are then redistributed to first adjacent columns and they may be much weaker to begin with and pushed close to or over their capacity. And this is how load capacity is destroyed progressively and can cascade rapidly through the structure leading to a *global* failure of all columns and then rapid onset of collapse.

A telltale sign of load redistribution can be detected if the building twists, torques, tilts even a few inches. This WAS measured prior to any naked eye motion... in 7 and in WTC 1. If this is in fact what happened then this rules out an instantaneous destruction of all load paths (80 or 81 columns over 8 floors INSTANTANEOUSLY). That would produce a straight drop... with no distortion of the top.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 28 2012, 09:09 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.


Are there any details on the OEM diesel generator upgrades? Extra fireproofing? Are there strategic points in the steel framing/core within the area of the diesel fuel tanks where this "fireproofing" may have been applied?

Could fireproofing with this exotic accelerant be applied at strategic points? Only to combust at a certain temperature? Or chemically ignited through the sprinkler system?

Did it need a kick-start because they f-ed up Plan A?

Those images are unreal.

This post has been edited by onesliceshort: Dec 28 2012, 09:10 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 02:52 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 01:31 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Oops, I ask the wrong question.

I meant to ask “What was in the East Penthouse?”

Apparently, mechanical stuff like air handlers.



Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:56 PM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



"Mr Koenig" at FEMR's site labelled them. I can't vouch for them but the guy seems to know his stuff.

Mr Koenig's collection of structural photos only reach Floor 5 (slab). There must be photos out there of Floors 5 to 8 being withheld. I mean, if those photos were taken out of structural engineering interest, why would the photographer stop at the most interesting section of the build?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 12:07 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



There is good visual evidence that the east penthouse dropped through the entire height of the tower. Achimspok and or femr2 analyzed the reflection / distortion of the glass which appears to be a pressure pulse of some sort caused by the motion of the penthouse dropping. This could have been a small pull in of the floors as it dropped down.

There are enhanced videos which show this and it is quite convincing that the event traveled down through the tower. You can find these vids at the 911FF or at one of the aforementioned sites.

We certainly do need to have as much detailed information about the structure (plans, sections, details, specs, test logs,shop drawings, photos during construction) as well as data derived from the movements of the tower. Getting this has been like pulling teeth. It all should have been available to the public at one site.

I suspect that without actual images of the area in question just prior to collapse or the steel from the area post collapse for examination and testing... it will be impossible to reach a conclusion as much as a well thought through speculation. If all of the framing and loading data were available FEA could be run to simulate the collapse modes. But this, I suspect would take enormous computer power, and require many different *what if* inputs. However it should be possible to produce a model (gif simulation) which matches the actual observations unlike the NIST's simulation / offering.

Understanding will come from accurate observations, knowledge of the actual structure and technical knowledge of physics, engineering and materials science. Without this one can only have a cartoon conception of what happened.

I believe the initiation from whatever cause(s) was in the location on floor 5,6 & 7 east side where the transfer structures were located which I have been saying for a year.

Go to the top of the page
 
+Quote Post
elreb
post Dec 9 2012, 06:50 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



If you reread Shyam Sunder’s report slowly and completely then

Include the 3 steel analyst reports showing sulfur and Iron Oxide embedment then

Study the several dozen pictures of “Vaporized” steel then Add in eye-witness accounts

You get a “Man-made” disaster.

We even have 4 rolls of “A” drawings from Skidmore, Owings & Merrill dated 1986.

SOM received a gold LEED rating for its sustainable design components on 7WTC.

These guys also did the new 7 WTC, 1WTC and the Sears tower

"Even though Building 7 didn't get much attention in the media immediately, within the structural engineering community, it's considered to be much more important to understand," said William F. Baker, a partner in charge of structural engineering at the architectural firm Skidmore, Owings & Merrill.

"They say, `We know what happened at 1 and 2, but why did 7 come down?' "

Engineers and other experts have already uncovered evidence at the collapse site suggesting that some type of foul played a significant role in the building's demise, but they expect to spend months piecing together the picture of what remains a disturbing puzzle
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:50 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



So now magically Truss #3 is not a truss and the structural prints are a fraud!

Between column 61 and 62 it is called truss #3.

I have both “S” prints and “A” prints.

Why can not you stay on topic?

Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 08:03 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS.

Correct.. these are the so called beam stubs and for columns called beam stub outlookers and used to connect beams to columns and in this case truss panels or diagonal struts to. All of these connections use 3/4"Ø bolts and gusset plates.

I have long claimed that these were the vulnerable part...where they were bolted. One side is welded in the factory. Welds are rated for strength just as bolts are. The important consideration may be the ultimate strength of the welds.

If you consider the that the strength of the steel beam or panel of a truss member is directly proportional to is criss sectional area you can see that connections represent a very different animal.

Let's suppose that the beam is a very heavy member carrying very large loads and is say 2" thick steel. How do you weld a connection which has the full 2" thick of steel? These are call full penetration welds. With thin material this is not especially challenging.. but I'd bet that getting a full pen weird with 2" plate is.

In fact some of the very thick plates welded to make up box sections.. columns showed these welds opened after the destruction.. they failed and parted. Architect Robert McCoy who is now on the board at AE911T told me that when the towers steel box columns were being fabricated many of these were rejected on inspection for the reason I noted.

You will also find testimony from several engineers,and I believe professor Corbet that there was concern about the performance of the connections. It seems that little was done to pursue this aspect of building performance.

I think you have correctly identified an area of concern and something I have been writing about since 2010.

Elreb,

You don't have to advise the readers what is valid and invalid. Readers are intelligent enough to sort out relevant information from spam. As I have written, any number of times, I am wrong as others are, and when it is pointed out to me I correct my statements. I believe the information about structure I provided are on topic and useful in understanding this complex problem.

As per your usual *style* you attacked me not the information I provided about trusses and braced frames... neither of which I wrote, but simply referenced.

Happy New Year
Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 07:58 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 09:36 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



More data: Please note that the data comes from Elreb and the Team...

South looking north...

Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:44 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Are you suggesting that the East Penthouse mass drove down because the trusses and structure below failed? Obviously if the structure supporting a mass above is removed... gravity will drive the unsupported structures downward.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:16 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Don't worry about your spelling... we can read through typos.

This is a good find but not unexpected as the egress stairs were, I believe, on the east and west side of the cores were the trusses 1, 2 and 3 were located with 1&2 being on the east side.

Now we need to find out what was on "the other side" (core side) of those stairs... equipment and so forth.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 08:48 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika)
We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.


That's what has been stumping me for days looking through the floorplans that we have.



The penthouse would have to fall through six columns for 45 floors (or 38 if we agree that the lower floors were kicked out).

And then of course the global failure



As elreb has said, the trusses and the lower 7-8 floors was only part of the op.

Judging by the visuals alone, the east penthouse looks to have been used as the "kicker" to take out the already weakened trusses/lower floors, but what brought the whole building down like a stone, as kawika says, is a mystery to me. Unless there were "unusual events" on the upper floors as well.

2cents
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 10:51 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

We would have to see the plans of the alteration. My guess, without seeing them is that these were long span column free office floors with a few exceptions such as 79, 80 and 81. Two story spaces could be created for trading rooms without removing any columns or leaving them in place in the middle of the two story spaces.

If the east penthouse did collapse through the entire visible portion or the north facade we have to conclude that the axial supports were no longer there... as far down as we can see.

If the penthouse represented an exceptionally large load... more so than the same for each of the floors below its footprint... it could be the driver of the pressure pulse. Just a guess here. And the drop could be from failures of the structure in the region below it from floors 1-8.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 25 2012, 10:15 AM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



What does "fell straight down" mean? And who said it?

Wasn't something similar said about the twin towers? Their debris was scattered out to 400+ feet from each tower.

Language is not precise... and it's hard to know what people mean by what they say. And then when others repeat something they often add or alter the language and the meaning.

It's pretty clear that researchers working with limited resources are limited in what they can know with 100% certainty/accuracy.
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 11:01 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



June 3, 1997 “Statement of Principles”

American foreign and defense policy is adrift. Conservatives have criticized the incoherent policies of the Clinton Administration. They have also resisted isolationist impulses from within their own ranks. But conservatives have not confidently advanced a strategic vision of America's role in the world. They have not set forth guiding principles for American foreign policy. They have allowed differences over tactics to obscure potential agreement on strategic objectives. And they have not fought for a defense budget that would maintain American security and advance American interests in the new century.

We aim to change this. We aim to make the case and rally support for American global leadership.

As the 20th century draws to a close, the United States stands as the world's preeminent power. Having led the West to victory in the Cold War, America faces an opportunity and a challenge: Does the United States have the vision to build upon the achievements of past decades? Does the United States have the resolve to shape a new century favorable to American principles and interests?

We are in danger of squandering the opportunity and failing the challenge.

We are living off the capital -- both the military investments and the foreign policy achievements -- built up by past administrations. Cuts in foreign affairs and defense spending, inattention to the tools of statecraft, and inconstant leadership are making it increasingly difficult to sustain American influence around the world. And the promise of short-term commercial benefits threatens to override strategic considerations. As a consequence, we are jeopardizing the nation's ability to meet present threats and to deal with potentially greater challenges that lie ahead.

We seem to have forgotten the essential elements of the Reagan Administration's success: a military that is strong and ready to meet both present and future challenges; a foreign policy that boldly and purposefully promotes American principles abroad; and national leadership that accepts the United States' global responsibilities.

Of course, the United States must be prudent in how it exercises its power. But we cannot safely avoid the responsibilities of global leadership or the costs that are associated with its exercise. America has a vital role in maintaining peace and security in Europe, Asia, and the Middle East. If we shirk our responsibilities, we invite challenges to our fundamental interests. The history of the 20th century should have taught us that it is important to shape circumstances before crises emerge, and to meet threats before they become dire. The history of this century should have taught us to embrace the cause of American leadership.

Our aim is to remind Americans of these lessons and to draw their consequences for today. Here are four consequences:

• We need to increase defense spending significantly if we are to carry out our global Responsibilities today and modernize our armed forces for the future;

• We need to strengthen our ties to democratic allies and to challenge regimes hostile to our interests and values;

• We need to promote the cause of political and economic freedom abroad;

• We need to accept responsibility for America's unique role in preserving and extending an international order friendly to our security, our prosperity, and our principles.

Such a Reaganite policy of military strength and moral clarity may not be fashionable today. But it is necessary if the United States is to build on the successes of this past century and to ensure our security and our greatness in the next.


Note: To some degree, Building 7 may have been the original target…


"All the evidence that we stored at 7 World Trade, in all our cases, went down with the building," according to US Secret Service Special Agent David Curran -- the number three guy in that office.

"We lost our network, we lost all our computers, we lost all the equipment that we use as Secret Service Agents.”

“Everything from machine guns to our shotguns to our electronic equipment that we use."

“A lot of cases had to be closed as a result of losing that building.”
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 11:00 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



A section of an A36 wide flange beam retrieved from the collapsed World Trade Center Building 7 was examined to determine changes in the steel microstructure as a result of the terrorist attack on September 11, 2001.

This building was not one of the original buildings attacked but it indirectly suffered severe damage and eventually collapsed.

While the exact location of this beam could not be determined, the unexpected erosion of the steel found in this beam warranted a study of microstructural changes that occurred in this steel.

Examination of other sections in this beam is underway.

ANALYSIS

Rapid deterioration of the steel was a result of heating with oxidation in combination with intergranular melting due to the presence of sulfur.

The formation of the eutectic mixture of iron oxide and iron sulfide lowers the temperature at which liquid can form in this steel.

This strongly suggests that the temperatures in this region of the steel beam approached ~1,000ºC, forming the eutectic liquid by a process similar to making a “blacksmith’s weld” in a hand forge.
Go to the top of the page
 
+Quote Post
elreb
post Nov 29 2012, 08:38 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I am talking to Kawika as we speak.

He has new data...

Thanks for the new thread

Great title...
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 10:17 PM
Post #2





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Elreb,

Not all trusses have diagonals or triangulation... the triangle is used because it doesn't deform.

The twin towers used Vierendeel trusses which have no diagonals... they relie on very stiff 90° joints.

A truss is really a beam which has most of the web removed and gets its strength by having the tension member and the compressive member separated... the web is reduced to the diagonal (triangular) chords which links them together in a beam action... tension on bottom and compression on top.
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 30 2012, 11:58 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



My 2cents on how part of the demolition was carried out.

QUOTE
http://science.howstuffworks.com/engineeri...g-implosion.htm

The basic idea of explosive demolition is quite simple: If you remove the support structure of a building at a certain point, the section of the building above that point will fall down on the part of the building below that point. If this upper section is heavy enough, it will collide with the lower part with sufficient force to cause significant damage. The explosives are just the trigger for the demolition. It's gravity that brings the building down.


The lower floor atriums:



Note that there was also a 2 floor mechanical space between Floors 5 and 6 to the east of the building. And that Column 79 and 2 of the trusses ran under it.



IMO the lobby and atriums were used to kick the legs out from underneath the building. Exactly what Jowenko was describing.

Full Jowenko interview:

http://pf911t.org/forum/index.p...&p=10805945

No need to complicate matters when there were almost 6 floors vulnerable to provide the exact same effect as controlled demolition without the normal CD explosives.

Gift wrapped for those who first surveyed the building to see which sections of the structure they could manipulate.


Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 08:28 AM
Post #2



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Thanks DYEW.

QUOTE
''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need......entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.



What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents

This post has been edited by onesliceshort: Jan 3 2013, 08:29 AM
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 05:45 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Gee, no wonder Mayor Rudy Giuliani, Police Commissioner Benard Keirk and Fire Department Commissioner Thomas Von Essen received honors from the Queen of England.

Everyone gets a pat on the back, a promotion and some bonus buck$.

In January of 2002, Giuliani starts “Giuliani Partners” which included Kerik, Von Essen, Matthew Mahoney [Deputy Director of Advance for the Mayor’s Office], and Pasquale J. D'Amuro, [Assistant Director in Charge in the Federal Bureau of Investigation's New York office and an Inspector in Charge following the September 11, 2001 terrorist attacks].

Who are the real crooks here?
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 10:57 PM
Post #2





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



The entire WTC complex had to be destroyed...it is just that simple.

This was accomplished. Party time.

The following insurance companies were liable to Silverstein's compensation demand:

Swiss Reinsurance Co. [lead insurer] [Warren Buffett invested $2.6 billion]

Chubb Corp.,

Lloyd's of London,

Employers Insurance of Wausau

XL Capital Ltd.

St. Paul Travelers,

Industrial Risk Insurers [a former General Electric Co]

Allianz SE

Zurich American Insurance Co.

Royal Sun Alliance Insurance Group's Royal Indemnity Co

Note:

Warren Buffet was at Offutt Air Force Base on 911 entertaining quite a few VIP's from WTC.

You know…the same place where Bush 43 landed that day.

Oh, and Bush 41 was drinking champagne with the Saudi Arabians…

Here is an example of “Meat on the Bone”

The Oracle of Omaha is unlikely to have predicted this. Berkshire Hathaway, Warren Buffett's holding company, said that it would pour an extra $2.6 billion into Swiss Re to prop up the company's capital base after the reinsurer posted an $861.3 million loss .


Remember…Swiss RE was the lead company to pay for the 911 WTC.


For the record, Berkshire owns 13% of American Express. American Express is connected to Solomon Brother thru Citigroup.

5 largest reinsurance companies

1. Munich Reinsurance Company—$31,280 [Berkshire owns 10.5%]

2. Swiss Reinsurance Company Limited—24,756 [Berkshire investment]

3. Hannover Rueckversicherung AG—15,147

4. Berkshire Hathaway Inc. —14,374

5. Lloyd’s—12,977

Now…when US corporations need money, they get TARP funds. Therefore thru a maze of mind-blistering banking moves…in the end…the American tax payer gets the bill.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 03:24 PM
Post #3



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 07:52 PM) *
Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here


thumbsup.gif

https://rubessteaks.com/media/catalog/produ...boneSteak_1.jpg
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 11:50 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 2 2013, 03:09 PM) *
If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

Thanks
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 03:12 PM
Post #3





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE (SanderO @ Jan 3 2013, 08:46 AM) *
Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.

Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Yes, I have a problem with the Task Force, when you've got Hauer and other 9/11 alum, who were the most likely perps and should be on trial if not in jail by now.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 12:33 PM
Post #3





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 31 2012, 02:27 PM) *
Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?


I don't know what to call it. Maybe vibration from the penthouse hitting the 47th floor area. But I measured it--about one floor every 1/10th of a second. Too fast for gravity driven destruction.

I'm not taking credit for this. Somebody else called it a pulse. The sunlight thing was mentioned by others also.
Go to the top of the page
 
+Quote Post
kawika
post Dec 28 2012, 10:18 PM
Post #3





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 26 2012, 11:09 PM) *
Are there any details on the OEM diesel generator upgrades? Extra fireproofing? Are there strategic points in the steel framing/core within the area of the diesel fuel tanks where this "fireproofing" may have been applied?

Could fireproofing with this exotic accelerant be applied at strategic points? Only to combust at a certain temperature? Or chemically ignited through the sprinkler system?

Did it need a kick-start because they f-ed up Plan A?

Those images are unreal.


I believe there were innumerable locations where a high-tech incendiary could be placed.

Take a look at the column. Both the inner and outer webs were vaporized. It appears that there was enough left over after the collapse to continue the erosion on this column while it was horizontal.

We must find out what did this.
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 02:30 PM
Post #3





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 30 2012, 04:25 PM) *
Thanks Elreb....

I will study these.. are there drawings for the braced frame which appears to be over the sub station in the photos.

Mr K obviously was confused.


Mr. K was not confused.

The trusses bottom elements were at floor five. He shows the bottoms only.

There is way too much importance being placed on these friggin' trusses. They support a few upper columns. Fail all the trusses and you won't see the whole building drop like a stone.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 02:54 PM
Post #3





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 31 2012, 04:13 PM) *
One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...


Measure yourself on Achimspok's video analysis.

https://www.youtube.com/watch?v=JjQyXLRpULU

You can't see the entire face, so you have to guess about the lower end.
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 10:12 PM
Post #3



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Nov 30 2012, 01:38 AM) *
I am talking to Kawika as we speak.

He has new data...

Thanks for the new thread

Great title...


Good stuff thumbsup.gif
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 12:09 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (Ricochet @ Dec 25 2012, 02:15 AM) *
If WTC 7 fell straight down how could it damage the top of the Fiterman building across the street?

Fiterman Hall was a 15-story building at 30 West Broadway (also called 81 Barclay Street).

Actually, Bldg 7 was said to have fallen into its own footprint.

In reality it rotated and fell North West.

The West Broadway subway tunnel on the South East corner was heavily damaged.

Think about that…the building fell away from the subway.

Note in the picture that there was lots of water and meat on the Bone.

The picture also shows that the building did not fall on West Broadway.

Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 01:25 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 03:17 AM) *
I'd have to read through this a few times but that's what I call meat on the bone!

The way I see it, 80, 77, and 74 are doing the work on Truss #2.

73 and 76 doing the work on Truss #1

What is 79 doing?

I would weaken truss #2 first, truss #1 second and truss #3 third

Have your kink and eat it too.



Go to the top of the page
 
+Quote Post
kawika
post Dec 28 2012, 04:21 PM
Post #3





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (elreb @ Dec 25 2012, 09:10 PM) *
First picture shows sulfur activity on the towers.

Second picture shows sulfur activity from 7WTC





Oh my! Fire did that? Fire in a smothering pile?

If I make a fire and then cover it with concrete dust, will the steel trapped underneath look like swiss cheese when I take it out?
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 05:23 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 09:35 AM) *
The fall guy. Literally.

I still like the word = Patsy = who in effect, plays the scapegoat for a more elaborate crime.

I perceive a 2 phase destruction…weaken the trusses and kick the legs.

We have talked about Aluminum, Iron Oxide and Sulfur.

Another interesting metal is Magnesium.

When we were in the Boy Scouts, we would use it to start fires because it is flammable and burning at around 5,610 F.

It is also used in flares and fireworks.

Good stuff to get a chemical reaction going. Water actually causes it to burn better. [Ask the Germans]
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:28 PM
Post #3



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 2 2013, 12:58 AM) *
I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?


The almost freefall collapse of the East Penthouse is another clue (to what, I don't know yet)

http://www.youtube.com/watch?v=JjQyXLRpULU



It just fell through the building as if all support was removed throughout its downward path in one go.

Sorry if I'm jumping ahead here, but how could this be achieved? Columns 79 and 80 ran through the penthouse.





Edit: Don't Columns 76, 77 and 78 run along the "kink" area?

This post has been edited by onesliceshort: Jan 1 2013, 08:31 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:57 AM
Post #3





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 3 2013, 08:28 AM) *
What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents


All engineered designs have redundancy... or reserve strength. For structural systems alternate load paths is another strategy often employed.... so some number of structural elements can be removed without compromising the structure's ability to perform.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:32 AM
Post #3



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 04:26 AM) *
I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]


Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 07:03 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 09:35 AM) *
Thanks! To both.

OSS,

When I talk about weakening the trusses, I’m talking about the areas 5, 6, and below the 7 floor.

The construction pictures show connections and gussets several feet above floor 5.
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 10:01 PM
Post #3





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 28 2012, 03:09 PM) *
Are there any details on the OEM diesel generator upgrades? Extra fireproofing?

Yes, I had proposed a timeline on another thread, yet there were no takers.

The Team has tons of files and reports

I’ll try to get data up soon.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 08:31 PM
Post #4



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Dec 31 2012, 12:03 AM) *
OSS,

When I talk about weakening the trusses, I’m talking about the areas 5, 6, and below the 7 floor.

The construction pictures show connections and gussets several feet above floor 5.


Is that truss 2 seen in this image of Floor 5 (it's labelled "northeast looking northwest")?

Go to the top of the page
 
+Quote Post
elreb
post Nov 29 2012, 11:36 PM
Post #4





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



We can borrow from our other threads and put this puzzle together.

Forget theory…go to “Guess”…then compare the consequences to experience.

Results? Why, man, I have gotten lots of results!

If I find 10,000 ways something won't work, I haven't failed.

I am not discouraged, because every wrong attempt discarded is often a step forward....

The three things that are most essential to achievement are common sense, hard work and stick-to-it-ness...
Go to the top of the page
 
+Quote Post
kawika
post Dec 25 2012, 05:32 PM
Post #4





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (elreb @ Dec 23 2012, 02:09 PM) *
Fiterman Hall was a 15-story building at 30 West Broadway (also called 81 Barclay Street).

Actually, Bldg 7 was said to have fallen into its own footprint.

In reality it rotated and fell North West.

The West Broadway subway tunnel on the South East corner was heavily damaged.

Think about that…the building fell away from the subway.

Note in the picture that there was lots of water and meat on the Bone.


To be absolutely clear, just the east face of WTC7 rotated and fell NW. If you look closely in the videos you can see it falling last. It separated from the north and south walls and clipped the Fiterman Bldg.

The west wall ended up on top of the pile, due east, no rotation.
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:00 AM
Post #4





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE
Does anyone know what was under the East penthouse?


From what I remember that was one of the places they took floors out of, to put in a trading floor with tall ceilings.

QUOTE
Much of the new electrical, air-conditioning and mechanical equipment will serve three double-height trading floors. To create the extra height, workers are removing most of three existing floors, using jackhammers to demolish concrete slabs and torches to remove steel decking and girders beneath the concrete.

After the girders are cut into sections small enough to fit into a construction elevator they will be sold as scrap for about 4 cents a pound.

In some office buildings, that alteration would be impossible, but Silverstein Properties tried to second-guess the needs of potential tenants when it designed Seven World Trade Center as a speculative project.

''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need.

<snip>

MORE than 375 tons of steel - requiring 12 miles of welding - will be installed to reinforce floors for Salomon's extra equipment. Sections of the existing stone facade and steel bracing will be temporarily removed so that workers using a roof crane can hoist nine diesel generators onto the tower's fifth floor, where they will become the core of a back-up power station.

NYT


QUOTE
In November 1988, Salomon Brothers withdrew from plans to build a large new complex at Columbus Circle in Midtown and agreed to a 20-year lease for the top 19 floors of 7 World Trade Center.[25] The building was extensively renovated in 1989 to accommodate the needs of Salomon Brothers. This led to the alternative naming of the building as the Salomon Brothers building.[26] Most of three existing floors were removed as tenants continued to occupy other floors, and more than 350 tons (U.S.) of steel were added to construct three double-height trading floors. Nine diesel generators were installed on the 5th floor as part of a backup power station. "Essentially, Salomon is constructing a building within a building – and it's an occupied building, which complicates the situation," said a district manager of Silverstein Properties. The unusual task was possible, said Larry Silverstein, because it was designed to allow for "entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.

Wikipedia


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:19 AM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:35 AM
Post #4





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 1 2013, 08:32 AM) *
Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.




No he doesn't claim that a man made event is impossible... never did. He (me) claims that it hasn't been demonstrated. What has been demonstrated is that the NIST explanation is not correct.

I don't recall use of the term *building design flaws*. But if I did use this I would have meant to say that it was the nature of the engineering design and decisions which enabled the tower to collapse as it did.

When engineers design redundancy into a structure... they do so with several strategies... provide for extra strength (high FOS).. and alternate load paths which can direct loads when parts of the structure (usually columns) fail. This is connected to adequate FOS... as loads will ALWAYS find a new path in a composite structure... whether or not the new found load paths can carry the additional loads.

I would argue that the designs of both the twin towers and 7 did not meet this standard. The engineers chose to perhaps increase the FOS... an amount which is yet to be conclusively determined. But they did not provide for alternate load paths and DID use trusses which are subject to catastrophic failure. This doesn't mean trusses can't perform. They do. But they have multiple failure points and can take the entire structure with it... like a bridge failure.

So by *design flaw* I mean that the 2 designs (twins and 7) had inherent design engineering features which would not arrest some failure modes... but enable them. The designs would promote runaway progressive cascading failures.

Do you agree?
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 09:16 PM
Post #5





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE
Is that truss 2 seen in this image of Floor 5...



I try to separate the trusses from the girders because I’m thinking vertical and not horizontal.

I may need to post more pictures.

At least we know it wasn’t about fires. Imagine 1000 pounds per foot?

In architecture a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints…


Go to the top of the page
 
+Quote Post
kawika
post Dec 30 2012, 08:55 PM
Post #5





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 28 2012, 10:31 PM) *
Is that truss 2 seen in this image of Floor 5 (it's labelled "northeast looking northwest")?



The girder (going left to right, south to north), top of photo, is the #2001 between col 79 and col 44.

The beams connecting to it are the K3004 and the C3004 facing east to west.

Col 79 is just out of frame on the left.

You can the see the rather unique arrangement for the floor decking running at odd angles right over the 2001 girder. This is the girder NIST says has no shear studs at such a critical junction of decking.
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 30 2012, 11:58 AM
Post #5



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



My 2cents on how part of the demolition was carried out.

QUOTE
http://science.howstuffworks.com/engineeri...g-implosion.htm

The basic idea of explosive demolition is quite simple: If you remove the support structure of a building at a certain point, the section of the building above that point will fall down on the part of the building below that point. If this upper section is heavy enough, it will collide with the lower part with sufficient force to cause significant damage. The explosives are just the trigger for the demolition. It's gravity that brings the building down.


The lower floor atriums:



Note that there was also a 2 floor mechanical space between Floors 5 and 6 to the east of the building. And that Column 79 and 2 of the trusses ran under it.



IMO the lobby and atriums were used to kick the legs out from underneath the building. Exactly what Jowenko was describing.

Full Jowenko interview:

http://pf911t.org/forum/index.p...&p=10805945

No need to complicate matters when there were almost 6 floors vulnerable to provide the exact same effect as controlled demolition without the normal CD explosives.

Gift wrapped for those who first surveyed the building to see which sections of the structure they could manipulate.


Go to the top of the page
 
+Quote Post
elreb
post Nov 30 2012, 12:26 PM
Post #6





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



My first guess would be “Hidden in Plain Sight”.

I must also agree with preplanning.

No one runs from a bunker that is not under attack.

Can you imagine telling General Patton to run from a German airplane?

We can only guess at what plan “A” was, yet it did not pan out.

Every building in the WTC complex was planned to be destroyed, while at the same time leaving the old historical buildings alone.

When it got down to brass tacks, plan “B” was to simply drop the structure and invent obscure answers.

NOTE: I’ll get back to the Ammonium perchlorate powder after I look at it.
Go to the top of the page
 
+Quote Post
elreb
post Nov 30 2012, 04:27 PM
Post #7





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Ok, let’s see if I can come up with a condensed version of Christopher Bollyn.

100% of 911 events were preplanned for the expressed reason to keep the US in perpetual War and exposer to valuable land resources. Defense contractor are in hog heaven.

Military forces would be centrally located to assist both Israel and Saudi Arabia.

[Follow the money]

Saudi Arabia agrees to provide financial assistance and a dozen or so diversionary patsy’s.

Mossad agents agree to provide the real activity and classified exotic chemicals.

Next you have Mossad + CIA Cooperation = US Federal support.

Al-Mōsād and Al-Qaeda = 911; "The Institute" and “the Data Base”

For several know reasons, the entire WTC has to be destroyed, yet leaving all other historic buildings intact. This plan was worked out by the WTC players who had loyalty connections to Israel.

A more detailed examination of the insurance companies will expose their hold cards.

Some folks may not like it, however I feel a third plane was intended for 7WTC but failed to arrive.

It is my “Guess” that 7WTC was the center of operations

Several floor had under gone major remodeling including the 5th. No one would think anything unusual was going on. As stated, fireproofing mixes well with exotic chemicals.

Wasn’t the bunker completed in 1998? [Great timing]

A “New Pearl Harbor” June 1997 "Statement of Principles" and proceeds "from the belief that America should seek to preserve and extend its position of global leadership by maintaining the preeminence of U.S. military forces.
Go to the top of the page
 
+Quote Post
elreb
post Dec 3 2012, 11:29 PM
Post #8





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



EMERGENCY OPERATIONS CENTER:

During major emergencies and special events, OEM activates the City's Emergency Operations Center (EOC). With space for more than 130 representatives from local, state, and federal agencies and private and non-profit entities, the EOC functions as a central clearinghouse for information coordination, resource requests, and decision making.

The Emergency Command Center was on the 23rd floor 7WTC.

At 9:03 am, the doors to the command post were locked…no one could get in.

At approximately 9:44 a.m., after the report of a “third” aircraft heading into the city and news that the Pentagon had been attacked, a Deputy OEM Commissioner ordered the complete evacuation of 7WTC.

For some odd reason, the fire suppression system had been deactivated…in spite of the fact that NYFD was using its standpipes.

It seems rather “Irresponsible” to draw conclusions without first reviewing the “Facts”.
Go to the top of the page
 
+Quote Post
elreb
post Dec 9 2012, 06:50 PM
Post #9





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



If you reread Shyam Sunder’s report slowly and completely then

Include the 3 steel analyst reports showing sulfur and Iron Oxide embedment then

Study the several dozen pictures of “Vaporized” steel then Add in eye-witness accounts

You get a “Man-made” disaster.

We even have 4 rolls of “A” drawings from Skidmore, Owings & Merrill dated 1986.

SOM received a gold LEED rating for its sustainable design components on 7WTC.

These guys also did the new 7 WTC, 1WTC and the Sears tower

"Even though Building 7 didn't get much attention in the media immediately, within the structural engineering community, it's considered to be much more important to understand," said William F. Baker, a partner in charge of structural engineering at the architectural firm Skidmore, Owings & Merrill.

"They say, `We know what happened at 1 and 2, but why did 7 come down?' "

Engineers and other experts have already uncovered evidence at the collapse site suggesting that some type of foul played a significant role in the building's demise, but they expect to spend months piecing together the picture of what remains a disturbing puzzle
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 10:57 PM
Post #10





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



The entire WTC complex had to be destroyed...it is just that simple.

This was accomplished. Party time.

The following insurance companies were liable to Silverstein's compensation demand:

Swiss Reinsurance Co. [lead insurer] [Warren Buffett invested $2.6 billion]

Chubb Corp.,

Lloyd's of London,

Employers Insurance of Wausau

XL Capital Ltd.

St. Paul Travelers,

Industrial Risk Insurers [a former General Electric Co]

Allianz SE

Zurich American Insurance Co.

Royal Sun Alliance Insurance Group's Royal Indemnity Co

Note:

Warren Buffet was at Offutt Air Force Base on 911 entertaining quite a few VIP's from WTC.

You know…the same place where Bush 43 landed that day.

Oh, and Bush 41 was drinking champagne with the Saudi Arabians…

Here is an example of “Meat on the Bone”

The Oracle of Omaha is unlikely to have predicted this. Berkshire Hathaway, Warren Buffett's holding company, said that it would pour an extra $2.6 billion into Swiss Re to prop up the company's capital base after the reinsurer posted an $861.3 million loss .


Remember…Swiss RE was the lead company to pay for the 911 WTC.


For the record, Berkshire owns 13% of American Express. American Express is connected to Solomon Brother thru Citigroup.

5 largest reinsurance companies

1. Munich Reinsurance Company—$31,280 [Berkshire owns 10.5%]

2. Swiss Reinsurance Company Limited—24,756 [Berkshire investment]

3. Hannover Rueckversicherung AG—15,147

4. Berkshire Hathaway Inc. —14,374

5. Lloyd’s—12,977

Now…when US corporations need money, they get TARP funds. Therefore thru a maze of mind-blistering banking moves…in the end…the American tax payer gets the bill.
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 11:00 PM
Post #11





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



A section of an A36 wide flange beam retrieved from the collapsed World Trade Center Building 7 was examined to determine changes in the steel microstructure as a result of the terrorist attack on September 11, 2001.

This building was not one of the original buildings attacked but it indirectly suffered severe damage and eventually collapsed.

While the exact location of this beam could not be determined, the unexpected erosion of the steel found in this beam warranted a study of microstructural changes that occurred in this steel.

Examination of other sections in this beam is underway.

ANALYSIS

Rapid deterioration of the steel was a result of heating with oxidation in combination with intergranular melting due to the presence of sulfur.

The formation of the eutectic mixture of iron oxide and iron sulfide lowers the temperature at which liquid can form in this steel.

This strongly suggests that the temperatures in this region of the steel beam approached ~1,000ºC, forming the eutectic liquid by a process similar to making a “blacksmith’s weld” in a hand forge.
Go to the top of the page
 
+Quote Post
elreb
post Dec 24 2012, 11:01 PM
Post #12





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



June 3, 1997 “Statement of Principles”

American foreign and defense policy is adrift. Conservatives have criticized the incoherent policies of the Clinton Administration. They have also resisted isolationist impulses from within their own ranks. But conservatives have not confidently advanced a strategic vision of America's role in the world. They have not set forth guiding principles for American foreign policy. They have allowed differences over tactics to obscure potential agreement on strategic objectives. And they have not fought for a defense budget that would maintain American security and advance American interests in the new century.

We aim to change this. We aim to make the case and rally support for American global leadership.

As the 20th century draws to a close, the United States stands as the world's preeminent power. Having led the West to victory in the Cold War, America faces an opportunity and a challenge: Does the United States have the vision to build upon the achievements of past decades? Does the United States have the resolve to shape a new century favorable to American principles and interests?

We are in danger of squandering the opportunity and failing the challenge.

We are living off the capital -- both the military investments and the foreign policy achievements -- built up by past administrations. Cuts in foreign affairs and defense spending, inattention to the tools of statecraft, and inconstant leadership are making it increasingly difficult to sustain American influence around the world. And the promise of short-term commercial benefits threatens to override strategic considerations. As a consequence, we are jeopardizing the nation's ability to meet present threats and to deal with potentially greater challenges that lie ahead.

We seem to have forgotten the essential elements of the Reagan Administration's success: a military that is strong and ready to meet both present and future challenges; a foreign policy that boldly and purposefully promotes American principles abroad; and national leadership that accepts the United States' global responsibilities.

Of course, the United States must be prudent in how it exercises its power. But we cannot safely avoid the responsibilities of global leadership or the costs that are associated with its exercise. America has a vital role in maintaining peace and security in Europe, Asia, and the Middle East. If we shirk our responsibilities, we invite challenges to our fundamental interests. The history of the 20th century should have taught us that it is important to shape circumstances before crises emerge, and to meet threats before they become dire. The history of this century should have taught us to embrace the cause of American leadership.

Our aim is to remind Americans of these lessons and to draw their consequences for today. Here are four consequences:

• We need to increase defense spending significantly if we are to carry out our global Responsibilities today and modernize our armed forces for the future;

• We need to strengthen our ties to democratic allies and to challenge regimes hostile to our interests and values;

• We need to promote the cause of political and economic freedom abroad;

• We need to accept responsibility for America's unique role in preserving and extending an international order friendly to our security, our prosperity, and our principles.

Such a Reaganite policy of military strength and moral clarity may not be fashionable today. But it is necessary if the United States is to build on the successes of this past century and to ensure our security and our greatness in the next.


Note: To some degree, Building 7 may have been the original target…


"All the evidence that we stored at 7 World Trade, in all our cases, went down with the building," according to US Secret Service Special Agent David Curran -- the number three guy in that office.

"We lost our network, we lost all our computers, we lost all the equipment that we use as Secret Service Agents.”

“Everything from machine guns to our shotguns to our electronic equipment that we use."

“A lot of cases had to be closed as a result of losing that building.”
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 12:35 AM
Post #13





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Patsy UA 93 was to leave around 08:01 but was delayed until 08:42.

Newark International Airport is about 9 miles from WTC.

Patsy AA 11 took off around 07:59 made it to WTC by 08:46.

Logan is 190 miles from WTC

This is what caused things to go wrong.

I’m still guessing that 7WTC was the original [first] target.

The timing was just a little off…
Go to the top of the page
 
+Quote Post
Ricochet
post Dec 25 2012, 08:15 AM
Post #14





Group: Active Forum Pilot
Posts: 746
Joined: 25-April 08
From: Canada
Member No.: 3,225



If WTC 7 fell straight down how could it damage the top of the Fiterman building across the street?
Go to the top of the page
 
+Quote Post
SanderO
post Dec 25 2012, 10:15 AM
Post #15





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



What does "fell straight down" mean? And who said it?

Wasn't something similar said about the twin towers? Their debris was scattered out to 400+ feet from each tower.

Language is not precise... and it's hard to know what people mean by what they say. And then when others repeat something they often add or alter the language and the meaning.

It's pretty clear that researchers working with limited resources are limited in what they can know with 100% certainty/accuracy.
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 12:09 PM
Post #16





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (Ricochet @ Dec 25 2012, 02:15 AM) *
If WTC 7 fell straight down how could it damage the top of the Fiterman building across the street?

Fiterman Hall was a 15-story building at 30 West Broadway (also called 81 Barclay Street).

Actually, Bldg 7 was said to have fallen into its own footprint.

In reality it rotated and fell North West.

The West Broadway subway tunnel on the South East corner was heavily damaged.

Think about that…the building fell away from the subway.

Note in the picture that there was lots of water and meat on the Bone.

The picture also shows that the building did not fall on West Broadway.

Go to the top of the page
 
+Quote Post
kawika
post Dec 25 2012, 05:32 PM
Post #17





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (elreb @ Dec 23 2012, 02:09 PM) *
Fiterman Hall was a 15-story building at 30 West Broadway (also called 81 Barclay Street).

Actually, Bldg 7 was said to have fallen into its own footprint.

In reality it rotated and fell North West.

The West Broadway subway tunnel on the South East corner was heavily damaged.

Think about that…the building fell away from the subway.

Note in the picture that there was lots of water and meat on the Bone.


To be absolutely clear, just the east face of WTC7 rotated and fell NW. If you look closely in the videos you can see it falling last. It separated from the north and south walls and clipped the Fiterman Bldg.

The west wall ended up on top of the pile, due east, no rotation.
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 05:47 PM
Post #18





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Kawika is one of the best examples of a “Team player”.

He always adds positive information.
Go to the top of the page
 
+Quote Post
elreb
post Dec 25 2012, 09:36 PM
Post #19





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



More data: Please note that the data comes from Elreb and the Team...

South looking north...

Go to the top of the page
 
+Quote Post
elreb
post Dec 26 2012, 07:11 PM
Post #20





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



“What little damage that the Verizon building received”…came from the demolition of 7WTC.

The picture indicates one phase of destruction was from floors 5 to 7.

I would “Guess” that demolition came from 3 levels with one final kicker at the end.

You know…the “Pull. The building had been weakened by 30% early in the morning.

Now that I have the prints, I can put together a good “guess” of progression of events.
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #21



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 12:30 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The architectural plan calls out a truss which runs between column 78 and 76. Column 79 and 80 in the photo appear to be adjacent to Con Ed.

The FEMA diagram appears to be mis-labeled and the photos are as well. It's hard to make any sense from these 4 depictions which are intended to be of the same structure.

Who added to column numbers on the photos?

What's the deal with the space frame over Con Ed? Why does FEMA leave this out? It seems to be this was also a long span structure very much like a truss bridge over Con Ed.

The girder labeled truss 2 is spanning over Con Ed not east of it... in the lower photo. Perhaps the structure was not suspended from that girder labeled truss 2 which would be the bottom chord of a truss.. yet to be constructed.

I wouldn't give up... but this is getting curiouser and curiouser.

Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:16 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Don't worry about your spelling... we can read through typos.

This is a good find but not unexpected as the egress stairs were, I believe, on the east and west side of the cores were the trusses 1, 2 and 3 were located with 1&2 being on the east side.

Now we need to find out what was on "the other side" (core side) of those stairs... equipment and so forth.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 03:35 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Thanks! To both.

thumbsup.gif

QUOTE
What is 79 doing?


The fall guy. Literally.

This post has been edited by onesliceshort: Dec 30 2012, 03:36 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 09:34 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The transfer trusses and girders were connecting all the column lines you mention. If one of the elements under the penthouse... including T truss 1 (if we are to believe the plans) ... fails... the failure propagates to adjacent structures... especially transfer structures.

The East West Truss 1 was bearing on a north south transfer girder (see the lower right built up girder in the elevation of Truss 1... it in turn was supported on 2 columns (apparently)

Note in the confusing FEMA cartoon that T1 and t2 were both below the penthouse. The drop of the penthouse indicated that those two trusses failed... or the columns supporting at their west or east side. T1's east side was supported by another transfer girder bearing on 2 columns.

The take away (for me) is that once some part of this (Rube Goldberg) system of load transfer structures failed it would propagate through the structure. The plunge of the east penthouse is the tell tale sign that those structures failed.. BEFORE the rest of the tower drops.

The kink IS on/through the column line just next to Con Ed on the east which is also the line where T1 and t2 are supported on their west side.

The observed movements were:

swaying east-west for about 6 seconds
east penthouse collapses
west penthouse collapses
entire tower drops

I would add in some guesses:

single axial load path failure (transfer girder at east end of T1??)... (cause indeterminate)
swaying east-west for about 6 seconds
T1 and T2 buckle or fail (cause indeterminate)
east penthouse collapses
columns on north side of con ed fail.. south side... these support the 8 cantilever girders and the columns inside the north facade
T 3 buckles or fails (cause indeterminate) (at west side of 8 cantilever girders )
west penthouse collapses
parts of the space frames on the north side of the east and west wall fail/buckle fold onto the footprint
The entire tower no longer has any axial load paths from floor 8 to the foundations.
drops for 104' with sections of the floor still attached to the perimeter columns
entire tower drops
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 31 2012, 06:28 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Oh man...my bad doh1.gif

So would the splices shown be a logical area to attack?

Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 03:16 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



After seeing these photos (again) it reinforces my belief that there was a runaway failure in the transfer trusses and other load transfer girders. But I see that there was an extensive braced frame 3D lattice which also seems to appear to span over Con Ed. That too is suspicious.

Finally seeing the numerous splices which were used to field-erect these heavy panels into trusses I find many opportunities and vulnerabilities. I don't know whether or not these details were available to the ASCE back in the period just after the event, but it seems to me that this clearly should have received lots of scrutiny. Apparently all the steel from 7 is gone. If true, that would leave the analysis to theoretical modelling.

Why hasn't AE911T seen this?
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 05:45 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Gee, no wonder Mayor Rudy Giuliani, Police Commissioner Benard Keirk and Fire Department Commissioner Thomas Von Essen received honors from the Queen of England.

Everyone gets a pat on the back, a promotion and some bonus buck$.

In January of 2002, Giuliani starts “Giuliani Partners” which included Kerik, Von Essen, Matthew Mahoney [Deputy Director of Advance for the Mayor’s Office], and Pasquale J. D'Amuro, [Assistant Director in Charge in the Federal Bureau of Investigation's New York office and an Inspector in Charge following the September 11, 2001 terrorist attacks].

Who are the real crooks here?
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 04:43 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where is the weight on this blueprint?

Not over 79 or 80…

Does anyone know what was under the East penthouse?

The original roof prints show roof drains.

My drawings show satellite dishes and communication.

OSS

The bunker was also a good place for mischief. Good reason to have a lock down.

Kawika

Many Thanks to the “Team”!

I have an unfair advantage to a lot of unpublished data.


Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 12:08 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



What you showed is not a truss.. it's a diagonally braced frame. Ask an engineer. Do you have a section or shop drawing for this truss?

Diagonals do not a truss make.

Many buildings have diagonals and use triangulation to make them stiffer for wind shear. These are not trusses.

Learn about trusses:

https://en.wikipedia.org/wiki/Truss

diagonal braced frames:

http://www.steelconstruction.info/Braced_frames
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 09:17 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



I'd have to read through this a few times but that's what I call meat on the bone!

For the greenhorns among us, are there any visual interpretations of the layouts described?

Could the 7,500 tons of cooling towers on the 45th floor be the reason that Column 80 was targeted?
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 01:28 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Check this out.

5th floor stair #1 next to Truss #3 and stair #2 next to Truss #1 and #2.

Think about that and the Hess/Jennings explosion.

[I know...my spelling is off]



Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 01:43 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Meat on the Bone…First time ever shown…better save a copy...

Actual construction prints…





Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:46 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.
Go to the top of the page
 
+Quote Post
kawika
post Jan 4 2013, 06:07 PM
Post #22





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Smoke before WTC1 collapsed indicates an isolated event within WTC7.

The building had smoke evacuation systems for the very purpose of keeping areas free from smoke. The mechanical systems were operational after WTC2 collapsed.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:41 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

You may be not understand how any building would and do collapse or fall and especially the examples of CDs. In them only a very few columns are destroyed. Once this happens there is no longer adequate load paths to support the structure...it then COLLAPSES and all the other columns are buckled.. or break apart at their connections.

Look at 7's destruction like this... it begins with one or two failures... which propagate to fail other parts of the structure... this is *using up* the reserve strength.. whatever it is.. As this process continues...(usually at an increasing failure rate) it reaches the point where the reserve strength has all been used up (destroyed columns / axial load paths).. and then rapid failure occurs of all remaining structures. This could mean... for example.. all the core structures are destroyed and only the perimeter columns are left to support the entire mass... if one more failure occurs all the other remaining columns are seeing loads in excess of their ultimate yield strength and fail in a new york moment... rapid onset of collapse. That is precisely how a *global* failure occurs.

As we don't see any evidence of perimeter column failures with the exception perhaps of the SW corner gash.. and that did not propagate visibly... corner are sort of the end of the line... the failures apparently were inside the structure NOT at the perimeter columns.

Also consider that the perimeter columns were all connected into a huge moment frame... with massive spandrel beams. These beams supported the facade side of the floors as well as providing bracing for the columns. The moment frame at the perimeter can be see as a massive vierendeel truss and would act almost as a single element.

The facade coming down as what appears to be a complete 4 sided unit indicates that the perimeter frames were largely intact, but what supported them was removed for at least 8 floors... and the most likely 8 floors were the ones from ground to floor 8.
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:45 AM
Post #22





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



A bit off topic, but the irony is just too much for me. This is like letting the foxes guard the chicken coop. Other members of this task force were also at the WTC on 9/11.


QUOTE
REPORT OF THE NEW YORK CITY NEW YORK STATE TASK FORCE ON BUILDING AND FIRE SAFETY

Task Force Members

Jerome M. Hauer, Commissioner, Co-Chair
New York State Division of Homeland Security and Emergency Services

NYC/NYS Task Force Report


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:46 AM
Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 07:58 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 01:31 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Oops, I ask the wrong question.

I meant to ask “What was in the East Penthouse?”

Apparently, mechanical stuff like air handlers.



Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 28 2012, 09:09 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.


Are there any details on the OEM diesel generator upgrades? Extra fireproofing? Are there strategic points in the steel framing/core within the area of the diesel fuel tanks where this "fireproofing" may have been applied?

Could fireproofing with this exotic accelerant be applied at strategic points? Only to combust at a certain temperature? Or chemically ignited through the sprinkler system?

Did it need a kick-start because they f-ed up Plan A?

Those images are unreal.

This post has been edited by onesliceshort: Dec 28 2012, 09:10 PM
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 10:51 PM
Post #22





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The East Penthouse fell in, but the sunlight that shown through the windows was only one level, not the entire height. No exterior north columns were affected during this event.

If the three trusses were failed they would have compromised maybe 10 columns. Some of those would have been a few north face columns affected by the loss of the E&W end transfer girders.

We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.

This post has been edited by kawika: Jan 1 2013, 10:52 PM
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 06:07 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:50 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



So now magically Truss #3 is not a truss and the structural prints are a fraud!

Between column 61 and 62 it is called truss #3.

I have both “S” prints and “A” prints.

Why can not you stay on topic?

Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 02:52 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 28 2012, 11:12 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika)
Take a look at the column. Both the inner and outer webs were vaporized. It appears that there was enough left over after the collapse to continue the erosion on this column while it was horizontal.


Exactly bro.

Is there a timeframe for when the WTC7 steel was removed? I've read the date 29th September but had also read somewhere that it had been removed within days (not sure where I read that).

Just need to keep chipping at and narrowing down the arguments lads.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 10:51 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

We would have to see the plans of the alteration. My guess, without seeing them is that these were long span column free office floors with a few exceptions such as 79, 80 and 81. Two story spaces could be created for trading rooms without removing any columns or leaving them in place in the middle of the two story spaces.

If the east penthouse did collapse through the entire visible portion or the north facade we have to conclude that the axial supports were no longer there... as far down as we can see.

If the penthouse represented an exceptionally large load... more so than the same for each of the floors below its footprint... it could be the driver of the pressure pulse. Just a guess here. And the drop could be from failures of the structure in the region below it from floors 1-8.
Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 11:26 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE
The “trusses” were designed to transfer the load from columns offset above into two columns below.
The actions we see in the videos require a whole bunch more than they had control over. Like every exterior column being ~simultaneously severed over eight floors.
Otherwise the building would have toppled over.

I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]
Go to the top of the page
 
+Quote Post
SanderO
post Jan 4 2013, 02:05 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Smoke inside a building space with non operable windows that are not broken (to allow smoke to enter) would be from a fire inside the space or from smoke finding its way in through air supply or return ducts... if all doors to the space were closed.

The other possibility is that part of the floor or ceiling was breached and smoked entered... more likely would be from below (floor) as smoke usually rises.
Go to the top of the page
 
+Quote Post
elreb
post Dec 27 2012, 07:10 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



First picture shows sulfur activity on the towers.

Second picture shows sulfur activity from 7WTC



Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 01:20 AM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Attention…all readers

Do to the simple fact that “SanderO” refuses to stay on topic and has a mission to waste P4T space with useless and worthless text…

I will no longer respond to any of his wandering false, inaccurate, incorrect, inexact, and invalid, off beat, unsound, untruthful, unproven and wrong blathering.

I recommend that all serious researchers to ignore him.

I am very close to solving the destruction of 7WTC and do not need distractions.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 29 2012, 09:23 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Elreb,

Not a bad verbal description of the strategy for axial load transfer. The 8 tranfer girders were bearing on the north side of core... with the cantilever ends supporting 8 columns 41 stories tall each... at the inside face of the north face. If the transfer girders (cantilevers) and transfer trusses failed as they were interconnected and supported multiple columns above and if they failed could cause a lot of the tower from above flr 7 to have no load paths to the foundations... and these structures topped out at 100' above the ground... the same distance of the free fall decent seen when the building came done. This also happens to correspond to the region of inward bowing of the north facade.

There is strong evidence for their having failed prior to the obvious tower movements. I suspect that not only did this transfer structures collapse (from whatever cause)... but the 8 story trusses on the north of both the east and west walls may have been pull in or forced out when the more central structures failed. This would essentially leave the tower from floor 8 up with nothing to support it and 100 foot descent would meet no significant resistance.

The problem is, however, that there are very precise traces of the downward motion and not only did it average at FF for 100 feet, but there was a period of MORE than free fall. So there was something else in play of this is true? Could this be a spring action of some sort? If these velocity time/motion studies are accurate the 100 foot decent is not a simple gravity driven drop.
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 06:28 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I’ll bet very few people knew that the Jennings stairs #2 were on the same level where the engineers had their office and shop. [Stairs #1]

May be unrelated, yet interesting.


Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 09:09 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Does anyone know what was under the East penthouse?


I think that this area should be dug into.

Weren't there three double height trading floors on the upper levels?

Edit: thanks guys for the extra plans - much appreciated. If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

This post has been edited by onesliceshort: Jan 2 2013, 09:10 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 11:45 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



In an long span open office structure the core carries less than half the floor loads. But if the design is a square, rectangle or trapazoid the four corners of the core will carry much larger floor loads than any of the columns in the plan. You can see this by noting the size of the sections for these 4 columns. In the twins core it was 501, 509, 1001 and 1009. We had data for the twins columns and those four were each 2x as string (cross section area) as the next strongest column and as much as 10x as much as inner core columns and almost 15x as strong as one central core column.

The column (79) which NIST focused on was one of those columns which carried a large area of floor loads. But this NE corner also was supported down low on the transfer structures. Obviously the engineers / designers chose to support the heaviest equipment where the strongest columns were located as well as considering the proximity to riser shafts and so forth. Did the additional mass of a storage tank drive this column down? Of course it contributed to the axial load... but the columns were sized up to carry this load.

The weakest columns are in the core area and support the smallest floor loads...because the core is filled with shafts for elevators and mechanicals. However when a stronger column fails (for whatever reason) its loads are then redistributed to first adjacent columns and they may be much weaker to begin with and pushed close to or over their capacity. And this is how load capacity is destroyed progressively and can cascade rapidly through the structure leading to a *global* failure of all columns and then rapid onset of collapse.

A telltale sign of load redistribution can be detected if the building twists, torques, tilts even a few inches. This WAS measured prior to any naked eye motion... in 7 and in WTC 1. If this is in fact what happened then this rules out an instantaneous destruction of all load paths (80 or 81 columns over 8 floors INSTANTANEOUSLY). That would produce a straight drop... with no distortion of the top.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 04:33 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



79 got blamed but he was a diversion.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:03 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



As expected, you are missing the point…

And again…we are only talking about building 7 and its 3 trusses.

Please look at the title of the thread!

Why is it hard to stay on topic?

All three trusses have triangles.

Here is truss 3…see any 90's?

Note: The Vierendeel truss is a structure where the members are not triangulated but form rectangular openings… As such, it does not fit the strict definition of a truss; regular trusses comprise members that are commonly assumed to have pinned joints, with the implication that no moments exist at the jointed ends.

Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 04:18 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Hess/Jennings explosion...

QUOTE
There was nothing under the 6th floor landing. This tends to support a truss event that was witnessed by Jennings. Or it could be just taking the stairs out of service.


I agree as long as it was part of the op. There were no Transformers close to this area.

I still like the fire hose located on #79.



Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 08:33 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



No I don't think so... those are the standard/regular beams framed into a girder... probably near one of the corners.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 10:17 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Elreb,

Not all trusses have diagonals or triangulation... the triangle is used because it doesn't deform.

The twin towers used Vierendeel trusses which have no diagonals... they relie on very stiff 90° joints.

A truss is really a beam which has most of the web removed and gets its strength by having the tension member and the compressive member separated... the web is reduced to the diagonal (triangular) chords which links them together in a beam action... tension on bottom and compression on top.
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 01:45 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I think the bunker improvements tie together with mischief.

New Pearl Harbor comes out in June of 1997.

The date of the Mayor’s Office of “Emergency Management” was perfect timing.

They range from 1998 to 1999 and gave them open run to the 7th floor and the floors below it.

Core drilling and fireproofing including 3M.

This would have been a great time and no one would think twice.

Bush 41 cheats the election in 2000 and in office by January 2001.
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 04:17 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



It would seem that columns and beams did not need to be cut…only weakened.

Properly, placed “exotic chemicals” would simply reduce the steel’s ability to hold its intended load.

Paper thin steel…my…my…all you need is gravity.
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 01:40 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Keep this page handy so we can talk about it.

Floors 5, 6, and 7 are great places to “Trick-Out”.

http://www.wtc7.net/articles/FEMA/WTC_ch5.htm

Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 09:30 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Some information about welds:

http://www.weldingtipsandtricks.com/full-p...ation-weld.html

And welding failures:

http://www.welding-advisers.com/Welding-failures.html
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 12:38 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Bunker is filled with smoke…

The security officer, who has reached the 30th floor by this time, heads back down the stairs.

When he reaches the 23rd floor, where the headquarters of New York’s Office of Emergency Management (OEM) is located, he opens the door to check for any members of staff that might still be there, but finds the area filled with smoke.

What caused the smoke? Did the bunker even have windows?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 12:07 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



There is good visual evidence that the east penthouse dropped through the entire height of the tower. Achimspok and or femr2 analyzed the reflection / distortion of the glass which appears to be a pressure pulse of some sort caused by the motion of the penthouse dropping. This could have been a small pull in of the floors as it dropped down.

There are enhanced videos which show this and it is quite convincing that the event traveled down through the tower. You can find these vids at the 911FF or at one of the aforementioned sites.

We certainly do need to have as much detailed information about the structure (plans, sections, details, specs, test logs,shop drawings, photos during construction) as well as data derived from the movements of the tower. Getting this has been like pulling teeth. It all should have been available to the public at one site.

I suspect that without actual images of the area in question just prior to collapse or the steel from the area post collapse for examination and testing... it will be impossible to reach a conclusion as much as a well thought through speculation. If all of the framing and loading data were available FEA could be run to simulate the collapse modes. But this, I suspect would take enormous computer power, and require many different *what if* inputs. However it should be possible to produce a model (gif simulation) which matches the actual observations unlike the NIST's simulation / offering.

Understanding will come from accurate observations, knowledge of the actual structure and technical knowledge of physics, engineering and materials science. Without this one can only have a cartoon conception of what happened.

I believe the initiation from whatever cause(s) was in the location on floor 5,6 & 7 east side where the transfer structures were located which I have been saying for a year.

Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 10:52 AM
Post #22





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The exterior distortion races from top to bottom. This tells me it is a pressure pulse in the exterior columns, not the penthouse dropping physically through all those floors.

If it went more than one floor you would see a lot of daylight through the north windows, but you don't. You see one floor of daylight.

If the floors failed from bottom up as we were told, the distortion would race up, not down. The floor edges had a double row of shear studs on the wind girders that were right behind the granite spandrels. Don't you think the granite would have been flying off under the stress of floors hinging downwards?

Here's a screenshot of the plan showing 38 shear studs on the north wind girders. Note that these are grouped much closer than the floor beams. 38 studs over ~23 feet as opposed to 24 studs over 44+ feet.

http://img221.imageshack.us/i/windgirdershearstuds.jpg

If the floors were failing inside, you would have seen evidence of this outside.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 08:28 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Thanks DYEW.

QUOTE
''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need......entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.



What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents

This post has been edited by onesliceshort: Jan 3 2013, 08:29 AM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 09:22 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095





Where was e "Hess landing" in relation to that two floor "mechanical space" gap? Where the two trusses intersect.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:44 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Are you suggesting that the East Penthouse mass drove down because the trusses and structure below failed? Obviously if the structure supporting a mass above is removed... gravity will drive the unsupported structures downward.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 12:27 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Interesting comment Kawika


Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:06 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



I give up.

As for the FEMA diagram, if the square section in the cartoon is meant to depict the entire ConEd area, then yes, something's wrong there. The eastern face of the ConEd concrete structure appears to run along beside column 79 and the shipping ramp

http://img593.imageshack.us/img593/2897/200719853.jpg

http://img196.imageshack.us/img196/9862/200719852.jpg

Edit: but the trusses and columns match with elreb's plans

http://www.rebrammer.com/images/colm80crop.gif



This post has been edited by onesliceshort: Jan 1 2013, 12:14 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 08:03 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS.

Correct.. these are the so called beam stubs and for columns called beam stub outlookers and used to connect beams to columns and in this case truss panels or diagonal struts to. All of these connections use 3/4"Ø bolts and gusset plates.

I have long claimed that these were the vulnerable part...where they were bolted. One side is welded in the factory. Welds are rated for strength just as bolts are. The important consideration may be the ultimate strength of the welds.

If you consider the that the strength of the steel beam or panel of a truss member is directly proportional to is criss sectional area you can see that connections represent a very different animal.

Let's suppose that the beam is a very heavy member carrying very large loads and is say 2" thick steel. How do you weld a connection which has the full 2" thick of steel? These are call full penetration welds. With thin material this is not especially challenging.. but I'd bet that getting a full pen weird with 2" plate is.

In fact some of the very thick plates welded to make up box sections.. columns showed these welds opened after the destruction.. they failed and parted. Architect Robert McCoy who is now on the board at AE911T told me that when the towers steel box columns were being fabricated many of these were rejected on inspection for the reason I noted.

You will also find testimony from several engineers,and I believe professor Corbet that there was concern about the performance of the connections. It seems that little was done to pursue this aspect of building performance.

I think you have correctly identified an area of concern and something I have been writing about since 2010.

Elreb,

You don't have to advise the readers what is valid and invalid. Readers are intelligent enough to sort out relevant information from spam. As I have written, any number of times, I am wrong as others are, and when it is pointed out to me I correct my statements. I believe the information about structure I provided are on topic and useful in understanding this complex problem.

As per your usual *style* you attacked me not the information I provided about trusses and braced frames... neither of which I wrote, but simply referenced.

Happy New Year
Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 10:57 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617




Happy New year
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 01:48 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Virtually every high rise building in NYC has mech equipment on the top most floors and all have water tanks on the roof... often concealed behind structures or screens of some sort. Having worked on the 74th Floor of the Empire State Building with my office windows overlooking lower Manhattan I could see almost all the roof tops and can attest to this. Of course this makes perfect sense. Now there are all manner of communications antennas added to HVAC and building services up there.
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 02:33 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where are the bathrooms?

By the way...the fire cabinet and riser were mounted on column #79.



Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 11:15 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The drawing in your last post is NOT a truss... it is as diagonal braced frame. I am not sure you understand how a truss works... maybe you do, But not from your depiction in posting #47.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:56 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



"Mr Koenig" at FEMR's site labelled them. I can't vouch for them but the guy seems to know his stuff.

Mr Koenig's collection of structural photos only reach Floor 5 (slab). There must be photos out there of Floors 5 to 8 being withheld. I mean, if those photos were taken out of structural engineering interest, why would the photographer stop at the most interesting section of the build?
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 01:42 PM
Post #22





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Nice find. Worth exploring further.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:22 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

I don't consider anyone an idiot. I have found most of those interested in 9/11 to be intellectually curious and intelligent. I have also found that many are not very good observers (not trained or experienced) and most have little to no technical knowledge of physics, statics, engineering and so forth. When most people confront complexity in their lives they need to have cartoon like understanding and have a working user interface. I consider myself only slightly advantaged with respect to the WTC destruction as I have been an architect since I graduated from college. I am not an engineer, though I was taught basic engineering, and use it in my work... I am not a physicist, though I did take classes in this and chemistry half a century ago. I have acquired other skills related to my vocations and non professional interests. All of these inform how I understand the world. I am certainly not an expert... and never claimed to be.

Enough said on that.

These photos are interesting. I believe I've seen them. But I am a bit confused as well (something normal with me). In the ,lower image it appears that the Con Ed facility reaches right up to Vesey Street and is further south than the braced frame compared with the FEMA cartoon. Also it the number of columns adjacent to Con Ed on the east is different in the cartoon and the image. And the top image Con Ed appears to be at least one column bay to the north (sort of where I thought it was). And then I don't see the trusses 1&2 either.

In the top image I do see what appears to be a 3 dimensional space frames over the sub station which are labeled 3,4 & 5 (flrs levels). But the sub station appears (mostly hidden) and well to the north of Vesey St. Whatever that 3 D structure is called it doesn't seem to be depicted on any of the FEMA cartoons... and what is labeled at truss 2 appears to be at the East wall.

I cannot dispute that these are photos taken during construction. But I can't make sense of them and relate them to the FEMA cartoons. And frankly I can't even figure out the levels or the column #s. Could this possibly be a reversed of composite or fiddled with image?

Am I the only person confused by this? I see some resemblance to parts of the FEMA cartoon, but more that looks nothing like it.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 08:13 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095





Now that's what I'm talking about. Visuals. First time I can visualize what Jennings was describing.

Medium rare, button mushrooms and onions... cheers.gif

Edit: there was also something I recall about the "computer room". I'll have to dig it out.

This post has been edited by onesliceshort: Jan 3 2013, 08:14 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:13 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 06:23 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



You wouldn't have to weaken the trusses if you took out the columns which support them... no?
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 08:48 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika)
We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.


That's what has been stumping me for days looking through the floorplans that we have.



The penthouse would have to fall through six columns for 45 floors (or 38 if we agree that the lower floors were kicked out).

And then of course the global failure



As elreb has said, the trusses and the lower 7-8 floors was only part of the op.

Judging by the visuals alone, the east penthouse looks to have been used as the "kicker" to take out the already weakened trusses/lower floors, but what brought the whole building down like a stone, as kawika says, is a mystery to me. Unless there were "unusual events" on the upper floors as well.

2cents
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 01:03 PM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Did the bunker even have windows?


Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

Edit: the bunker had its own air supply so I can't see it having windows?

This post has been edited by onesliceshort: Jan 4 2013, 01:08 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 09:00 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Some 3 dimensional (partial) images of trusses 1 and 2





Any use?
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 05:49 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Back to my original guess.

Patsy UA 93 was to leave around 08:01 but was delayed until 08:42.

Newark International Airport is about 9 miles from 7WTC.

Patsy AA 11 took off around 07:59 and its drone made it to WTC by 08:46. [Logan is 190 miles from WTC]

The “Bunker” was locked around 9:03 even though they had stinger missiles and radar on the roof.

If they believed that a 3rd plane was on its way, why did they not call for several AH-64 Apaches?

Patsy UA 93 missed its crossover with drone SB7; thus changing the plan.

The Hess/Jennings explosion may have been time for the intended strike; however it became a wave off.

If 7WTC were prepped in 1998, then it would have to have a plan to justify the destruction!
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 11:11 AM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Interesting comment Kawika

The floors likely were not falling. I think your comment on the window distortion moving down suggests that the facade bulging was an event originating at the top. This may suggest that the entire frame above the transfer structures was intact with only a few column line hanging held by beams for some period and then the collapse occurred. Perhaps the mass of the east penthouse was large enough and it blasted air outward as it dropped.... displacing enough air in its path to bulge the windows???

These buildings has closed windows and it's conceivable that a large collapse of flooring somewhere would displace air. I don't know that it would be enough to created the buldge in the windows. I don't think this pulse of air would effect the frame itself. The curtain wall was not an especially robust attachment to the spandrels and was bolted to clip angles. Also I would think that the curtain wall was somewhat flexible... especially the glass which is bedded in silicone.

I am guessing the direction of movement of the bulge suggests a downward moving object creating the over pressure.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 02:25 PM
Post #22





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Thanks Elreb....

I will study these.. Are there drawings for the braced frame which appears to be over the sub station in the photos

I think this area is of interest.,

Mr K obviously was confused. He tried.. and made a mistake or two... we all do.
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 02:31 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Just for general knowledge:

The north east corner of floor #3 had stairs #3 and #4, plus a HC elevator that went to the 2nd floor.

The second floor had an auditorium and a stage.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 10:26 AM
Post #22



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.


No, it was a response to my query about the renovations.

My point was that there was atrium like spacing similar to the lower floors that could be used to create the same conditions as CD - kick the legs out from underneath. Pure greenhorn conjecture but worth discussing.

I asked because the east penthouse collapse didn't occur due to Column 79. Nor any activity whether manmade or "heat" induced 35-40 floors below.

The columns running through the east penthouse had to be taken out judging by the video evidence, but at a higher level, no?
Go to the top of the page
 
+Quote Post
elreb
post Dec 29 2012, 08:24 PM
Post #22





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I like FEMA words.

The 5th, 6th and 7th floors contained the diaphragm floors, belt trusses and transfer girders.

Truss 1, Truss 2, Truss 3 and several cantilever transfer girders.

First off, I would want to soften column #80.

I think this may be your “Kink” area.

I also have a new word = cannibalize.

The steel is actually being eaten or dissolved alive and “not” by fire.

The cantilever transfer girders, spanned between the core and the north elevation at the 7th floor.

There were eight transfer girders to redirect the load of the building above the 7th floor into the columns that went through the Con Ed substation.

These girders cantilevered 6 feet 9 inches between the substation and the north facade of the building above.

The girders extended an additional 46 feet to the core.

The two transfer girders at the east end of the building were connected to Truss 1, creating a double transfer.

The girders varied in depth from 9 feet at the north end, to a tapered portion in the middle, and to 4 feet 6 inches at the southern section closest to the core. [We have the picture]

Each transfer girder weighed approximately 52 tons.

At the north wall, between the 7th and 5th floors, transferred columns were also part of the belt truss that circled the building as part of the lateral-load-resisting system and acted as a transfer for the columns above the shipping ramp.

The bottom cords of the transfer trusses were part of the support of the 5th floor slab and, as such, were located below the slab and above the ceiling of the 4th floor in a position exposed to fire from below.

The bottom cord members were massive members weighing slightly over 1,000 pounds per foot.

Such members are slow to heat up in a fire.


It was reported that these bottom cords were fireproofed.
Go to the top of the page
 
+Quote Post
elreb
post Dec 28 2012, 10:01 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 28 2012, 03:09 PM) *
Are there any details on the OEM diesel generator upgrades? Extra fireproofing?

Yes, I had proposed a timeline on another thread, yet there were no takers.

The Team has tons of files and reports

I’ll try to get data up soon.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 12:33 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 31 2012, 02:27 PM) *
Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?


I don't know what to call it. Maybe vibration from the penthouse hitting the 47th floor area. But I measured it--about one floor every 1/10th of a second. Too fast for gravity driven destruction.

I'm not taking credit for this. Somebody else called it a pulse. The sunlight thing was mentioned by others also.
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 03:12 PM
Post #23





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE (SanderO @ Jan 3 2013, 08:46 AM) *
Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.

Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Yes, I have a problem with the Task Force, when you've got Hauer and other 9/11 alum, who were the most likely perps and should be on trial if not in jail by now.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 07:03 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 09:35 AM) *
Thanks! To both.

OSS,

When I talk about weakening the trusses, I’m talking about the areas 5, 6, and below the 7 floor.

The construction pictures show connections and gussets several feet above floor 5.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 03:24 PM
Post #23



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 07:52 PM) *
Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here


thumbsup.gif

https://rubessteaks.com/media/catalog/produ...boneSteak_1.jpg
Go to the top of the page
 
+Quote Post
kawika
post Dec 28 2012, 10:18 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 26 2012, 11:09 PM) *
Are there any details on the OEM diesel generator upgrades? Extra fireproofing? Are there strategic points in the steel framing/core within the area of the diesel fuel tanks where this "fireproofing" may have been applied?

Could fireproofing with this exotic accelerant be applied at strategic points? Only to combust at a certain temperature? Or chemically ignited through the sprinkler system?

Did it need a kick-start because they f-ed up Plan A?

Those images are unreal.


I believe there were innumerable locations where a high-tech incendiary could be placed.

Take a look at the column. Both the inner and outer webs were vaporized. It appears that there was enough left over after the collapse to continue the erosion on this column while it was horizontal.

We must find out what did this.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 05:23 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 09:35 AM) *
The fall guy. Literally.

I still like the word = Patsy = who in effect, plays the scapegoat for a more elaborate crime.

I perceive a 2 phase destruction…weaken the trusses and kick the legs.

We have talked about Aluminum, Iron Oxide and Sulfur.

Another interesting metal is Magnesium.

When we were in the Boy Scouts, we would use it to start fires because it is flammable and burning at around 5,610 F.

It is also used in flares and fireworks.

Good stuff to get a chemical reaction going. Water actually causes it to burn better. [Ask the Germans]
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 11:50 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 2 2013, 03:09 PM) *
If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

Thanks
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 02:30 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 30 2012, 04:25 PM) *
Thanks Elreb....

I will study these.. are there drawings for the braced frame which appears to be over the sub station in the photos.

Mr K obviously was confused.


Mr. K was not confused.

The trusses bottom elements were at floor five. He shows the bottoms only.

There is way too much importance being placed on these friggin' trusses. They support a few upper columns. Fail all the trusses and you won't see the whole building drop like a stone.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:28 PM
Post #23



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 2 2013, 12:58 AM) *
I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?


The almost freefall collapse of the East Penthouse is another clue (to what, I don't know yet)

http://www.youtube.com/watch?v=JjQyXLRpULU



It just fell through the building as if all support was removed throughout its downward path in one go.

Sorry if I'm jumping ahead here, but how could this be achieved? Columns 79 and 80 ran through the penthouse.





Edit: Don't Columns 76, 77 and 78 run along the "kink" area?

This post has been edited by onesliceshort: Jan 1 2013, 08:31 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 03:10 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 4 2013, 07:03 AM) *
Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

The OEM bunker, the sole tenant of floor 23, was a vast facility with apparently one “main” room.

Certainly there were many small, secure rooms where a tiny band of conspirators could do their work unmolested.

—an armored, self-contained facility … complete with its own air, water and power supply…
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 06:21 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Jan 4 2013, 12:07 PM) *
Smoke before WTC1 collapsed indicates an isolated event within WTC7.

The building had smoke evacuation systems for the very purpose of keeping areas free from smoke. The mechanical systems were operational after WTC2 collapsed.

Kawika…I thing this may be bullhorn man with the cop who had a gun. [You tell me]

Although most people were evacuated from the building around the time the South Tower was hit, if not earlier (see (9:03 a.m.) September 11, 2001), after the South Tower collapses at 9:59 a.m. the security officer heads up to a floor in the 40s in WTC 7, reportedly to check that all his personnel have left.

He is initially accompanied by a police officer, but at around the 10th floor this officer has difficulty breathing, and so goes back down and exits the building.

When the North Tower collapses at 10:28 a.m., WTC 7 shakes and the stairwell goes dark.

The security officer, who has reached the 30th floor by this time, heads back down the stairs.

When he reaches the 23rd floor, where the headquarters of New York’s Office of Emergency Management (OEM) is located, he opens the door to check for any members of staff that might still be there, but finds the area filled with smoke.
Go to the top of the page
 
+Quote Post
kawika
post Jan 3 2013, 09:39 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 1 2013, 11:22 PM) *


Where was e "Hess landing" in relation to that two floor "mechanical space" gap? Where the two trusses intersect.


First two small rectangles left of the "Truss 1" arrow head, in the grey area. Which is also just east of column 73, shown nearby.

This post has been edited by kawika: Jan 3 2013, 09:59 PM
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 01:25 PM
Post #23





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Dec 30 2012, 03:17 AM) *
I'd have to read through this a few times but that's what I call meat on the bone!

The way I see it, 80, 77, and 74 are doing the work on Truss #2.

73 and 76 doing the work on Truss #1

What is 79 doing?

I would weaken truss #2 first, truss #1 second and truss #3 third

Have your kink and eat it too.



Go to the top of the page
 
+Quote Post
kawika
post Dec 28 2012, 04:21 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (elreb @ Dec 25 2012, 09:10 PM) *
First picture shows sulfur activity on the towers.

Second picture shows sulfur activity from 7WTC





Oh my! Fire did that? Fire in a smothering pile?

If I make a fire and then cover it with concrete dust, will the steel trapped underneath look like swiss cheese when I take it out?
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:29 PM
Post #23





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE (elreb @ Jan 3 2013, 04:49 PM) *
Patsy UA 93 missed its crossover with drone SB7; thus changing the plan.

That's why Bush Boy got stuck sucking his thumb in a 2nd grade classroom and all the other top government officials went off the map for 45 mins - 1 hr.

Every single one claims that when they heard about the first tower getting hit, they just continued doing whatever it was they were already doing.

QUOTE
Wolfowitz: We were having a meeting in my office. Someone said a plane had hit the World Trade Center. Then we turned on the television and we started seeing the shots of the second plane hitting, and this is the way I remember it. It’s a little fuzzy. There didn’t seem to be much to do about it immediately and we went on with whatever the meeting was. Then the whole building shook. I have to confess my first reaction was an earthquake. I didn’t put the two things together in my mind. Rumsfeld did instantly.

Paul Wolfowitz on 9/11


The WTC has just been attacked and the Sec of DEFENSE and the Asst Sec of DEFENSE didn't think it was worth bothering their pretty heads until after the Pentagon was attacked. NYC getting attacked was just another day at the office.

If everything happened by 9:00 AM like it was supposed to, all of these guys would be bragging about their heroic response to the attack, instead they had to pretend they were a bunch of clueless idiots.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 02:54 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 31 2012, 04:13 PM) *
One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...


Measure yourself on Achimspok's video analysis.

https://www.youtube.com/watch?v=JjQyXLRpULU

You can't see the entire face, so you have to guess about the lower end.
Go to the top of the page
 
+Quote Post
kawika
post Jan 4 2013, 01:41 PM
Post #23





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 2 2013, 03:03 PM) *
Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

Edit: the bunker had its own air supply so I can't see it having windows?


It had blast proof windows, but they don't open.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:57 AM
Post #23





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 3 2013, 08:28 AM) *
What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents


All engineered designs have redundancy... or reserve strength. For structural systems alternate load paths is another strategy often employed.... so some number of structural elements can be removed without compromising the structure's ability to perform.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:32 AM
Post #23



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 04:26 AM) *
I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]


Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 30 2012, 08:31 PM
Post #24



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Dec 31 2012, 12:03 AM) *
OSS,

When I talk about weakening the trusses, I’m talking about the areas 5, 6, and below the 7 floor.

The construction pictures show connections and gussets several feet above floor 5.


Is that truss 2 seen in this image of Floor 5 (it's labelled "northeast looking northwest")?

Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 04:22 PM
Post #24





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (DoYouEverWonder @ Jan 3 2013, 09:12 AM) *
Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Take a number…there is a long line in front of you…
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 11:58 AM
Post #24



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika @ Jan 4 2013, 02:39 AM) *
First two small rectangles left of the "Truss 1" arrow head, in the grey area. Which is also just east of column 73, shown nearby.


Possible corroboration from this guy, Richard Rotanz (though I'd take anything he says with a pinch of salt - source of "third plane" excuse to evacuate OEM - allegedly)

QUOTE
from inside the building at the 8th or 9th Floor elevator lobby, where two elevator cars were ejected from their shafts and landed in the hallway north of the elevator shaft


He put it down to North Tower debris. BS..



What time was this at? Who was with him?

There's also this anonymous guy who was allegedly making his way to the upper floors (escorted by a cop who couldn't make it because he couldn't breathe) and was supposedly rescued along with Jennings and Hess??

http://www.historycommons.org/context.jsp?...securityofficer

http://www.historycommons.org/context.jsp?...210threerescued

Weird shit.

Edit: the last guy was described as "security" and as working for the company on the upper floors - Silverstein/Salomon Barney. There was a lot of comings and goings in that building.

This post has been edited by onesliceshort: Jan 4 2013, 12:03 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 02:30 PM
Post #24





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Jan 4 2013, 07:41 AM) *
It had blast proof windows, but they don't open.

This points to mischief and or a chemical reaction going on in the area.

This goes back to the 1998 improvements.

No one ever mentioned a fire!
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 07:55 PM
Post #24





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (DoYouEverWonder @ Jan 3 2013, 03:12 PM) *
Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Yes, I have a problem with the Task Force, when you've got Hauer and other 9/11 alum, who were the most likely perps and should be on trial if not in jail by now.


I simply asked you what problem you had with the recommendations of the panel. I find that most of these blue ribbon panels are composed of the same types of people... Why would this be any different? You have to be a high achiever in their game to get appointed.

I am not an apologist for anyone or anything. Your manners and language leave a lot to be desired. And I don't get paid for anything I post online... or sell books, or CDs either.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:35 AM
Post #24





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 1 2013, 08:32 AM) *
Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.




No he doesn't claim that a man made event is impossible... never did. He (me) claims that it hasn't been demonstrated. What has been demonstrated is that the NIST explanation is not correct.

I don't recall use of the term *building design flaws*. But if I did use this I would have meant to say that it was the nature of the engineering design and decisions which enabled the tower to collapse as it did.

When engineers design redundancy into a structure... they do so with several strategies... provide for extra strength (high FOS).. and alternate load paths which can direct loads when parts of the structure (usually columns) fail. This is connected to adequate FOS... as loads will ALWAYS find a new path in a composite structure... whether or not the new found load paths can carry the additional loads.

I would argue that the designs of both the twin towers and 7 did not meet this standard. The engineers chose to perhaps increase the FOS... an amount which is yet to be conclusively determined. But they did not provide for alternate load paths and DID use trusses which are subject to catastrophic failure. This doesn't mean trusses can't perform. They do. But they have multiple failure points and can take the entire structure with it... like a bridge failure.

So by *design flaw* I mean that the 2 designs (twins and 7) had inherent design engineering features which would not arrest some failure modes... but enable them. The designs would promote runaway progressive cascading failures.

Do you agree?
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 08:53 PM
Post #24





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (DoYouEverWonder @ Jan 3 2013, 02:29 PM) *
That's why Bush Boy got stuck sucking his thumb in a 2nd grade classroom and all the other top government officials...a bunch of clueless idiots.

This is what I like about you.

You agree that there was an “OP” and not go off in left field trying to convince me that I do not know what a truss is.

Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:00 AM
Post #24





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE
Does anyone know what was under the East penthouse?


From what I remember that was one of the places they took floors out of, to put in a trading floor with tall ceilings.

QUOTE
Much of the new electrical, air-conditioning and mechanical equipment will serve three double-height trading floors. To create the extra height, workers are removing most of three existing floors, using jackhammers to demolish concrete slabs and torches to remove steel decking and girders beneath the concrete.

After the girders are cut into sections small enough to fit into a construction elevator they will be sold as scrap for about 4 cents a pound.

In some office buildings, that alteration would be impossible, but Silverstein Properties tried to second-guess the needs of potential tenants when it designed Seven World Trade Center as a speculative project.

''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need.

<snip>

MORE than 375 tons of steel - requiring 12 miles of welding - will be installed to reinforce floors for Salomon's extra equipment. Sections of the existing stone facade and steel bracing will be temporarily removed so that workers using a roof crane can hoist nine diesel generators onto the tower's fifth floor, where they will become the core of a back-up power station.

NYT


QUOTE
In November 1988, Salomon Brothers withdrew from plans to build a large new complex at Columbus Circle in Midtown and agreed to a 20-year lease for the top 19 floors of 7 World Trade Center.[25] The building was extensively renovated in 1989 to accommodate the needs of Salomon Brothers. This led to the alternative naming of the building as the Salomon Brothers building.[26] Most of three existing floors were removed as tenants continued to occupy other floors, and more than 350 tons (U.S.) of steel were added to construct three double-height trading floors. Nine diesel generators were installed on the 5th floor as part of a backup power station. "Essentially, Salomon is constructing a building within a building – and it's an occupied building, which complicates the situation," said a district manager of Silverstein Properties. The unusual task was possible, said Larry Silverstein, because it was designed to allow for "entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.

Wikipedia


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:19 AM
Go to the top of the page
 
+Quote Post
kawika
post Dec 30 2012, 08:55 PM
Post #25





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 28 2012, 10:31 PM) *
Is that truss 2 seen in this image of Floor 5 (it's labelled "northeast looking northwest")?



The girder (going left to right, south to north), top of photo, is the #2001 between col 79 and col 44.

The beams connecting to it are the K3004 and the C3004 facing east to west.

Col 79 is just out of frame on the left.

You can the see the rather unique arrangement for the floor decking running at odd angles right over the 2001 girder. This is the girder NIST says has no shear studs at such a critical junction of decking.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 09:16 PM
Post #25





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE
Is that truss 2 seen in this image of Floor 5...



I try to separate the trusses from the girders because I’m thinking vertical and not horizontal.

I may need to post more pictures.

At least we know it wasn’t about fires. Imagine 1000 pounds per foot?

In architecture a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints…


Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #41



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:16 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Don't worry about your spelling... we can read through typos.

This is a good find but not unexpected as the egress stairs were, I believe, on the east and west side of the cores were the trusses 1, 2 and 3 were located with 1&2 being on the east side.

Now we need to find out what was on "the other side" (core side) of those stairs... equipment and so forth.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 10:52 AM
Post #42





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The exterior distortion races from top to bottom. This tells me it is a pressure pulse in the exterior columns, not the penthouse dropping physically through all those floors.

If it went more than one floor you would see a lot of daylight through the north windows, but you don't. You see one floor of daylight.

If the floors failed from bottom up as we were told, the distortion would race up, not down. The floor edges had a double row of shear studs on the wind girders that were right behind the granite spandrels. Don't you think the granite would have been flying off under the stress of floors hinging downwards?

Here's a screenshot of the plan showing 38 shear studs on the north wind girders. Note that these are grouped much closer than the floor beams. 38 studs over ~23 feet as opposed to 24 studs over 44+ feet.

http://img221.imageshack.us/i/windgirdershearstuds.jpg

If the floors were failing inside, you would have seen evidence of this outside.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 11:15 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The drawing in your last post is NOT a truss... it is as diagonal braced frame. I am not sure you understand how a truss works... maybe you do, But not from your depiction in posting #47.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 08:48 AM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika)
We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.


That's what has been stumping me for days looking through the floorplans that we have.



The penthouse would have to fall through six columns for 45 floors (or 38 if we agree that the lower floors were kicked out).

And then of course the global failure



As elreb has said, the trusses and the lower 7-8 floors was only part of the op.

Judging by the visuals alone, the east penthouse looks to have been used as the "kicker" to take out the already weakened trusses/lower floors, but what brought the whole building down like a stone, as kawika says, is a mystery to me. Unless there were "unusual events" on the upper floors as well.

2cents
Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 12:08 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



What you showed is not a truss.. it's a diagonally braced frame. Ask an engineer. Do you have a section or shop drawing for this truss?

Diagonals do not a truss make.

Many buildings have diagonals and use triangulation to make them stiffer for wind shear. These are not trusses.

Learn about trusses:

https://en.wikipedia.org/wiki/Truss

diagonal braced frames:

http://www.steelconstruction.info/Braced_frames
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 11:11 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Interesting comment Kawika

The floors likely were not falling. I think your comment on the window distortion moving down suggests that the facade bulging was an event originating at the top. This may suggest that the entire frame above the transfer structures was intact with only a few column line hanging held by beams for some period and then the collapse occurred. Perhaps the mass of the east penthouse was large enough and it blasted air outward as it dropped.... displacing enough air in its path to bulge the windows???

These buildings has closed windows and it's conceivable that a large collapse of flooring somewhere would displace air. I don't know that it would be enough to created the buldge in the windows. I don't think this pulse of air would effect the frame itself. The curtain wall was not an especially robust attachment to the spandrels and was bolted to clip angles. Also I would think that the curtain wall was somewhat flexible... especially the glass which is bedded in silicone.

I am guessing the direction of movement of the bulge suggests a downward moving object creating the over pressure.
Go to the top of the page
 
+Quote Post
elreb
post Jan 6 2013, 10:48 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Well, my guess is working better and better.

A plane/drone should have hit the building but the crossover went bad.

The explosions and chemical burning could not be stopped.

Why were there police already in the lobby?

Why would EMO, CIA, SS, FBI, ATF and all the rest of the rats run from an event that had not occurred yet?

Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 01:48 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Virtually every high rise building in NYC has mech equipment on the top most floors and all have water tanks on the roof... often concealed behind structures or screens of some sort. Having worked on the 74th Floor of the Empire State Building with my office windows overlooking lower Manhattan I could see almost all the roof tops and can attest to this. Of course this makes perfect sense. Now there are all manner of communications antennas added to HVAC and building services up there.
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 10:51 PM
Post #42





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



The East Penthouse fell in, but the sunlight that shown through the windows was only one level, not the entire height. No exterior north columns were affected during this event.

If the three trusses were failed they would have compromised maybe 10 columns. Some of those would have been a few north face columns affected by the loss of the E&W end transfer girders.

We see 54 exterior columns!!!!!!!! failing simultaneously when the exterior drops. If we are talking trusses then we have to justify 54 losses, not 10.

Progressive failure is not simultaneous.

This post has been edited by kawika: Jan 1 2013, 10:52 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 01:31 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Oops, I ask the wrong question.

I meant to ask “What was in the East Penthouse?”

Apparently, mechanical stuff like air handlers.



Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 07:58 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 4 2013, 02:05 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Smoke inside a building space with non operable windows that are not broken (to allow smoke to enter) would be from a fire inside the space or from smoke finding its way in through air supply or return ducts... if all doors to the space were closed.

The other possibility is that part of the floor or ceiling was breached and smoked entered... more likely would be from below (floor) as smoke usually rises.
Go to the top of the page
 
+Quote Post
onesliceshort
post Dec 31 2012, 06:28 AM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Oh man...my bad doh1.gif

So would the splices shown be a logical area to attack?

Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 01:43 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Meat on the Bone…First time ever shown…better save a copy...

Actual construction prints…





Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:06 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



I give up.

As for the FEMA diagram, if the square section in the cartoon is meant to depict the entire ConEd area, then yes, something's wrong there. The eastern face of the ConEd concrete structure appears to run along beside column 79 and the shipping ramp

http://img593.imageshack.us/img593/2897/200719853.jpg

http://img196.imageshack.us/img196/9862/200719852.jpg

Edit: but the trusses and columns match with elreb's plans

http://www.rebrammer.com/images/colm80crop.gif



This post has been edited by onesliceshort: Jan 1 2013, 12:14 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 08:03 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS.

Correct.. these are the so called beam stubs and for columns called beam stub outlookers and used to connect beams to columns and in this case truss panels or diagonal struts to. All of these connections use 3/4"Ø bolts and gusset plates.

I have long claimed that these were the vulnerable part...where they were bolted. One side is welded in the factory. Welds are rated for strength just as bolts are. The important consideration may be the ultimate strength of the welds.

If you consider the that the strength of the steel beam or panel of a truss member is directly proportional to is criss sectional area you can see that connections represent a very different animal.

Let's suppose that the beam is a very heavy member carrying very large loads and is say 2" thick steel. How do you weld a connection which has the full 2" thick of steel? These are call full penetration welds. With thin material this is not especially challenging.. but I'd bet that getting a full pen weird with 2" plate is.

In fact some of the very thick plates welded to make up box sections.. columns showed these welds opened after the destruction.. they failed and parted. Architect Robert McCoy who is now on the board at AE911T told me that when the towers steel box columns were being fabricated many of these were rejected on inspection for the reason I noted.

You will also find testimony from several engineers,and I believe professor Corbet that there was concern about the performance of the connections. It seems that little was done to pursue this aspect of building performance.

I think you have correctly identified an area of concern and something I have been writing about since 2010.

Elreb,

You don't have to advise the readers what is valid and invalid. Readers are intelligent enough to sort out relevant information from spam. As I have written, any number of times, I am wrong as others are, and when it is pointed out to me I correct my statements. I believe the information about structure I provided are on topic and useful in understanding this complex problem.

As per your usual *style* you attacked me not the information I provided about trusses and braced frames... neither of which I wrote, but simply referenced.

Happy New Year
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 6 2013, 08:54 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Aaah, cheers lads!
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:50 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



So now magically Truss #3 is not a truss and the structural prints are a fraud!

Between column 61 and 62 it is called truss #3.

I have both “S” prints and “A” prints.

Why can not you stay on topic?

Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:41 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

You may be not understand how any building would and do collapse or fall and especially the examples of CDs. In them only a very few columns are destroyed. Once this happens there is no longer adequate load paths to support the structure...it then COLLAPSES and all the other columns are buckled.. or break apart at their connections.

Look at 7's destruction like this... it begins with one or two failures... which propagate to fail other parts of the structure... this is *using up* the reserve strength.. whatever it is.. As this process continues...(usually at an increasing failure rate) it reaches the point where the reserve strength has all been used up (destroyed columns / axial load paths).. and then rapid failure occurs of all remaining structures. This could mean... for example.. all the core structures are destroyed and only the perimeter columns are left to support the entire mass... if one more failure occurs all the other remaining columns are seeing loads in excess of their ultimate yield strength and fail in a new york moment... rapid onset of collapse. That is precisely how a *global* failure occurs.

As we don't see any evidence of perimeter column failures with the exception perhaps of the SW corner gash.. and that did not propagate visibly... corner are sort of the end of the line... the failures apparently were inside the structure NOT at the perimeter columns.

Also consider that the perimeter columns were all connected into a huge moment frame... with massive spandrel beams. These beams supported the facade side of the floors as well as providing bracing for the columns. The moment frame at the perimeter can be see as a massive vierendeel truss and would act almost as a single element.

The facade coming down as what appears to be a complete 4 sided unit indicates that the perimeter frames were largely intact, but what supported them was removed for at least 8 floors... and the most likely 8 floors were the ones from ground to floor 8.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 6 2013, 11:37 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



To add to the conundrum..

Barry Jennings

QUOTE
As I arrived there, police are all in the lobby. They, uh, showed me the way to the elevator.
We got up to the 23rd floor. We couldn't get in. We had to go back down. Then, Security and the
police took us to the down on the freight elevators. When they took us back up, we did get in.

...

When they finally got to us, and they took us down to what, what they, they, uh, called the lobby. 'cause I actually, when we got down there, I said: "Where are we?" He said: "This was the lobby." And I said: "You gotta be kidding me!" Total ruins. Totally destroyed.

...

And so they had to take me out through a hole in the wall. A makeshift hole that I believe the fire department made to get me out.



QUOTE
NIST Appendix L pg 18 [22 on pg counter] http://wtc.nist.gov/progress_report_june04/appendixl.pdf

pg 18

"No heavy debris was observed in the lobby area as the building was exited, primarily white dust coating and black wires hanging from ceiling areas were observed."

“debris damage across ¼ width of the south face, starting several stories above the atrium.”

“the atrium glass [ground to floor 5] was still intact"


huh.gif
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 02:33 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where are the bathrooms?

By the way...the fire cabinet and riser were mounted on column #79.



Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 02:52 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here
Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 11:26 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE
The “trusses” were designed to transfer the load from columns offset above into two columns below.
The actions we see in the videos require a whole bunch more than they had control over. Like every exterior column being ~simultaneously severed over eight floors.
Otherwise the building would have toppled over.

I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 12:07 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



There is good visual evidence that the east penthouse dropped through the entire height of the tower. Achimspok and or femr2 analyzed the reflection / distortion of the glass which appears to be a pressure pulse of some sort caused by the motion of the penthouse dropping. This could have been a small pull in of the floors as it dropped down.

There are enhanced videos which show this and it is quite convincing that the event traveled down through the tower. You can find these vids at the 911FF or at one of the aforementioned sites.

We certainly do need to have as much detailed information about the structure (plans, sections, details, specs, test logs,shop drawings, photos during construction) as well as data derived from the movements of the tower. Getting this has been like pulling teeth. It all should have been available to the public at one site.

I suspect that without actual images of the area in question just prior to collapse or the steel from the area post collapse for examination and testing... it will be impossible to reach a conclusion as much as a well thought through speculation. If all of the framing and loading data were available FEA could be run to simulate the collapse modes. But this, I suspect would take enormous computer power, and require many different *what if* inputs. However it should be possible to produce a model (gif simulation) which matches the actual observations unlike the NIST's simulation / offering.

Understanding will come from accurate observations, knowledge of the actual structure and technical knowledge of physics, engineering and materials science. Without this one can only have a cartoon conception of what happened.

I believe the initiation from whatever cause(s) was in the location on floor 5,6 & 7 east side where the transfer structures were located which I have been saying for a year.

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 08:13 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095





Now that's what I'm talking about. Visuals. First time I can visualize what Jennings was describing.

Medium rare, button mushrooms and onions... cheers.gif

Edit: there was also something I recall about the "computer room". I'll have to dig it out.

This post has been edited by onesliceshort: Jan 3 2013, 08:14 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 01:28 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Check this out.

5th floor stair #1 next to Truss #3 and stair #2 next to Truss #1 and #2.

Think about that and the Hess/Jennings explosion.

[I know...my spelling is off]



Go to the top of the page
 
+Quote Post
elreb
post Dec 31 2012, 01:20 AM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Attention…all readers

Do to the simple fact that “SanderO” refuses to stay on topic and has a mission to waste P4T space with useless and worthless text…

I will no longer respond to any of his wandering false, inaccurate, incorrect, inexact, and invalid, off beat, unsound, untruthful, unproven and wrong blathering.

I recommend that all serious researchers to ignore him.

I am very close to solving the destruction of 7WTC and do not need distractions.
Go to the top of the page
 
+Quote Post
elreb
post Jan 5 2013, 12:21 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Didn’t Jennings say something about a hole in the wall made by the fire department?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 10:51 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

We would have to see the plans of the alteration. My guess, without seeing them is that these were long span column free office floors with a few exceptions such as 79, 80 and 81. Two story spaces could be created for trading rooms without removing any columns or leaving them in place in the middle of the two story spaces.

If the east penthouse did collapse through the entire visible portion or the north facade we have to conclude that the axial supports were no longer there... as far down as we can see.

If the penthouse represented an exceptionally large load... more so than the same for each of the floors below its footprint... it could be the driver of the pressure pulse. Just a guess here. And the drop could be from failures of the structure in the region below it from floors 1-8.
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 09:19 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



The 23rd floor was on a self-contained …conditioned Air system designed to remove smoke…

We see activity on level 23 and on level 5/6…

The connections to most major columns were 2 feet above the floor on the 5th floor.

Upgrades were between 1998 and 1999…dah…

It was all planned… [Man-made]

PSS: Did anyone run away from the phone building next door?

Why on god’s earth would the CIA and the SS believe that they were a target?

They live in a “Bunker”; yet they run away like rabbits! [Nothing odd here]

Most were told to not come to work. {Yes we have evidence]

Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 02:25 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Thanks Elreb....

I will study these.. Are there drawings for the braced frame which appears to be over the sub station in the photos

I think this area is of interest.,

Mr K obviously was confused. He tried.. and made a mistake or two... we all do.
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 04:43 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Where is the weight on this blueprint?

Not over 79 or 80…

Does anyone know what was under the East penthouse?

The original roof prints show roof drains.

My drawings show satellite dishes and communication.

OSS

The bunker was also a good place for mischief. Good reason to have a lock down.

Kawika

Many Thanks to the “Team”!

I have an unfair advantage to a lot of unpublished data.


Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 01:42 PM
Post #42





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Nice find. Worth exploring further.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 10:44 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Are you suggesting that the East Penthouse mass drove down because the trusses and structure below failed? Obviously if the structure supporting a mass above is removed... gravity will drive the unsupported structures downward.
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 06:28 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I’ll bet very few people knew that the Jennings stairs #2 were on the same level where the engineers had their office and shop. [Stairs #1]

May be unrelated, yet interesting.


Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 04:18 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Hess/Jennings explosion...

QUOTE
There was nothing under the 6th floor landing. This tends to support a truss event that was witnessed by Jennings. Or it could be just taking the stairs out of service.


I agree as long as it was part of the op. There were no Transformers close to this area.

I still like the fire hose located on #79.



Go to the top of the page
 
+Quote Post
elreb
post Jan 1 2013, 10:57 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617




Happy New year
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 08:28 AM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Thanks DYEW.

QUOTE
''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need......entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.



What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents

This post has been edited by onesliceshort: Jan 3 2013, 08:29 AM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 09:09 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Does anyone know what was under the East penthouse?


I think that this area should be dug into.

Weren't there three double height trading floors on the upper levels?

Edit: thanks guys for the extra plans - much appreciated. If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

This post has been edited by onesliceshort: Jan 2 2013, 09:10 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 12:30 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The architectural plan calls out a truss which runs between column 78 and 76. Column 79 and 80 in the photo appear to be adjacent to Con Ed.

The FEMA diagram appears to be mis-labeled and the photos are as well. It's hard to make any sense from these 4 depictions which are intended to be of the same structure.

Who added to column numbers on the photos?

What's the deal with the space frame over Con Ed? Why does FEMA leave this out? It seems to be this was also a long span structure very much like a truss bridge over Con Ed.

The girder labeled truss 2 is spanning over Con Ed not east of it... in the lower photo. Perhaps the structure was not suspended from that girder labeled truss 2 which would be the bottom chord of a truss.. yet to be constructed.

I wouldn't give up... but this is getting curiouser and curiouser.

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 09:00 AM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Some 3 dimensional (partial) images of trusses 1 and 2





Any use?
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 12:56 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



"Mr Koenig" at FEMR's site labelled them. I can't vouch for them but the guy seems to know his stuff.

Mr Koenig's collection of structural photos only reach Floor 5 (slab). There must be photos out there of Floors 5 to 8 being withheld. I mean, if those photos were taken out of structural engineering interest, why would the photographer stop at the most interesting section of the build?
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 02:31 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Just for general knowledge:

The north east corner of floor #3 had stairs #3 and #4, plus a HC elevator that went to the 2nd floor.

The second floor had an auditorium and a stage.
Go to the top of the page
 
+Quote Post
elreb
post Dec 30 2012, 11:03 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



As expected, you are missing the point…

And again…we are only talking about building 7 and its 3 trusses.

Please look at the title of the thread!

Why is it hard to stay on topic?

All three trusses have triangles.

Here is truss 3…see any 90's?

Note: The Vierendeel truss is a structure where the members are not triangulated but form rectangular openings… As such, it does not fit the strict definition of a truss; regular trusses comprise members that are commonly assumed to have pinned joints, with the implication that no moments exist at the jointed ends.

Go to the top of the page
 
+Quote Post
SanderO
post Dec 31 2012, 09:30 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Some information about welds:

http://www.weldingtipsandtricks.com/full-p...ation-weld.html

And welding failures:

http://www.welding-advisers.com/Welding-failures.html
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 10:26 AM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.


No, it was a response to my query about the renovations.

My point was that there was atrium like spacing similar to the lower floors that could be used to create the same conditions as CD - kick the legs out from underneath. Pure greenhorn conjecture but worth discussing.

I asked because the east penthouse collapse didn't occur due to Column 79. Nor any activity whether manmade or "heat" induced 35-40 floors below.

The columns running through the east penthouse had to be taken out judging by the video evidence, but at a higher level, no?
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 12:38 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Bunker is filled with smoke…

The security officer, who has reached the 30th floor by this time, heads back down the stairs.

When he reaches the 23rd floor, where the headquarters of New York’s Office of Emergency Management (OEM) is located, he opens the door to check for any members of staff that might still be there, but finds the area filled with smoke.

What caused the smoke? Did the bunker even have windows?
Go to the top of the page
 
+Quote Post
SanderO
post Jan 2 2013, 02:13 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 09:34 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



The transfer trusses and girders were connecting all the column lines you mention. If one of the elements under the penthouse... including T truss 1 (if we are to believe the plans) ... fails... the failure propagates to adjacent structures... especially transfer structures.

The East West Truss 1 was bearing on a north south transfer girder (see the lower right built up girder in the elevation of Truss 1... it in turn was supported on 2 columns (apparently)

Note in the confusing FEMA cartoon that T1 and t2 were both below the penthouse. The drop of the penthouse indicated that those two trusses failed... or the columns supporting at their west or east side. T1's east side was supported by another transfer girder bearing on 2 columns.

The take away (for me) is that once some part of this (Rube Goldberg) system of load transfer structures failed it would propagate through the structure. The plunge of the east penthouse is the tell tale sign that those structures failed.. BEFORE the rest of the tower drops.

The kink IS on/through the column line just next to Con Ed on the east which is also the line where T1 and t2 are supported on their west side.

The observed movements were:

swaying east-west for about 6 seconds
east penthouse collapses
west penthouse collapses
entire tower drops

I would add in some guesses:

single axial load path failure (transfer girder at east end of T1??)... (cause indeterminate)
swaying east-west for about 6 seconds
T1 and T2 buckle or fail (cause indeterminate)
east penthouse collapses
columns on north side of con ed fail.. south side... these support the 8 cantilever girders and the columns inside the north facade
T 3 buckles or fails (cause indeterminate) (at west side of 8 cantilever girders )
west penthouse collapses
parts of the space frames on the north side of the east and west wall fail/buckle fold onto the footprint
The entire tower no longer has any axial load paths from floor 8 to the foundations.
drops for 104' with sections of the floor still attached to the perimeter columns
entire tower drops
Go to the top of the page
 
+Quote Post
kawika
post Jan 4 2013, 06:07 PM
Post #42





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Smoke before WTC1 collapsed indicates an isolated event within WTC7.

The building had smoke evacuation systems for the very purpose of keeping areas free from smoke. The mechanical systems were operational after WTC2 collapsed.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 6 2013, 02:59 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
QUOTE
"NCSTAR 1A pg 52
The absence of diesel fuel fires on Floor 5 was consistent with the information from interviews that sometime after 1:00 p.m., OEM and FDNY staff climbed the east stairway of WTC 7 and did not see much damage on Floors 4, 5, or 6 from their viewing location. They made no mention of fire, heat or smoke."


"did not see much damage on Floors 4, 5, or 6 from their viewing location"

Very cute play on words.

These people couldn't get any further than Floor 6 (or below) on the east stairway either at 1pm?
People trapped on floors 7 and 8.
Floor 6 landing gone.
Elevators blown out of their shafts on Floor 8 or 9 (north side)

These people need to be named and interviewed. Why all of the secrecy and ambiguity?

Elreb, do you have a source for the "hole in the wall made by the Fire Department"?

And yes, that's weird shit about your site mate.

This post has been edited by onesliceshort: Jan 6 2013, 03:00 PM
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 10:17 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Elreb,

Not all trusses have diagonals or triangulation... the triangle is used because it doesn't deform.

The twin towers used Vierendeel trusses which have no diagonals... they relie on very stiff 90° joints.

A truss is really a beam which has most of the web removed and gets its strength by having the tension member and the compressive member separated... the web is reduced to the diagonal (triangular) chords which links them together in a beam action... tension on bottom and compression on top.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 09:38 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
QUOTE (kawika @ Jan 4 2013, 02:39 AM) *
First two small rectangles left of the "Truss 1" arrow head, in the grey area. Which is also just east of column 73, shown nearby.


Possible corroboration from this guy, Richard Rotanz (though I'd take anything he says with a pinch of salt - source of "third plane" excuse to evacuate OEM - allegedly)

QUOTE
from inside the building at the 8th or 9th Floor elevator lobby, where two elevator cars were ejected from their shafts and landed in the hallway north of the elevator shaft


He put it down to North Tower debris. BS..



What time was this at? Who was with him?







Corroboration of an explosion between columns 67-69 or 70-72 and below the stairway at column 73?

The core was attacked on the lower floors. Proof.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 6 2013, 10:14 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



Here's a transcript (have to check it though) of Barry Jennings interview — handy to have


Source:

http://portland.indymedia.org/en/2009/04/390576.shtml

QUOTE
1


Barry Jennings' Statements on WTC 7

Uncut Version

Transcribed 4/9/09 From

Jennings, Barry, "Video Response to Michael Hess," YouTube,

http://www.youtube.com/watch?v=VQY-ksiuwKU...feature=related

BARRY JENNINGS:Hi. My name is Barry Jennings. Ahm. I'm 52 years old. Um, I've worked for 32 years in one location in the Office of Emergency Management inactivation [sic]. Basically, that's it. I'm married. Father of 4.

I was called shortly after the first plane hit. I got there, uh, I had to be inside on the 23rd
floor when the second plane hit.

Uh, man the Office of Emergency Management at the World Trade Center 7. On the 23rd floor. As I arrived there, police are all in the lobby. They, uh, showed me the way to the elevator.
We got up to the 23rd floor. Me and Mr. Hess who I didn't know was mr. Hess at the time. We couldn't get in. We had to go back down. Then, Security and the police took us to the down on thefreight elevators. When they took us back up, we did get in.

As I told you earlier...

INTERVIEWER: Yes.

Upon arriving into the OEM EOC, we noticed that everybody was gone. I saw coffee thatwas on the desk. Still smoking. Smoke was still coming up from the coffee. I saw half-eaten sandwiches. And only me and Mr. Hess was up there. Uh, after I called several individuals, one individual told me that to "leave! Uh, and to leave right away."

Then, Hess came running back in. He said: "We gotta get outta of here!"

He found a stairwell. So we we subsequently went to the stairwell. And we were goingdownstairs. When we reached the eighth, uh, the sixth floor, the landing that we were standingon, gave way. There was an explosion. And the landing gave way.
And when, I was left there hanging. I had to climb back up. And I had to walk back up the eighth floor.
When I made it to the sixth floor [sic], and, and there was an explosion. That's what forced us back to the eighth floor. Both buildings were still standing because I looked two, one way and looked the other way and there's nothing there.

The explosion was, believe me—keep in mind now it's pitch black in there. All the lights went out. So when the explosion happened, it blew us back.

After getting to the eighth floor everything fell.

I'm thinking I'm standing on, on, on the landing and actually holding on the pole aboveus. And I had to climb back up because Hess is yelling: "Whadda we do now?" I said: "There'sonly one thing to do now and and it's climb back up." Hoping the buildings were still standing.

Keep in mind, the fire department came and ran. They came twice! Why? Because Building Tower 1 fell. Then, Tower 2 fell. And then when they came back, they came back with all concern to get me the hell outta there. I was trapped in there for several hours. I was trapped in there when both buildings came down.

All the time, I'm hearing all kinds of explosions. [QUIETLY] All the time, I'm hearing explosions. I'm thinking it's ..

When they finally got to us, and they took us down to what, what they, they, uh, called the lobby. 'cause I actually, when we got down there, I said: "Where are we?" He said: "This was the lobby." And I said: "You gotta be kidding me!" Total ruins. Totally destroyed. It looked like...


2


..King Kong had came through and stepped on it.. Now keep in mind when I came in here, the lobby had nice escalators. It's a huge lobby. And for me to see what I saw, it's unbelievable.

And the firefighter that took us down, kept saying, "Do not look down!"
And I kept saying, " Why not look down?" And we were stepping over people.
And you know you can feel when you're stepping on people.

And I was so destroyed, I didn't know where I was.

And so they had to take me out through a hole in the wall. A makeshift hole that I believe the fire department made to get me out.

This big, giant police officer came to me. And he says, "You have to run!" I said: "I can't run. My knees are swollen." He said: "Then, you'll have to get on your knees and crawl. Because we have reports of more explosions." And that's when I started crawling. And I saw this guy fall behind me. His comrade came, and they dragged him to safety.

INTERVIEWER: IRS was there?

BARRY JENNINGS: Well, I'm just confused about one thing. And one thing only: Why World Trade Center 7 went down in the first place. I'm very confused about that. I know what I heard. Iheard explosions. The, the, uh, explanation I got was: It was, uh, the fuel-oil tanks. I'm an old boiler guy. If it was the fuel-oil tank, **it would have been wiped out of the building

Yes, you can use this footage.

Transcribed 4/5/09 From Canton Truth.com on the URL:

http://cantontruth.blogspot.com/2008/06/bo...y-jennings.html

[This is off a YouTube from Infowars.com and expands what was a censored first interviewfrom (Loose Change:The First Cut, I believe) because the "stepping over people" part of it was cut, but is on this version. But this version also omits things that are in the second version ofJennings' statement. Note that he gets rattled when he is recalling the sequence of events, especially in the stairwell. He goes back to explain that scene to clarify what happened. He also says he was in that building for "several hours," not the 1.5 in the records. If that's true, the perpetrators had to be running around, setting fires, etc. And considering that the firefighters were all evacuated either by 9:03, according to one account, or noon, according to another, how do we know they were NYFD/NYPD personnel. It's almost impossible to believe that they would let the perpetrators run around setting those fires, as they had to be doing. ]

JASON BERMAS: Hello, everybody out there. I'm Jason Bermas and, uh, I'm about to release an
Infowars and Loose Change.911.com exclusive. Uh, last year, Dylan Avery and myself went togreat lengths to get an interview with Barry Jennings. Uh, this man was a emergency worker. Uh,
head of a department out in New York City. And, uh, on 9/11 he was called up after the firstplane strike, and he went World Trade Center Building 7.

Now, when he went there, he went up with a police triage and Michael Hess.

Now, Michael Hess was the city corporation counsel. And, uh, when they got up to the Office of Emergency Management—because that's where they were supposed to go in case of anykind of a terrorist attack or a natural disaster—the Office of Emergency Management was...


3
...abandoned. And Barry said that he saw, y'know, still hot coffee, half-eaten sandwiches. Didn't know what was going on.

When Michael Hess and Barry actually went to exit, they had to take the stairwell. And while they were down by the eighth floor—uh, between sixth and eighth floor—they had an explosion from underneath them. Were trapped up for the rest of the afternoon. And this was all prior to either of the towers collapsing.

Now, Michael Hess and Barry Jennings went on a local news that day and confirmed thestory. And we're going to play the whole thing now.

Why, why are we choosing now? In the beginning when we got this interview, we were going to put it in the Loose Change: Final Cut. We were then contacted by Barry after some of it had been played. And it started to make its rounds on the Internet. And he was upset and he didn't want any, uh, the movie, because he was getting phone calls and threats. And he didn't want to lose his job. And people essentially were angry with him. He didn't want all this attention.

Now, he's given an interview to the BBC. And on July 6 [2003], they are going to present Conspiracy Files: The Third Tower. Uh, if you look at the last piece they did, The 9/11 Conspiracy Files, they tried to say ludicrous things like the debris field of Shanksville, Pennsylvania was only one mile away at Indian Lake when we had reports that there was debris eight miles away over a mountain ridge in New Baltimore. But they didn't mention that. We figured that this, uh, this new show comes out July 6th. And we want Barry Jennings', uh, words of a year ago to speak for themselves. So previewing, uh, my new film, Fabled Enemies—because this will be in Fabled Enemies— we are going to release some [sic] of the Barry Jennings interview.

BARRY JENNINGS: My name is Barry Jennings. I'm 52 years old. Um, I've worked for for 32 years in one location in the Office of Emergency Management inactivation [sic]. They they always included our locale and what we did, what they did was, they actually coordinated the emergency management in several agencies.

I was called shortly after the first plane hit. I got there, uh, I had to be inside on the 23rd floor when the second plane hit.

Upon arriving into the OEM EOC, we noticed that everybody was gone. I saw coffee thatwas on the desk. Still smoking. Smoke was still coming up from the coffee. I saw half-eaten sandwiches. And only me and Mr. Hess was up there. Uh, after I called several individuals, one individual told me to "leave! Uh, and to leave right away."

Mr. Hess came running back in and said: "We gotta get outta here." He found a stairwell.
So we subsequently went to the stairwell. And we were going downstairs. When we reached the eighth, uh, the sixth floor, the landing that we were standing on, gave way. There was an explosion. And the landing gave way.

And when, I was left there hanging. I had to climb back up. And I had to walk back up the eighth floor. When I made it to the sixth floor [sic], and, and there was an explosion. The explosion was, believe me—keep in mind now it's pitch black in there. All the lights went out. So when the explosion happened, it blew us back..

I'm thinking I'm standing on, on, on the landing and actually holding on the pole above us. And I had to climb back up because Hess is yelling: "Whadda we do now?" I said: "There's only one thing to do now and and it's climb back up." Hoping the buildings were still standing.

Keep in mind, the fire department came and ran. They came twice! Why? Because Building Tower 1 fell. Then, Tower 2 fell. And then when they came back, they came back with all concern to get me the hell outta there. I was trapped in there for several hours. I was trapped in there when both buildings came down.

All the time, I'm hearing all kinds of explosions. [QUIETLY] All the time, I'm hearing explosions.


4

When they finally got to us, and they took us down to what, what they, they, uh, called the lobby. 'cause I actually, when we got down there, I said: "Where are we?" He said: "This was the lobby." And I said: "You gotta be kidding me!" It's total ruins. Totally. Now keep in mind when I came in here, the lobby had nice escalators. It's a huge lobby. And for me to see what I saw, it's unbelievable.

And the firefighter that took us down, kept saying, "Do not look down!"
And I kept saying, " Why not look down?" And we were stepping over people.
And you know you can feel when you're stepping over people.

This big, giant police officer came to me. And he says, "You have to run!" I said: "I can't run. My knees are swollen." He said: "Then, you'll have to get on your knees and crawl. Because we have reports of more explosions." And that's when I started crawling. And I saw this guy fall behind me. His comrade came, and they dragged him to safety.

I'm just confused about one thing. And one thing only. Why the World Trade Center 7 went down in the first place. I'm very confused about that. I know what I heard. I heard explosions. They they, uh, the explanation I got was: It was, uh, the fuel-oil tanks. I'm an old boiler guy. If it was a fuel-oil tank,** it would have been wiped out of the building.

Yes, you can use this footage.

JASON BERMAS: So there you have it, Folks. Explosions within World Trade Center Building 7 prior to the collapse of either world trade center tower. Explosions after the fact. The lobby completely decimated. And that's a big point because we're gonna to show you video inside the Millennium Hilton. And show you that, uh, there was slight damage the next day. It was nothing compared to what happened in Building 7. Why? Well, it's probably from those explosions that were in the building. So again, this will be in my new film Fabled Enemies. And, uh, you can checkthat out. It's, uh, going to be released by September first, we're looking at right now. Thanks for joining us, Infowars.com and Prisonplanet.com.

Statement No. 2

Transcribed 4/5/09 From MySpace.com. The URL is

http://vids.myspace.com/index.cfm?fuseacti...ideoid=20643060

[This version of Jennings' statement is off a myspace.com website. It also granted Jennings anonymity because the Title is "Interview With WTC 7 Survivor." Compare this statement's presentation with that of Bermas by putting the scripts side by side. In this one, the "stepping over people" part of it was cut. But in the YouTube footage used by Jason Bermas/Avery, they cut out the "King Kong" portion. But Bermas/Avery also cut out the arrival part, where Jennings/Hess are taken up on a freight elevator, can't get in, then are taken down and back up again. Neither does it contain the "giant" cop who said there were reports of explosions and forced him to crawl. But it does include the hole in the wall by which Jennings emerged on to the street. You'll notice in the first video that Jennings' focus is totally on himself and Hess is a minor, frightened character. Which explains why he believes was made just for him by the firefighters. I'm wondering what about the chap he said who fell behind him and whose comrade hauled him to safety. Or what about Hess????? Jennings also says "makeshift," please note. My guess is that the hole was made by those basement explosions in WTC 7. ]

BARRY JENNINGS: We went down to the eighth floor. Big explosion. Blew us back to the eighth floor.

Uh, man the Office of Emergency Management at the World Trade Center 7. On the 23rd
floor. As I arrived there, police are all in the lobby. They, uh, showed me the way to the elevator.
We got up to the 23rd floor. We couldn't get in. We had to go back down. Then, Security and the..


5
...police took us to the down on the freight elevators. When they took us back up, we did get in.
They took us back up. We did get in.



On arriving, in, into the OEC, we noticed that everybody was gone. I saw coffee that was on the desk. Still, smoke, smoke was still coming off the coffee. I saw half-eaten sandwiches. And I called several individuals. One individual told that, uh, to leave and leave right away. Then, Hess came running back in. He said: "We gotta get out of here!" He found a stairwell. So we subsequently found the stairwell and we're going downstairs. When we reached the eighth, uh, the sixth floor, the landing that we were standing on gave way. There was an explosion and the landing gave way. I was left there hanging, and I had to walk back up to the eighth floor. As I told you earlier...

INTERVIEWER: Yes.

BARRY JENNINGS: Both buildings were still standing because I looked two, one way and looked the other way and there's nothing there.

When I got to the sixth floor, there was an explosion. That's what forced us back to the eighth floor. Both buildings were still standing. After getting to the eighth floor everything fell.

INTERVIEWER: IRS was there?

BARRY JENNINGS: Well, I'm just confused about one thing. And one thing only: Why World Trade Center 7 went down in the first place. I'm very confused about that. I know what I heard. I heard explosions. The, the, uh, explanation I got was: It was, uh, the fuel-oil tank. I'm an old boiler guy. If it was the fuel-oil tank,** it would have been wiped out of the building.

When I got to that lobby, the lobby was totally destroyed. It looked like King Kong had came through and stepped on it. And I was so destroyed, I didn't know where I was. And so they had to take me out through a hole in the wall. A makeshift hole that I believe the fire department made to get me out.

As I told you before, they always included our locale and what we did, what they did was, they actually
coordinated the emergency management in several agencies.


2d part, day of 9/11 "Barry Jennings Uncut"
"Barry Jennings—9/11 Early Afternoon ABC7 Interview,

http://www.youtube.com/watch?v=5LO5V2CJpzI...feature=related

Barry Jennings: Dead Bodies? youtube

http://www.youtube.com/watch?v=nyKtNHPeKxg...feature=related

I kept saying why not look down and I'm stepping over people. And you know when you're stepping over people.


6



**Edit: should read "if it were the tanks it would have been one side of the building."

Not "wiped out the building"


This post has been edited by onesliceshort: Jan 6 2013, 11:19 PM
Go to the top of the page
 
+Quote Post
elreb
post Jan 5 2013, 05:00 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



My website magically went off line.

I'm looking into the problem.

Maybe we are getting too warm?

We will need to edit my pictures using http://www.jfbrammer.com/x2.htm

just change the "re" to "jf"...

Until we do we will keep getting the log on message.
Go to the top of the page
 
+Quote Post
SanderO
post Dec 30 2012, 08:33 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



No I don't think so... those are the standard/regular beams framed into a girder... probably near one of the corners.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 2 2013, 12:27 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Interesting comment Kawika


Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 6 2013, 09:55 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095




Guess who was the source of the "third plane" story. And who was allegedly present when the tower collapse "prediction" was made. And who was allegedly responsible for evacuating OEM for both reasons. The first directly, the second indirectly.

Rotanz.

QUOTE
http://www.historycommons.org/entity.jsp?e...=richard_rotanz

Emergency responders in the lobby of the north WTC tower hear an unconfirmed report of a third plane heading toward New York. Consequently, Assistant Fire Chief Joseph Callan orders all firefighters to evacuate the tower. The third plane report is soon found to be incorrect. One firefighter tells a colleague over radio, “That plane is ours, I repeat, it is ours.” Rescue operations therefore continue. [NEW YORK TIMES, 7/7/2002; NEW YORK CITY FIRE DEPARTMENT, 8/19/2002, PP. 32; FIRE ENGINEERING, 9/2002; ASSOCIATED PRESS, 11/16/2002] The source of the incorrect report is apparently Richard Rotanz, the deputy director of the New York Office of Emergency Management (OEM), who is reportedly in the OEM command center on the 23rd floor of WTC Building 7. A Secret Service agent in WTC 7 reportedly told him there were unconfirmed reports of other planes in the air. When OEM Director Richard Sheirer called Rotanz some time after the second WTC tower was hit, Rotanz relayed this information, telling him there were “still planes unaccounted for that may [be] heading for New York.” Sheirer then told people in the North Tower lobby “that another plane was on the way.”


the lobby of Building 7 of the WTC, EMS Division Chief John Peruggia is in discussion with Fire Department Captain Richard Rotanz and a representative from the Department of Buildings. As Peruggia later describes, “It was brought to my attention, it was believed that the structural damage that was suffered to the [Twin] Towers was quite significant and they were very confident that the building’s stability was compromised and they felt that the North Tower was in danger of a near imminent collapse.” Peruggia grabs EMT Richard Zarrillo and tells him to pass on the message “that the buildings have been compromised, we need to evacuate, they’re going to collapse.” Zarrillo heads out to the fire command post, situated in front of 3 World Financial, the American Express Building, where he relays this message to several senior firefighters. He says, “OEM says the buildings are going to collapse; we need to get out.” (OEM is the Mayor’s Office of Emergency Management, which has its headquarters in WTC 7.) Fire Chief Pete Ganci’s response is, “who the f___ told you that?” Seconds later, they hear the noise of the South Tower as it collapses. [CITY OF NEW YORK, 10/23/2001; CITY OF NEW YORK, 10/25/2001; CITY OF NEW YORK, 10/25/2001; CITY OF NEW YORK, 11/9/2001]


I swear to God man, I'd love to put all of these people in one room, face to face and tell them to tell their stories down a camera lens. Live.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:22 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



OSS,

I don't consider anyone an idiot. I have found most of those interested in 9/11 to be intellectually curious and intelligent. I have also found that many are not very good observers (not trained or experienced) and most have little to no technical knowledge of physics, statics, engineering and so forth. When most people confront complexity in their lives they need to have cartoon like understanding and have a working user interface. I consider myself only slightly advantaged with respect to the WTC destruction as I have been an architect since I graduated from college. I am not an engineer, though I was taught basic engineering, and use it in my work... I am not a physicist, though I did take classes in this and chemistry half a century ago. I have acquired other skills related to my vocations and non professional interests. All of these inform how I understand the world. I am certainly not an expert... and never claimed to be.

Enough said on that.

These photos are interesting. I believe I've seen them. But I am a bit confused as well (something normal with me). In the ,lower image it appears that the Con Ed facility reaches right up to Vesey Street and is further south than the braced frame compared with the FEMA cartoon. Also it the number of columns adjacent to Con Ed on the east is different in the cartoon and the image. And the top image Con Ed appears to be at least one column bay to the north (sort of where I thought it was). And then I don't see the trusses 1&2 either.

In the top image I do see what appears to be a 3 dimensional space frames over the sub station which are labeled 3,4 & 5 (flrs levels). But the sub station appears (mostly hidden) and well to the north of Vesey St. Whatever that 3 D structure is called it doesn't seem to be depicted on any of the FEMA cartoons... and what is labeled at truss 2 appears to be at the East wall.

I cannot dispute that these are photos taken during construction. But I can't make sense of them and relate them to the FEMA cartoons. And frankly I can't even figure out the levels or the column #s. Could this possibly be a reversed of composite or fiddled with image?

Am I the only person confused by this? I see some resemblance to parts of the FEMA cartoon, but more that looks nothing like it.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 03:16 PM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



After seeing these photos (again) it reinforces my belief that there was a runaway failure in the transfer trusses and other load transfer girders. But I see that there was an extensive braced frame 3D lattice which also seems to appear to span over Con Ed. That too is suspicious.

Finally seeing the numerous splices which were used to field-erect these heavy panels into trusses I find many opportunities and vulnerabilities. I don't know whether or not these details were available to the ASCE back in the period just after the event, but it seems to me that this clearly should have received lots of scrutiny. Apparently all the steel from 7 is gone. If true, that would leave the analysis to theoretical modelling.

Why hasn't AE911T seen this?
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:45 AM
Post #42





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



A bit off topic, but the irony is just too much for me. This is like letting the foxes guard the chicken coop. Other members of this task force were also at the WTC on 9/11.


QUOTE
REPORT OF THE NEW YORK CITY NEW YORK STATE TASK FORCE ON BUILDING AND FIRE SAFETY

Task Force Members

Jerome M. Hauer, Commissioner, Co-Chair
New York State Division of Homeland Security and Emergency Services

NYC/NYS Task Force Report


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:46 AM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 01:03 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Did the bunker even have windows?


Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

Edit: the bunker had its own air supply so I can't see it having windows?

This post has been edited by onesliceshort: Jan 4 2013, 01:08 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 3 2013, 09:22 PM
Post #42



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095





Where was e "Hess landing" in relation to that two floor "mechanical space" gap? Where the two trusses intersect.
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:46 AM
Post #42





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 05:49 PM
Post #42





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Back to my original guess.

Patsy UA 93 was to leave around 08:01 but was delayed until 08:42.

Newark International Airport is about 9 miles from 7WTC.

Patsy AA 11 took off around 07:59 and its drone made it to WTC by 08:46. [Logan is 190 miles from WTC]

The “Bunker” was locked around 9:03 even though they had stinger missiles and radar on the roof.

If they believed that a 3rd plane was on its way, why did they not call for several AH-64 Apaches?

Patsy UA 93 missed its crossover with drone SB7; thus changing the plan.

The Hess/Jennings explosion may have been time for the intended strike; however it became a wave off.

If 7WTC were prepped in 1998, then it would have to have a plan to justify the destruction!
Go to the top of the page
 
+Quote Post
kawika
post Jan 3 2013, 09:39 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 1 2013, 11:22 PM) *


Where was e "Hess landing" in relation to that two floor "mechanical space" gap? Where the two trusses intersect.


First two small rectangles left of the "Truss 1" arrow head, in the grey area. Which is also just east of column 73, shown nearby.

This post has been edited by kawika: Jan 3 2013, 09:59 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:32 AM
Post #43



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 04:26 AM) *
I stated that I would weaken truss 1, 2, and 3…then kick out the legs.

I claim a 3 staged event. [All man-made]


Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 02:54 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 31 2012, 04:13 PM) *
One floor ht per .1 secs is 13 feet per .1 sec = 130 feet per sec assuming your timing trace is correct... that would be collapse through 760 feet in 7.6 secs... no?

Was this speed a constant speed or simply average over the start and stop (time interval) and the number of floors x 13?.. or was it accelerating? That would be just under free fall (un resisted FALL).

Very interesting data Kawika...


Measure yourself on Achimspok's video analysis.

https://www.youtube.com/watch?v=JjQyXLRpULU

You can't see the entire face, so you have to guess about the lower end.
Go to the top of the page
 
+Quote Post
kawika
post Jan 6 2013, 10:02 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 4 2013, 11:55 PM) *
Guess who was the source of the "third plane" story. And who was allegedly present when the tower collapse "prediction" was made. And who was allegedly responsible for evacuating OEM for both reasons. The first directly, the second indirectly.

Rotanz.



I swear to God man, I'd love to put all of these people in one room, face to face and tell them to tell their stories down a camera lens. Live.


Almost instantly after the South Tower had been hit, I contacted the EOC to confirm that air support was on its way to New York. At that time, the EOC informed me that that there were still planes unaccounted for that may have been heading for New York. I relayed this information to the command post in the North Tower lobby. At the same time, OEM evacuated the EOC. The rest of 7 World Trade Center had been evacuated earlier, but after the report of a possible third plane, we had to get our people out of the building.



http://www.9-11commission.gov/hearings/hea...r_statement.pdf (Page 6)


I'm sorry, Mr. Slice, but Mr. Sheirer had an accident and is no longer with us. So sorry.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 03:24 PM
Post #43



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 1 2013, 07:52 PM) *
Sometimes I do not explain myself well enough.

The truss drawings show the area, that I believe mischief occurred.

It would basically be a restricted area to the general public.

Once again…I repeat that I would weaken the 3 trusses.

The legs that I would kick out in the last phase would be the other columns in this area. [5th floor to bottom of 7th floor]

Other testimony has told us that unusual events were going on here


thumbsup.gif

https://rubessteaks.com/media/catalog/produ...boneSteak_1.jpg
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 03:12 PM
Post #43





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE (SanderO @ Jan 3 2013, 08:46 AM) *
Nothing suspicious about the structural alterations. For one thing... double height spaces.. converted from two single height spaces are LESS live and dead loads. But DO required new framing. And 350 tons of steel for alterations to 19 floors is not a lot of steel... the tower's frame probably weighed in the order of 50,000 tons.

There may be concerns about fuel stored in a commercial building... even if it couldn't cause the frame to collapse... it could start add *fuel to the fire* to to speak. For example, no propane tanks are permitted in NYC for grilles and so forth. They can't be bought sold, stored or transported.

Is the implication of DYEW's post that Solomon engineered the destruction of their headquarters after spending a fortune to retrofit the building? Or that someone else took the opportunity to install the devices/mechanism to take the building down? It appears that when it did come down... the collapse was from a loss of axial support well below Solomon's floors where the alterations were performed.

Do you have a problem with any of the recommendations of the task force?

PANY(NJ) were able to avoid many code compliance issues with the erection of the WTC. This was done likely to save the developers money and ultimately compromise public safety. Nothing new here for corporations who seek to maximize profit with little to no concern for workers or the public. Just look at all the sweat shops and wage slaves that Walmart, Apple and other corporations run for profit.

The way these concessions are accomplished is back room deals and often hiding these practices as long as they can from the public. It include passage of laws and waivers on regulations and laws made easy by the old boy network. It's how power works.

Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Yes, I have a problem with the Task Force, when you've got Hauer and other 9/11 alum, who were the most likely perps and should be on trial if not in jail by now.
Go to the top of the page
 
+Quote Post
kawika
post Jan 1 2013, 02:30 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (SanderO @ Dec 30 2012, 04:25 PM) *
Thanks Elreb....

I will study these.. are there drawings for the braced frame which appears to be over the sub station in the photos.

Mr K obviously was confused.


Mr. K was not confused.

The trusses bottom elements were at floor five. He shows the bottoms only.

There is way too much importance being placed on these friggin' trusses. They support a few upper columns. Fail all the trusses and you won't see the whole building drop like a stone.
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 03:10 PM
Post #43





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 4 2013, 07:03 AM) *
Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

The OEM bunker, the sole tenant of floor 23, was a vast facility with apparently one “main” room.

Certainly there were many small, secure rooms where a tiny band of conspirators could do their work unmolested.

—an armored, self-contained facility … complete with its own air, water and power supply…
Go to the top of the page
 
+Quote Post
kawika
post Jan 2 2013, 12:33 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Dec 31 2012, 02:27 PM) *
Thanks kawika, I thought my head was going to explode getting my head round the thought of the penthouse plummeting through the steel frame! Logically, it had to be a pressure pulse. That it travelled at almost the same speed as the collapse of the building is the interesting part (for me anyway).

What do you think caused this pressure pulse?


I don't know what to call it. Maybe vibration from the penthouse hitting the 47th floor area. But I measured it--about one floor every 1/10th of a second. Too fast for gravity driven destruction.

I'm not taking credit for this. Somebody else called it a pulse. The sunlight thing was mentioned by others also.
Go to the top of the page
 
+Quote Post
elreb
post Jan 2 2013, 11:50 PM
Post #43





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 2 2013, 03:09 PM) *
If you need somebody to dig through documents or pdfs, just IM me thumbsup.gif

Thanks
Go to the top of the page
 
+Quote Post
kawika
post Jan 4 2013, 10:16 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 2 2013, 11:38 PM) *
Possible corroboration from this guy, Richard Rotanz (though I'd take anything he says with a pinch of salt - source of "third plane" excuse to evacuate OEM - allegedly)



He put it down to North Tower debris. BS..



What time was this at? Who was with him?







Corroboration of an explosion between columns 67-69 or 70-72 and below the stairway at column 73?

The core was attacked on the lower floors. Proof.


According to the BBC documentary, around 12:30 pm was when Rotanz went in.

One must know which floor he was looking at when describing the blown elevator. But you'd think it had to be a small number for this to happen. El #'s 3, 4, 17, 18, 24, or 25.
Go to the top of the page
 
+Quote Post
elreb
post Jan 6 2013, 05:40 PM
Post #43





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 6 2013, 08:59 AM) *
Elreb, do you have a source for the "hole in the wall made by the Fire Department"?

Barry Jennings said it... the firemen took us out a hole but I don't know who made it."

I'll bet you have watch that interview a dozen times.

He also said = many explosions...not just one...
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 1 2013, 08:28 PM
Post #43



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (elreb @ Jan 2 2013, 12:58 AM) *
I understand that certain parties would like to focus on column #79 and expose the NIST fairytale.

Do we have a thread dedicated to this venture?

If you cut #79 from ground level to the roof…it would have little effect on the building.

I can only imagine why NIST avoided column #80?


The almost freefall collapse of the East Penthouse is another clue (to what, I don't know yet)

http://www.youtube.com/watch?v=JjQyXLRpULU



It just fell through the building as if all support was removed throughout its downward path in one go.

Sorry if I'm jumping ahead here, but how could this be achieved? Columns 79 and 80 ran through the penthouse.





Edit: Don't Columns 76, 77 and 78 run along the "kink" area?

This post has been edited by onesliceshort: Jan 1 2013, 08:31 PM
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:29 PM
Post #43





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE (elreb @ Jan 3 2013, 04:49 PM) *
Patsy UA 93 missed its crossover with drone SB7; thus changing the plan.

That's why Bush Boy got stuck sucking his thumb in a 2nd grade classroom and all the other top government officials went off the map for 45 mins - 1 hr.

Every single one claims that when they heard about the first tower getting hit, they just continued doing whatever it was they were already doing.

QUOTE
Wolfowitz: We were having a meeting in my office. Someone said a plane had hit the World Trade Center. Then we turned on the television and we started seeing the shots of the second plane hitting, and this is the way I remember it. It’s a little fuzzy. There didn’t seem to be much to do about it immediately and we went on with whatever the meeting was. Then the whole building shook. I have to confess my first reaction was an earthquake. I didn’t put the two things together in my mind. Rumsfeld did instantly.

Paul Wolfowitz on 9/11


The WTC has just been attacked and the Sec of DEFENSE and the Asst Sec of DEFENSE didn't think it was worth bothering their pretty heads until after the Pentagon was attacked. NYC getting attacked was just another day at the office.

If everything happened by 9:00 AM like it was supposed to, all of these guys would be bragging about their heroic response to the attack, instead they had to pretend they were a bunch of clueless idiots.
Go to the top of the page
 
+Quote Post
elreb
post Jan 6 2013, 09:37 PM
Post #43





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Jan 6 2013, 02:54 PM) *
Aaah, cheers lads!

I have re-listened to both live conversations.

I did not hear Barry say anything about exploding cats. [Cars]

He did say 6th flood landing…explosion below him.

He did say he was hearing all kinds of explosions.

He did say that the OEM was empty before the second plane crash and that neither building had collapsed.

He did say that he was told of reports of more explosions.

If this is mostly all true, then the idea of a third plane…should have been = another plane.

No reports of fire, only lots of smoke and heat. [Why would it be hot?]

What could cause smoke and heat?

I smell a “Rat”. Jennings ended up dead of unknown causes.
Go to the top of the page
 
+Quote Post
kawika
post Jan 4 2013, 01:41 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 2 2013, 03:03 PM) *
Where exactly was the bunker? I had for some reason always assumed that it was on the west of the building. Must be on the east, no?

Edit: the bunker had its own air supply so I can't see it having windows?


It had blast proof windows, but they don't open.
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 06:21 PM
Post #43





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Jan 4 2013, 12:07 PM) *
Smoke before WTC1 collapsed indicates an isolated event within WTC7.

The building had smoke evacuation systems for the very purpose of keeping areas free from smoke. The mechanical systems were operational after WTC2 collapsed.

Kawika…I thing this may be bullhorn man with the cop who had a gun. [You tell me]

Although most people were evacuated from the building around the time the South Tower was hit, if not earlier (see (9:03 a.m.) September 11, 2001), after the South Tower collapses at 9:59 a.m. the security officer heads up to a floor in the 40s in WTC 7, reportedly to check that all his personnel have left.

He is initially accompanied by a police officer, but at around the 10th floor this officer has difficulty breathing, and so goes back down and exits the building.

When the North Tower collapses at 10:28 a.m., WTC 7 shakes and the stairwell goes dark.

The security officer, who has reached the 30th floor by this time, heads back down the stairs.

When he reaches the 23rd floor, where the headquarters of New York’s Office of Emergency Management (OEM) is located, he opens the door to check for any members of staff that might still be there, but finds the area filled with smoke.
Go to the top of the page
 
+Quote Post
kawika
post Jan 6 2013, 03:10 PM
Post #43





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 4 2013, 04:59 PM) *
"did not see much damage on Floors 4, 5, or 6 from their viewing location"

Very cute play on words.

These people couldn't get any further than Floor 6 (or below) on the east stairway either at 1pm?
People trapped on floors 7 and 8.
Floor 6 landing gone.
Elevators blown out of their shafts on Floor 8 or 9 (north side)


This only mentions damage to 4,5,6. It doesn't say they couldn't go above 6, nor whether 7 and above had damage. Clearly there was damage to 8/9 that they'd rather not repeat.

Be aware that the east core stair (maybe with the damaged landing) did not go below 5. At 5 you had to go through a maze transfer corridor to reach a more easterly stair that takes you down to 4 and below-- that leads to the SE exit.

The interviews that NIST did to collect all this information are, so far, not available for review.

This post has been edited by kawika: Jan 6 2013, 03:13 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 09:57 AM
Post #43





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 3 2013, 08:28 AM) *
What do they mean by "redundancy"? Bare minimum? Salomon Barney owned the top 19 floors. Six of which were converted into three double floors. And apparently the rest were designed for easy conversion.

So we have 7-8 lower level floors for a "kick" (atriums and double height), more double height floors/atriums on the upper levels and others that were minimalistic. Natural CD. No need for high explosives.

2cents


All engineered designs have redundancy... or reserve strength. For structural systems alternate load paths is another strategy often employed.... so some number of structural elements can be removed without compromising the structure's ability to perform.
Go to the top of the page
 
+Quote Post
elreb
post Jan 4 2013, 02:30 PM
Post #44





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Jan 4 2013, 07:41 AM) *
It had blast proof windows, but they don't open.

This points to mischief and or a chemical reaction going on in the area.

This goes back to the 1998 improvements.

No one ever mentioned a fire!
Go to the top of the page
 
+Quote Post
kawika
post Jan 6 2013, 06:03 PM
Post #44





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (elreb @ Jan 4 2013, 07:40 PM) *
Barry Jennings said it... the firemen took us out a hole but I don't know who made it."

I'll bet you have watch that interview a dozen times.

He also said = many explosions...not just one...


http://southeastasianews.org/main/barry_jennings.html

@6:08-- Describes explosions, but that they might be cars outside.

@7:05-- Took us out through a hole in the wall

@13:55-- Heard explosions
Go to the top of the page
 
+Quote Post
SanderO
post Jan 3 2013, 07:55 PM
Post #44





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (DoYouEverWonder @ Jan 3 2013, 03:12 PM) *
Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Yes, I have a problem with the Task Force, when you've got Hauer and other 9/11 alum, who were the most likely perps and should be on trial if not in jail by now.


I simply asked you what problem you had with the recommendations of the panel. I find that most of these blue ribbon panels are composed of the same types of people... Why would this be any different? You have to be a high achiever in their game to get appointed.

I am not an apologist for anyone or anything. Your manners and language leave a lot to be desired. And I don't get paid for anything I post online... or sell books, or CDs either.
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 04:22 PM
Post #44





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (DoYouEverWonder @ Jan 3 2013, 09:12 AM) *
Your apologist bullshit is getting old. I hope you at least get paid for your troubles.

Take a number…there is a long line in front of you…
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 10:32 PM
Post #44



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika @ Jan 5 2013, 03:16 AM) *
According to the BBC documentary, around 12:30 pm was when Rotanz went in.

One must know which floor he was looking at when describing the blown elevator. But you'd think it had to be a small number for this to happen. El #'s 3, 4, 17, 18, 24, or 25.


The very fact that he claims to have seen two elevators blown out to the "north of the elevator shafts" is the main point (for me anyway - it certainly wasn't "fallen debris" that caused this, ya know?)

He claimed to be on the 8th or 9th floor (if he's to be believed). More likely the 9th as Jennings doesn't mention this? And Hess was seen at the 8th floor corner window (where is this room in relation to the elevators?).

More corroboration comes in the form of this other guy who had to be rescued as well. He couldn't get beyond the 8th floor either.

I wonder which entrance or stairwell this guy Rotanz allegedly entered. And are there any firefighter testimonies as to how they actually reached the 8th floor?
Go to the top of the page
 
+Quote Post
elreb
post Jan 3 2013, 08:53 PM
Post #44





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (DoYouEverWonder @ Jan 3 2013, 02:29 PM) *
That's why Bush Boy got stuck sucking his thumb in a 2nd grade classroom and all the other top government officials...a bunch of clueless idiots.

This is what I like about you.

You agree that there was an “OP” and not go off in left field trying to convince me that I do not know what a truss is.

Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 4 2013, 11:58 AM
Post #44



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika @ Jan 4 2013, 02:39 AM) *
First two small rectangles left of the "Truss 1" arrow head, in the grey area. Which is also just east of column 73, shown nearby.


Possible corroboration from this guy, Richard Rotanz (though I'd take anything he says with a pinch of salt - source of "third plane" excuse to evacuate OEM - allegedly)

QUOTE
from inside the building at the 8th or 9th Floor elevator lobby, where two elevator cars were ejected from their shafts and landed in the hallway north of the elevator shaft


He put it down to North Tower debris. BS..



What time was this at? Who was with him?

There's also this anonymous guy who was allegedly making his way to the upper floors (escorted by a cop who couldn't make it because he couldn't breathe) and was supposedly rescued along with Jennings and Hess??

http://www.historycommons.org/context.jsp?...securityofficer

http://www.historycommons.org/context.jsp?...210threerescued

Weird shit.

Edit: the last guy was described as "security" and as working for the company on the upper floors - Silverstein/Salomon Barney. There was a lot of comings and goings in that building.

This post has been edited by onesliceshort: Jan 4 2013, 12:03 PM
Go to the top of the page
 
+Quote Post
SanderO
post Jan 1 2013, 11:35 AM
Post #44





Group: Troll
Posts: 1,174
Joined: 23-December 09
From: NYC
Member No.: 4,814



QUOTE (onesliceshort @ Jan 1 2013, 08:32 AM) *
Now this is where SanderO contradicts himself.

He claims that the prospect of a man-made event to bring the building down is impossible — "every exterior column being ~simultaneously severed over eight floors", yet also claims that a heat induced collapse was almost inevitable — "building design flaws"

What he calls my "gotcha" approach is actually my way of trying to cut through the waffle and narrow the argument down.

SanderO, if you want a mature, constructive discussion, you have to get it into your head that you're not talking to idiots.




No he doesn't claim that a man made event is impossible... never did. He (me) claims that it hasn't been demonstrated. What has been demonstrated is that the NIST explanation is not correct.

I don't recall use of the term *building design flaws*. But if I did use this I would have meant to say that it was the nature of the engineering design and decisions which enabled the tower to collapse as it did.

When engineers design redundancy into a structure... they do so with several strategies... provide for extra strength (high FOS).. and alternate load paths which can direct loads when parts of the structure (usually columns) fail. This is connected to adequate FOS... as loads will ALWAYS find a new path in a composite structure... whether or not the new found load paths can carry the additional loads.

I would argue that the designs of both the twin towers and 7 did not meet this standard. The engineers chose to perhaps increase the FOS... an amount which is yet to be conclusively determined. But they did not provide for alternate load paths and DID use trusses which are subject to catastrophic failure. This doesn't mean trusses can't perform. They do. But they have multiple failure points and can take the entire structure with it... like a bridge failure.

So by *design flaw* I mean that the 2 designs (twins and 7) had inherent design engineering features which would not arrest some failure modes... but enable them. The designs would promote runaway progressive cascading failures.

Do you agree?
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post Jan 3 2013, 08:00 AM
Post #44





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



QUOTE
Does anyone know what was under the East penthouse?


From what I remember that was one of the places they took floors out of, to put in a trading floor with tall ceilings.

QUOTE
Much of the new electrical, air-conditioning and mechanical equipment will serve three double-height trading floors. To create the extra height, workers are removing most of three existing floors, using jackhammers to demolish concrete slabs and torches to remove steel decking and girders beneath the concrete.

After the girders are cut into sections small enough to fit into a construction elevator they will be sold as scrap for about 4 cents a pound.

In some office buildings, that alteration would be impossible, but Silverstein Properties tried to second-guess the needs of potential tenants when it designed Seven World Trade Center as a speculative project.

''We built in enough redundancy to allow entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors,'' said Larry Silverstein, president of the company. ''Sure enough, Salomon had that need.

<snip>

MORE than 375 tons of steel - requiring 12 miles of welding - will be installed to reinforce floors for Salomon's extra equipment. Sections of the existing stone facade and steel bracing will be temporarily removed so that workers using a roof crane can hoist nine diesel generators onto the tower's fifth floor, where they will become the core of a back-up power station.

NYT


QUOTE
In November 1988, Salomon Brothers withdrew from plans to build a large new complex at Columbus Circle in Midtown and agreed to a 20-year lease for the top 19 floors of 7 World Trade Center.[25] The building was extensively renovated in 1989 to accommodate the needs of Salomon Brothers. This led to the alternative naming of the building as the Salomon Brothers building.[26] Most of three existing floors were removed as tenants continued to occupy other floors, and more than 350 tons (U.S.) of steel were added to construct three double-height trading floors. Nine diesel generators were installed on the 5th floor as part of a backup power station. "Essentially, Salomon is constructing a building within a building – and it's an occupied building, which complicates the situation," said a district manager of Silverstein Properties. The unusual task was possible, said Larry Silverstein, because it was designed to allow for "entire portions of floors to be removed without affecting the building's structural integrity, on the assumption that someone might need double-height floors.

Wikipedia


This post has been edited by DoYouEverWonder: Jan 3 2013, 08:19 AM
Go to the top of the page
 
+Quote Post
kawika
post Jan 5 2013, 11:31 AM
Post #45





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 3 2013, 12:32 AM) *
The very fact that he claims to have seen two elevators blown out to the "north of the elevator shafts" is the main point (for me anyway - it certainly wasn't "fallen debris" that caused this, ya know?)

He claimed to be on the 8th or 9th floor (if he's to be believed). More likely the 9th as Jennings doesn't mention this? And Hess was seen at the 8th floor corner window (where is this room in relation to the elevators?).

More corroboration comes in the form of this other guy who had to be rescued as well. He couldn't get beyond the 8th floor either.

I wonder which entrance or stairwell this guy Rotanz allegedly entered. And are there any firefighter testimonies as to how they actually reached the 8th floor?


Just to be clear, sometime after 10:15 the other guy went as high as 30 then got back to 7 where he was trapped until rescue.

Is it possible that this elevator event made it impossible to traverse from the east to west, thereby preventing him from getting to Hess? He was trapped in the west, Hess/Jennings east.
Go to the top of the page
 
+Quote Post
onesliceshort
post Jan 5 2013, 12:14 PM
Post #46



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE (kawika @ Jan 5 2013, 04:31 PM) *
Just to be clear, sometime after 10:15 the other guy went as high as 30 then got back to 7 where he was trapped until rescue.

Is it possible that this elevator event made it impossible to traverse from the east to west, thereby preventing him from getting to Hess? He was trapped in the west, Hess/Jennings east.


So the elevators were out of service from at least 10:15 (earlier according to Jennings), he and the cop climbed the west stairway, cop gave up at Floor 10, he continued to Floor 30, came back down the west stairway and got stuck on Floor 7. So the stairway at Floor 7 or below was inaccessible? So too was the stairway to the east of the building?

Sorry to pick your brains on this kawika but does it mention anywhere why this guy couldn't get out of there? And how this other guy Richard Rotanz and the other firefighters that rescued both parties managed to get up there?

That's what always confused me. Jennings said that he had to "climb back up" but didn't give details as to how the firefighter actually reached him.

This post has been edited by onesliceshort: Jan 5 2013, 12:15 PM
Go to the top of the page
 
+Quote Post
kawika
post Jan 5 2013, 12:40 PM
Post #47





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Jan 3 2013, 02:14 PM) *
So the elevators were out of service from at least 10:15 (earlier according to Jennings), he and the cop climbed the west stairway, cop gave up at Floor 10, he continued to Floor 30, came back down the west stairway and got stuck on Floor 7. So the stairway at Floor 7 or below was inaccessible? So too was the stairway to the east of the building?

Sorry to pick your brains on this kawika but does it mention anywhere why this guy couldn't get out of there? And how this other guy Richard Rotanz and the other firefighters that rescued both parties managed to get up there?

That's what always confused me. Jennings said that he had to "climb back up" but didn't give details as to how the firefighter actually reached him.


All very good questions. I don't have the answers, YET. We have no corroboration for the timing of the rescue. This is something that I find very odd. A team of 10 rescuers making their way to and into the building, leaving no radio transmissions behind, seems impossible.

We cannot be sure which stair the guy used, nor can we be sure which stair Jennings used. I can say that there are other interesting pre- 10:28 am stair observations. It is not conclusive at this time. Keep digging.

The passenger elevators were working during Jennings' first two trips, but for some unknown reason they utilized a western freight elevator to get back up to 23.

This post has been edited by kawika: Jan 5 2013, 01:00 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #101



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #121



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #141



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #201



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #301



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #401



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Nov 29 2012, 08:22 PM
Post #501



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Apr 3 2013, 10:59 PM
Post #501



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
If a close to FF collapse caused by destruction of axial load paths at the bottom.... wouldn't a FF collapse of 8 stories result of the structure below 8 catastrophically failed? Are bombs the ONLY way a structure can fail? One with fires burning for 7 hrs and not fire suppression over 30,000 gal of diesel? That's quite the barbe!

Why do intelligent people refuse to understand a (structural) system cascading failure? This wasn't invented on 9/11. It's settled science.


Can you believe the horseshit that this guy posts unchallenged on a supposedly "neutral" forum?

I see lots of "psychoanalysis" on the cultists here but there are definitely a few "goggles" overlooked (Major_Tom knows what I'm talking about).
Go to the top of the page
 
+Quote Post
IsaacNewton
post Sep 11 2014, 04:37 AM
Post #502





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



One post, banned forever. What's the story with this Phil Jayhan character?



This post has been edited by IsaacNewton: Sep 11 2014, 04:39 AM
Go to the top of the page
 
+Quote Post
onesliceshort
post Jul 11 2013, 08:35 AM
Post #502



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



SEC corruption. Very relevant to WTC7.

http://youtu.be/2IzB0o3RJTs
Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 19 2014, 02:49 PM
Post #502





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



Hey guys....

You know, I actually solved the mystery of whether or not Building 7 was brought down by explosives long before it ever happened.... all the way back in 1686. Though the possible composition and placement of the explosives can still be debated, the fact that they were indeed composed and placed cannot.

Newtonian physical principles haven't changed. It's physically impossible for the lower part of the asymmetrically damaged building (three core columns and nine perimeter columns) to have progressively/naturally collapsed in any way that could result in the upper part of the building symmetrically descending straight down through itself (starting with column 79, circled below), through the path of greatest resistance, at anything near gravitational acceleration for any period of time....



....and there is absolutely no mode or combination of modes of progressive/natural structural failure driven solely by gravity that can ever give rise to the conditions required (below) for free fall to have occurred at any point during its descent....



....and anyone who believes otherwise (below) belongs in a lunatic asylum (I know, I've been in one)....



There is simply no point during a natural progressive gravity driven collapse of a steel frame skyscraper like this where one could say....

"Hold it.... right there! That's the point where all the steel columns and structural
components
that were supporting the building just a moment ago (with an area
greater than that of a football field) will undoubtedly be found to be behaving in a
manner very much like air (below left).... so much so that it will take very careful
calculation to tell the fall times apart during this period of the
ongoing progressive structural failure (below right)"....




How could anyone really believe that it's not only possible but probable that the lower asymmetrically damaged part of the building progressively/naturally collapsed in a way that resulted in the upper part of the building actually accelerating as it descended symmetrically straight down through itself, through the path of greatest resistance (below right), and also, incredibly, that driven on solely by gravity it actually continued to accelerate so nearly to gravitational acceleration (below left) as to require very careful calculation for any difference between the two to be detected....



So far, the explosion model (below) is still the only one....



....that can realistically match and empirically be expected to create the conditions (below) that we know must have existed....



....beneath the literally falling visible upper part of the building (below) during its observed largely symmetrical descent at gravitational acceleration for approximately 105 feet in 2.25 seconds....



The undisputed confirmed observation of a significant period of gravitational acceleration....



....means an explosion or other type of event must have occurred that was powerful enough to quickly remove the support from beneath the upper part of the building (below right), either all at once or incrementally in advance of its descent, permitting it to descend at gravitational acceleration for the observed period and under the conditions required (below left) for free fall to occur....



I'm afraid there's simply no other explanation, the building was brought down by means of explosives.... that's just the way it is.

Sincerely, Isaac Newton

This post has been edited by IsaacNewton: Aug 19 2014, 02:56 PM
Go to the top of the page
 
+Quote Post
onesliceshort
post Apr 3 2013, 10:59 PM
Post #502



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
If a close to FF collapse caused by destruction of axial load paths at the bottom.... wouldn't a FF collapse of 8 stories result of the structure below 8 catastrophically failed? Are bombs the ONLY way a structure can fail? One with fires burning for 7 hrs and not fire suppression over 30,000 gal of diesel? That's quite the barbe!

Why do intelligent people refuse to understand a (structural) system cascading failure? This wasn't invented on 9/11. It's settled science.


Can you believe the horseshit that this guy posts unchallenged on a supposedly "neutral" forum?

I see lots of "psychoanalysis" on the cultists here but there are definitely a few "goggles" overlooked (Major_Tom knows what I'm talking about).
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 05:46 PM
Post #502





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I believe it was Sigmund Freud who explained the psychological defense of “distorting reality” and called it = “Projection”.

Most “GL’s” need to maintain their social compartment and find refuge in generating confusion and a distortion/coping mechanism

In effect, what they call you…is what they are.

If they accuse you of “stupid” behavior…in reality…they are exposing their own nature.

In some cases…it is a compulsive obsession disorder.

In either case…it denies reality…

ADD:

Your mother's so stupid she exercises when she could just get like, liposuction or something!

Your mother is so stupid that she goes to Barney's Rooftop Deck Restaurant for lunch and orders a niçoise salad and calls it a 'ni-coise' salad.

Your mother's butt is so hairy, it looks like Don King's about to pop out and say, "Only in America”
Go to the top of the page
 
+Quote Post
elreb
post Apr 7 2013, 04:22 PM
Post #502





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



This is after 10:30 am

We see the broken window and fire mentioned by "the bullhorn guy".

We see water pressure…and down the street we see lights on.

If necessary, I have a photo of the hydrant.
Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 26 2014, 06:11 AM
Post #502





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



Hey kawika....

I see you "liked" my animations over at The911Forum, glad you enjoyed them.... there's more! My post here is actually distilled from a two month long exchange.... "What Is Free Fall?".... that I lured Dr. Alan Calverd into (a seasoned forty year veteran Ph.D. research physicist) that was devoted exclusively to this topic over at TheNakedScientists. One of the weirdest converstaions (six pages) I've ever had....



Also (off topic), I started another thread there questioning the authenticity of photographs taken during the Apollo Moon Landing.... "Was This Apollo Photograph (AS14-66-9306) Really Taken On The Moon?".... more animations there, and another really weird conversation (two pages)....



.

This post has been edited by IsaacNewton: Aug 26 2014, 06:14 AM
Go to the top of the page
 
+Quote Post
elreb
post Apr 21 2013, 01:17 PM
Post #502





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617





Go to the top of the page
 
+Quote Post
onesliceshort
post Apr 4 2013, 02:02 PM
Post #502



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Conclusion: Something else besides fire made the building free-fall.


That's the bottom line.

The guys at 9/11 Forum agree that NIST was a crock. We have evidence and FDNY statements (alleged but nobody has denied them) that there were no fires on the lower floors coupled with multiple images. And the disregard for physics in that there would have been a need for a raging fire for over 3.5 hours minimum before any heat based theory can even be contemplated, etc, etc.

You can talk in extreme detail about how WTC7 collapsed as it was going down but if the very basic concept that there were no fires to provide a "natural" explanation is passed over like some irrelevant detail, anything after that is like pissing into the wind.

I mean, visual evidence provided here is "irrelevant"? Fireproofing? The actual constant heat required? FDNY statements? Admission of freefall acceleration by a person that got off his ass and approached NIST and actually forced NIST to admit they were wrong. And whose achievement has since been trolled to death. Samples of sulfidized steel that have never been explained but basically put down to "acid rain" (yea! that'll do! Let's move on!).

Yeah, I'm the cultist.

@elreb

It's not the "swine pit" lol. It's taken from a SanderO quote alright, but from 9/11 Forums. The "neutral" forum. rolleyes.gif
Go to the top of the page
 
+Quote Post
kawika
post Aug 21 2014, 09:10 AM
Post #502





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Excellent!

NIST tells us that the East Penthouse falling indicates C79 was buckling, dragging all the floors from F13 up to the roof downward. Then the floors from east to west experienced a progressive collapse, essentially gutting the interior. Then the facade fell straight down.

If this were true we should have seen severe deformation of the exterior surfaces as the floors hinged downwards. Granite panels and windows would have been popping out. We should have seen dust being ejected from the openings.

WTC7 was demolished from the lower area, probably at least eight floors above F7 where the extremely strong cantilever girders (9 foot tall!) were located.

Take a look at this monster!

https://onedrive.live.com/redir?resid=E097D925456F1330%21220

This post has been edited by kawika: Aug 21 2014, 09:12 AM
Go to the top of the page
 
+Quote Post
DoYouEverWonder
post May 14 2013, 06:53 AM
Post #502





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



Implosion Interruptus: Silo Needs Extra Push To Come Down

http://youtu.be/c6zG2lTNjcE

This is what the collapse of WTC 7 should have looked like if the building failed only because of fires on the lower floors.

Go to the top of the page
 
+Quote Post
elreb
post Apr 7 2013, 05:07 PM
Post #502





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Back in the late 1700’s a “Loyalist” was a person who remained loyal to the kingdom and were often called “Royalist” or “Kings Men”.

They were totally opposed to “Patriots”.

Empire or freedom forced Americans to choose sides.

A loyalists/royalist always sought a “Gain” and placed no value in rights, freedom or life.

They were pillars of social conflict and immoral activities. They encourage murder, hatred, and “bias-motivated crime”.

Rights are granted and endowed to the Kings men “Only” and common Americans are the source of the funding.

Go to the top of the page
 
+Quote Post
kawika
post Apr 4 2013, 10:45 AM
Post #502





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Apr 2 2013, 12:59 AM) *
Can you believe the horseshit that this guy posts unchallenged on a supposedly "neutral" forum?

I see lots of "psychoanalysis" on the cultists here but there are definitely a few "goggles" overlooked (Major_Tom knows what I'm talking about).


A 30,000 gallon diesel fuel BarBeQue?

Actually it was 36,000 and they were buried under 3 feet of concrete slab in the loading dock. 19,000 gallons were recovered from Silverstein's tanks and the rest was lost into the soil by some yet to be determined mechanism.

There was absolutely no evidence of fuel fires at any time, certainly not seven hours worth.

The transfer trusses were not subjected to any fire, because that fire would have to be below floor seven.

Conclusion: Something else besides fire made the building free-fall.
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 02:10 PM
Post #503





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Apr 4 2013, 08:02 AM) *
@elreb

It's not the "swine pit" lol. It's taken from a SanderO quote alright, but from 9/11 Forums. The "neutral" forum. rolleyes.gif

No, no…I am talking ‘Swine Pit”

QUOTE
“You have the same gravity did it, as does NIST.”

Don't need NIST.

NIST is like a trap, catching the gullible 911 truth followers who can't do math, physics, and they love (911 truth followers) to make fun of models; they can't comprehend the math behind the models, so them make fun of them.

NIST, a trap to discover those who lack knowledge.

You have been labeled troll by the dolt Balsamo. [dolt = A stupid person]

Quote:

Go play at the govt loyalist site, Jeff... you have worn out your welcome here....

What did you call the govt loyalist site posters?

Legacy, the legacy of Gage, spreading nonsense about CD and thermite.


My add =
"In a time of universal deceit - telling the truth is a revolutionary act."

New add =
QUOTE
"you well know that it takes very little to become persona non grata at PfT JSO questioned the "Pilots of Failed Tactics" on their dearly held idiocy"

Which is not true. We asked for his evidence.
Go to the top of the page
 
+Quote Post
IsaacNewton
post Sep 11 2014, 04:16 AM
Post #503





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



I posted a longer more detailed version of the above post over at LetsRollForums and was immediately banned forever.... http://letsrollforums.com/showpost.php?p=2...mp;postcount=25
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 12:47 PM
Post #503





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Apr 4 2013, 04:45 AM) *
Conclusion: Something else besides fire made the building free-fall.

The “Swine Pit” has been listening with deaf ears.

10 pages of name calling and not one cap full of evidence.

These guys should sell hot air balloons.

Pretty soon, they will have Jeff cleaning the Out-houses!
Go to the top of the page
 
+Quote Post
NP1Mike
post Sep 11 2014, 05:51 PM
Post #503





Group: Active Forum Pilot
Posts: 422
Joined: 25-November 13
Member No.: 7,592



QUOTE (IsaacNewton @ Sep 11 2014, 03:37 AM) *
One post, banned forever. What's the story with this Phil Jayhan character?



I gave my best effort to provide solid, personal research and input to that forum.
I no longer go there anymore.

If you don't tow the line and kiss their rear ends regularly, you will be given the boot.

They have very specific theories as to what happened on 9/11.
If you don't agree with their theories they have no use for you and would rather you get lost.
They don't want to hear alternative theories, or the worst, theories that directly counter their personal theories.


Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 22 2014, 11:11 PM
Post #503





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
Excellent!

Thanks man (nice to meet you).

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
NIST tells us that the East Penthouse falling indicates C79 was buckling, dragging all the floors from F13 up to the roof downward. Then the floors from east to west experienced a progressive collapse, essentially gutting the interior. Then the facade fell straight down.

Right, they describe a progressive collapse (starting with column 79 on the left) over an area greater than a football field....



....that essentially happens all at once, which is obviously inconsistent with physical principles governing progressive structural failure (the time consuming sequential faililure of a series of structural components)....


But, as we know from fundamental well established and time tested empirically verifiable experiment, even if a giant laser beam suddenly vaporized the interior of the building causing the exterior columns to begin buckling, free fall still would not occur for even a moment. The strength of buckling columns (whether buckled one at a time or all at once) doesn't just go from 100% to 0% when they fail, they go from 100% to 0% while they fail, and that takes time.

Buckling, whether caused by heat....


....or overloading....


....cannot create the conditions required for gravitational accelration to occur, it's literally impossible. Some force must have been used to quickly remove all support from the literally falling visible upper part of the building seen in the video....


Control on the right, details....
http://picasion.com/pic76/ef2992a1bed34a1a...8f520c5ad7e.gif
This is currently the only empirically verifiable scenario that matches observations.

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
If this were true we should have seen severe deformation of the exterior surfaces as the floors hinged downwards. Granite panels and windows would have been popping out. We should have seen dust being ejected from the openings.

Agreed. The video evidence doesn't show any "hollowing out" stage either, with the exception of the descent of the Eest Penthouse, all the rest of the columns essentially failed at the same time.

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
WTC7 was demolished from the lower area, probably at least eight floors above F7 where the extremely strong cantilever girders (9 foot tall!) were located.

Even someone with a botched hemisperectomy can see it, it's the Law, the building was brought down by explosives.... that's just the way it is.

This post has been edited by IsaacNewton: Aug 22 2014, 11:25 PM
Go to the top of the page
 
+Quote Post
kawika
post Apr 4 2013, 10:45 AM
Post #503





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



QUOTE (onesliceshort @ Apr 2 2013, 12:59 AM) *
Can you believe the horseshit that this guy posts unchallenged on a supposedly "neutral" forum?

I see lots of "psychoanalysis" on the cultists here but there are definitely a few "goggles" overlooked (Major_Tom knows what I'm talking about).


A 30,000 gallon diesel fuel BarBeQue?

Actually it was 36,000 and they were buried under 3 feet of concrete slab in the loading dock. 19,000 gallons were recovered from Silverstein's tanks and the rest was lost into the soil by some yet to be determined mechanism.

There was absolutely no evidence of fuel fires at any time, certainly not seven hours worth.

The transfer trusses were not subjected to any fire, because that fire would have to be below floor seven.

Conclusion: Something else besides fire made the building free-fall.
Go to the top of the page
 
+Quote Post
onesliceshort
post Apr 4 2013, 02:02 PM
Post #504



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



QUOTE
Conclusion: Something else besides fire made the building free-fall.


That's the bottom line.

The guys at 9/11 Forum agree that NIST was a crock. We have evidence and FDNY statements (alleged but nobody has denied them) that there were no fires on the lower floors coupled with multiple images. And the disregard for physics in that there would have been a need for a raging fire for over 3.5 hours minimum before any heat based theory can even be contemplated, etc, etc.

You can talk in extreme detail about how WTC7 collapsed as it was going down but if the very basic concept that there were no fires to provide a "natural" explanation is passed over like some irrelevant detail, anything after that is like pissing into the wind.

I mean, visual evidence provided here is "irrelevant"? Fireproofing? The actual constant heat required? FDNY statements? Admission of freefall acceleration by a person that got off his ass and approached NIST and actually forced NIST to admit they were wrong. And whose achievement has since been trolled to death. Samples of sulfidized steel that have never been explained but basically put down to "acid rain" (yea! that'll do! Let's move on!).

Yeah, I'm the cultist.

@elreb

It's not the "swine pit" lol. It's taken from a SanderO quote alright, but from 9/11 Forums. The "neutral" forum. rolleyes.gif
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 12:47 PM
Post #504





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (kawika @ Apr 4 2013, 04:45 AM) *
Conclusion: Something else besides fire made the building free-fall.

The “Swine Pit” has been listening with deaf ears.

10 pages of name calling and not one cap full of evidence.

These guys should sell hot air balloons.

Pretty soon, they will have Jeff cleaning the Out-houses!
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 02:10 PM
Post #505





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



QUOTE (onesliceshort @ Apr 4 2013, 08:02 AM) *
@elreb

It's not the "swine pit" lol. It's taken from a SanderO quote alright, but from 9/11 Forums. The "neutral" forum. rolleyes.gif

No, no…I am talking ‘Swine Pit”

QUOTE
“You have the same gravity did it, as does NIST.”

Don't need NIST.

NIST is like a trap, catching the gullible 911 truth followers who can't do math, physics, and they love (911 truth followers) to make fun of models; they can't comprehend the math behind the models, so them make fun of them.

NIST, a trap to discover those who lack knowledge.

You have been labeled troll by the dolt Balsamo. [dolt = A stupid person]

Quote:

Go play at the govt loyalist site, Jeff... you have worn out your welcome here....

What did you call the govt loyalist site posters?

Legacy, the legacy of Gage, spreading nonsense about CD and thermite.


My add =
"In a time of universal deceit - telling the truth is a revolutionary act."

New add =
QUOTE
"you well know that it takes very little to become persona non grata at PfT JSO questioned the "Pilots of Failed Tactics" on their dearly held idiocy"

Which is not true. We asked for his evidence.
Go to the top of the page
 
+Quote Post
elreb
post Apr 4 2013, 05:46 PM
Post #506





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



I believe it was Sigmund Freud who explained the psychological defense of “distorting reality” and called it = “Projection”.

Most “GL’s” need to maintain their social compartment and find refuge in generating confusion and a distortion/coping mechanism

In effect, what they call you…is what they are.

If they accuse you of “stupid” behavior…in reality…they are exposing their own nature.

In some cases…it is a compulsive obsession disorder.

In either case…it denies reality…

ADD:

Your mother's so stupid she exercises when she could just get like, liposuction or something!

Your mother is so stupid that she goes to Barney's Rooftop Deck Restaurant for lunch and orders a niçoise salad and calls it a 'ni-coise' salad.

Your mother's butt is so hairy, it looks like Don King's about to pop out and say, "Only in America”
Go to the top of the page
 
+Quote Post
elreb
post Apr 7 2013, 04:22 PM
Post #507





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



This is after 10:30 am

We see the broken window and fire mentioned by "the bullhorn guy".

We see water pressure…and down the street we see lights on.

If necessary, I have a photo of the hydrant.
Go to the top of the page
 
+Quote Post
elreb
post Apr 7 2013, 05:07 PM
Post #508





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617



Back in the late 1700’s a “Loyalist” was a person who remained loyal to the kingdom and were often called “Royalist” or “Kings Men”.

They were totally opposed to “Patriots”.

Empire or freedom forced Americans to choose sides.

A loyalists/royalist always sought a “Gain” and placed no value in rights, freedom or life.

They were pillars of social conflict and immoral activities. They encourage murder, hatred, and “bias-motivated crime”.

Rights are granted and endowed to the Kings men “Only” and common Americans are the source of the funding.

Go to the top of the page
 
+Quote Post
elreb
post Apr 21 2013, 01:17 PM
Post #509





Group: Extreme Forum Pilot
Posts: 2,589
Joined: 31-December 07
From: Maui
Member No.: 2,617





Go to the top of the page
 
+Quote Post
DoYouEverWonder
post May 14 2013, 06:53 AM
Post #510





Group: Active Forum Pilot
Posts: 770
Joined: 1-February 09
Member No.: 4,096



Implosion Interruptus: Silo Needs Extra Push To Come Down

http://youtu.be/c6zG2lTNjcE

This is what the collapse of WTC 7 should have looked like if the building failed only because of fires on the lower floors.

Go to the top of the page
 
+Quote Post
onesliceshort
post Jul 11 2013, 08:35 AM
Post #511



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095



SEC corruption. Very relevant to WTC7.

http://youtu.be/2IzB0o3RJTs
Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 19 2014, 02:49 PM
Post #512





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



Hey guys....

You know, I actually solved the mystery of whether or not Building 7 was brought down by explosives long before it ever happened.... all the way back in 1686. Though the possible composition and placement of the explosives can still be debated, the fact that they were indeed composed and placed cannot.

Newtonian physical principles haven't changed. It's physically impossible for the lower part of the asymmetrically damaged building (three core columns and nine perimeter columns) to have progressively/naturally collapsed in any way that could result in the upper part of the building symmetrically descending straight down through itself (starting with column 79, circled below), through the path of greatest resistance, at anything near gravitational acceleration for any period of time....



....and there is absolutely no mode or combination of modes of progressive/natural structural failure driven solely by gravity that can ever give rise to the conditions required (below) for free fall to have occurred at any point during its descent....



....and anyone who believes otherwise (below) belongs in a lunatic asylum (I know, I've been in one)....



There is simply no point during a natural progressive gravity driven collapse of a steel frame skyscraper like this where one could say....

"Hold it.... right there! That's the point where all the steel columns and structural
components
that were supporting the building just a moment ago (with an area
greater than that of a football field) will undoubtedly be found to be behaving in a
manner very much like air (below left).... so much so that it will take very careful
calculation to tell the fall times apart during this period of the
ongoing progressive structural failure (below right)"....




How could anyone really believe that it's not only possible but probable that the lower asymmetrically damaged part of the building progressively/naturally collapsed in a way that resulted in the upper part of the building actually accelerating as it descended symmetrically straight down through itself, through the path of greatest resistance (below right), and also, incredibly, that driven on solely by gravity it actually continued to accelerate so nearly to gravitational acceleration (below left) as to require very careful calculation for any difference between the two to be detected....



So far, the explosion model (below) is still the only one....



....that can realistically match and empirically be expected to create the conditions (below) that we know must have existed....



....beneath the literally falling visible upper part of the building (below) during its observed largely symmetrical descent at gravitational acceleration for approximately 105 feet in 2.25 seconds....



The undisputed confirmed observation of a significant period of gravitational acceleration....



....means an explosion or other type of event must have occurred that was powerful enough to quickly remove the support from beneath the upper part of the building (below right), either all at once or incrementally in advance of its descent, permitting it to descend at gravitational acceleration for the observed period and under the conditions required (below left) for free fall to occur....



I'm afraid there's simply no other explanation, the building was brought down by means of explosives.... that's just the way it is.

Sincerely, Isaac Newton

This post has been edited by IsaacNewton: Aug 19 2014, 02:56 PM
Go to the top of the page
 
+Quote Post
kawika
post Aug 21 2014, 09:10 AM
Post #513





Group: Active Forum Pilot
Posts: 477
Joined: 16-August 07
From: Upstate NY/VT border
Member No.: 1,719



Excellent!

NIST tells us that the East Penthouse falling indicates C79 was buckling, dragging all the floors from F13 up to the roof downward. Then the floors from east to west experienced a progressive collapse, essentially gutting the interior. Then the facade fell straight down.

If this were true we should have seen severe deformation of the exterior surfaces as the floors hinged downwards. Granite panels and windows would have been popping out. We should have seen dust being ejected from the openings.

WTC7 was demolished from the lower area, probably at least eight floors above F7 where the extremely strong cantilever girders (9 foot tall!) were located.

Take a look at this monster!

https://onedrive.live.com/redir?resid=E097D925456F1330%21220

This post has been edited by kawika: Aug 21 2014, 09:12 AM
Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 22 2014, 11:11 PM
Post #514





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
Excellent!

Thanks man (nice to meet you).

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
NIST tells us that the East Penthouse falling indicates C79 was buckling, dragging all the floors from F13 up to the roof downward. Then the floors from east to west experienced a progressive collapse, essentially gutting the interior. Then the facade fell straight down.

Right, they describe a progressive collapse (starting with column 79 on the left) over an area greater than a football field....



....that essentially happens all at once, which is obviously inconsistent with physical principles governing progressive structural failure (the time consuming sequential faililure of a series of structural components)....


But, as we know from fundamental well established and time tested empirically verifiable experiment, even if a giant laser beam suddenly vaporized the interior of the building causing the exterior columns to begin buckling, free fall still would not occur for even a moment. The strength of buckling columns (whether buckled one at a time or all at once) doesn't just go from 100% to 0% when they fail, they go from 100% to 0% while they fail, and that takes time.

Buckling, whether caused by heat....


....or overloading....


....cannot create the conditions required for gravitational accelration to occur, it's literally impossible. Some force must have been used to quickly remove all support from the literally falling visible upper part of the building seen in the video....


Control on the right, details....
http://picasion.com/pic76/ef2992a1bed34a1a...8f520c5ad7e.gif
This is currently the only empirically verifiable scenario that matches observations.

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
If this were true we should have seen severe deformation of the exterior surfaces as the floors hinged downwards. Granite panels and windows would have been popping out. We should have seen dust being ejected from the openings.

Agreed. The video evidence doesn't show any "hollowing out" stage either, with the exception of the descent of the Eest Penthouse, all the rest of the columns essentially failed at the same time.

QUOTE (kawika @ Aug 21 2014, 08:10 AM) *
WTC7 was demolished from the lower area, probably at least eight floors above F7 where the extremely strong cantilever girders (9 foot tall!) were located.

Even someone with a botched hemisperectomy can see it, it's the Law, the building was brought down by explosives.... that's just the way it is.

This post has been edited by IsaacNewton: Aug 22 2014, 11:25 PM
Go to the top of the page
 
+Quote Post
IsaacNewton
post Aug 26 2014, 06:11 AM
Post #515





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



Hey kawika....

I see you "liked" my animations over at The911Forum, glad you enjoyed them.... there's more! My post here is actually distilled from a two month long exchange.... "What Is Free Fall?".... that I lured Dr. Alan Calverd into (a seasoned forty year veteran Ph.D. research physicist) that was devoted exclusively to this topic over at TheNakedScientists. One of the weirdest converstaions (six pages) I've ever had....



Also (off topic), I started another thread there questioning the authenticity of photographs taken during the Apollo Moon Landing.... "Was This Apollo Photograph (AS14-66-9306) Really Taken On The Moon?".... more animations there, and another really weird conversation (two pages)....



.

This post has been edited by IsaacNewton: Aug 26 2014, 06:14 AM
Go to the top of the page
 
+Quote Post
IsaacNewton
post Sep 11 2014, 04:16 AM
Post #516





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



I posted a longer more detailed version of the above post over at LetsRollForums and was immediately banned forever.... http://letsrollforums.com/showpost.php?p=2...mp;postcount=25
Go to the top of the page
 
+Quote Post
IsaacNewton
post Sep 11 2014, 04:37 AM
Post #517





Group: Student Forum Pilot
Posts: 42
Joined: 9-November 13
Member No.: 7,578



One post, banned forever. What's the story with this Phil Jayhan character?



This post has been edited by IsaacNewton: Sep 11 2014, 04:39 AM
Go to the top of the page
 
+Quote Post
NP1Mike
post Sep 11 2014, 05:51 PM
Post #518





Group: Active Forum Pilot
Posts: 422
Joined: 25-November 13
Member No.: 7,592



QUOTE (IsaacNewton @ Sep 11 2014, 03:37 AM) *
One post, banned forever. What's the story with this Phil Jayhan character?



I gave my best effort to provide solid, personal research and input to that forum.
I no longer go there anymore.

If you don't tow the line and kiss their rear ends regularly, you will be given the boot.

They have very specific theories as to what happened on 9/11.
If you don't agree with their theories they have no use for you and would rather you get lost.
They don't want to hear alternative theories, or the worst, theories that directly counter their personal theories.


Go to the top of the page
 
+Quote Post
 
Start new topic
onesliceshort
post Nov 29 2012, 08:22 PM
Post #-79



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:32 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 08:51 AM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:45 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:39 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:46 PM
26 Pages V   1 2 3 > »   
Reply to this topicStart new topic
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:37 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:31 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:36 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:34 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:35 PM
26 Pages V   1 2 3 > » 
Reply to this topicStart new topic
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:42 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:44 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:40 PM
onesliceshort
post Nov 29 2012, 08:22 PM
Post #-59



Group Icon

Group: Global Mod
Posts: 2,612
Joined: 30-January 09
Member No.: 4,095












QUOTE (elreb @ Nov 30 2012, 12:05 AM) *
I think that we have a substantial amount of data to start breaking things down and put a package together.

Functionally, NIST has provided a lot of useful information, yet were directed to provide inaccessible - reach less - unapproachable – unachievable conclusions.

The “you run with us or you run into us” attitude is a giveaway to self-serving interests!

The simple fact that only the WTC was harmed is a clue. What are the odds?

OSS or Kawika could start a new thread that is focused on the bottom line.

I say that because they both are sharp cookies.

KP50 will stand guard to prevent trolls or related pests.

It is my personal belief that “7WTC” will break the camel’s back.

No theory…no hypo this…no bull…just data…

Conclusions that agree with experience.


I'm all for it.

Have a look at this theory first.

http://the911forum.freeforums.org/the-ammo...-t87.html#p1140

Substitute ammonium perchlorate mentioned in the link with a sulfur based exotic chemical and it makes sense.

Easily "planted" without the need for the government loyalist "hundreds of operatives carting 100s of tons of explosives for months"

Residue that can be bullshitted away to being sourced by "building contents". If found.

No "loud bangs".

Can be blamed on fire. And be accepted by the deluded and lazy majority.

QUOTE
Ammonium perchlorate powder, probably containing manganese dioxide and other additives (e.g. nano-Al powder, HTPB, HMX, etc.), was mixed with binding agents (polysulfide and/or cement) and one or more of the five spray-on fire resistive (thermal insulation) materials used at the WTC. These materials are identified in NIST NCSTAR 1-6A as: (1) Blaze-shield Type D, (2) Blaze-shield Type DC/F, (3) Blaze-shield Type II, (4) Monokote MK-5, and (5) Vermiculite aggregate plaster.

In order to determine where and when these materials were applied to structural steel surfaces in the WTC complex we need to consider the history of “passive fire protection” practices employed by the New York Port Authority during and after the construction of the towers (and WTC 7), starting in 1970 and ending in 2001.

On April 13, 1970, New York City issued a ban on the use of all sprayed on thermal insulations containing asbestos, the notorious fibrous silicate mineral that was a major component of Blaze-shield Type D. The use of asbestos-containing insulation was discontinued at this time at the 38th floor of WTC 1. In February 1975, a fire occurred in WTC 1 that affected floors 9 to 19 and led to a review of the adequacy of the existing thermal insulation in the entire WTC. The need to upgrade the passive fire protection in the Twin Towers was finally addressed in 1995 when, after yet another study, it was decided to apply a 1½ inch thickness of an asbestos-free spray-on mineral fiber fire protection material to selected steel surfaces. Thus, between 1995 and 2001, thermal protection was upgraded specifically on 18 floors in WTC 1, including floors 92 to 100 and 102; and on 13 floors in WTC 2 including floors 77, 78, 88, 89, 92 and 97. (See NIST NCSTAR 1-6A page xxxvii).

How much thermal protection was used? A reasonable estimate would be a thickness of 2 cm over an effective area of 2500 m2 or 50 m3 per floor. If we assume the material had a density of 400 kg/m3 there would have been 20 tonnes of thermal protection per floor.

It should be noted that the specific selection of areas for insulation upgrading would have made on the basis of the need to apply fire protection material to areas that were known to be vulnerable to fire damage because of poor coverage of the original coating. However, in an "AP-conspiracy" theory, the sprayed-on fire protector was, in fact, an AP-based fire accelerant or pyrotechnic agent. Given the fact that upgrading of the passive fire protection of WTC 1 & 2 was an on-going project throughout the late 1990s, a deadly pyrotechnic coating could have been applied almost anywhere and at any time during this period. Building 7 could also have been "pre-conditioned" with accelerant coatings during the OEM diesel generator upgrades of 1999.

If we assume that the normal cement-based fire-resistant material was actually “spiked” with 25 wt.% of an AP-based pyrotechnic mixture, up to 5 tonnes of ammonium perchlorate could have been sprayed onto a designated floor. Furthermore, once applied to a particular floor, the coating would have remained undisturbed, unnoticed, and with no loss of potency, until it was triggered by the events of September 11th 2001.


It's a "theory" but there's evidence to support the basics of it. And it ticks the right boxes IMO.

Re: the "OEM diesel generator upgrades of 1999", wouldn't the fireproofing need to be upgraded too?

This post has been edited by onesliceshort: Nov 29 2012, 08:22 PM
Go to the top of the page
 
+Quote Post
Reply to this topicStart new topic
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:41 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:47 PM
26 Pages V  « < 24 25 26  
Start new topic
26 Pages V   1 2 3 > »   
Start new topic
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:38 PM
26 Pages V  « < 24 25 26
Reply to this topicStart new topic
Wtc7 Demolition, Putting the pieces together

RSS Lo-Fi Version Time is now: 13th November 2020 - 11:43 PM
RSS Lo-Fi Version Time is now: 13th November 2020 - 11:33 PM
Posts in this topic
- onesliceshort   Wtc7 Demolition   Nov 29 2012, 08:22 PM
- - elreb   I am talking to Kawika as we speak. He has new da...   Nov 29 2012, 08:38 PM
|- - onesliceshort   QUOTE (elreb @ Nov 30 2012, 01:38 AM) I a...   Nov 29 2012, 10:12 PM
- - elreb   We can borrow from our other threads and put this ...   Nov 29 2012, 11:36 PM
- - onesliceshort   My 2cents on how part of the demolition was carrie...   Nov 30 2012, 11:58 AM
- - elreb   My first guess would be “Hidden in Plain Sight”. ...   Nov 30 2012, 12:26 PM
- - elreb   Ok, let’s see if I can come up with a condensed ve...   Nov 30 2012, 04:27 PM
- - elreb   EMERGENCY OPERATIONS CENTER: During major emergen...   Dec 3 2012, 11:29 PM
- - elreb   If you reread Shyam Sunder’s report slowly and com...   Dec 9 2012, 06:50 PM
- - elreb   The entire WTC complex had to be destroyed...it is...   Dec 24 2012, 10:57 PM
- - elreb   A section of an A36 wide flange beam retrieved fro...   Dec 24 2012, 11:00 PM
- - elreb   June 3, 1997 “Statement of Principles” American f...   Dec 24 2012, 11:01 PM
- - elreb   Patsy UA 93 was to leave around 08:01 but was dela...   Dec 25 2012, 12:35 AM
- - Ricochet   If WTC 7 fell straight down how could it damage th...   Dec 25 2012, 08:15 AM
|- - elreb   QUOTE (Ricochet @ Dec 25 2012, 02:15 AM) ...   Dec 25 2012, 12:09 PM
|- - kawika   QUOTE (elreb @ Dec 23 2012, 02:09 PM) Fit...   Dec 25 2012, 05:32 PM
- - SanderO   What does "fell straight down" mean? An...   Dec 25 2012, 10:15 AM
- - elreb   Kawika is one of the best examples of a “Team play...   Dec 25 2012, 05:47 PM
- - elreb   More data: Please note that the data comes from El...   Dec 25 2012, 09:36 PM
- - elreb   “What little damage that the Verizon building rece...   Dec 26 2012, 07:11 PM
- - elreb   First picture shows sulfur activity on the towers....   Dec 27 2012, 07:10 PM
|- - kawika   QUOTE (elreb @ Dec 25 2012, 09:10 PM) Fir...   Dec 28 2012, 04:21 PM
- - elreb   It would seem that columns and beams did not need ...   Dec 28 2012, 04:17 PM
- - elreb   RE: Wtc7 Demolition   Dec 28 2012, 06:07 PM
- - onesliceshort   QUOTE Given the fact that upgrading of the passive...   Dec 28 2012, 09:09 PM
|- - elreb   QUOTE (onesliceshort @ Dec 28 2012, 03:09...   Dec 28 2012, 10:01 PM
|- - kawika   QUOTE (onesliceshort @ Dec 26 2012, 11:09...   Dec 28 2012, 10:18 PM
- - onesliceshort   QUOTE (kawika)Take a look at the column. Both the ...   Dec 28 2012, 11:12 PM
- - elreb   Keep this page handy so we can talk about it. Flo...   Dec 29 2012, 01:40 PM
- - elreb   I think the bunker improvements tie together with ...   Dec 29 2012, 01:45 PM
- - elreb   Gee, no wonder Mayor Rudy Giuliani, Police Commiss...   Dec 29 2012, 05:45 PM
- - elreb   I like FEMA words. The 5th, 6th and 7th floors co...   Dec 29 2012, 08:24 PM
- - SanderO   Elreb, Not a bad verbal description of the strate...   Dec 29 2012, 09:23 PM
- - onesliceshort   I'd have to read through this a few times but ...   Dec 30 2012, 09:17 AM
|- - elreb   QUOTE (onesliceshort @ Dec 30 2012, 03:17...   Dec 30 2012, 01:25 PM
- - SanderO   In an long span open office structure the core car...   Dec 30 2012, 11:45 AM
- - onesliceshort   Thanks! To both. QUOTE What is 79 doing? ...   Dec 30 2012, 03:35 PM
|- - elreb   QUOTE (onesliceshort @ Dec 30 2012, 09:35...   Dec 30 2012, 05:23 PM
|- - elreb   QUOTE (onesliceshort @ Dec 30 2012, 09:35...   Dec 30 2012, 07:03 PM
|- - onesliceshort   QUOTE (elreb @ Dec 31 2012, 12:03 AM) OSS...   Dec 30 2012, 08:31 PM
|- - kawika   QUOTE (onesliceshort @ Dec 28 2012, 10:31...   Dec 30 2012, 08:55 PM
|- - elreb   QUOTE Is that truss 2 seen in this image of Floor ...   Dec 30 2012, 09:16 PM
- - SanderO   79 got blamed but he was a diversion.   Dec 30 2012, 04:33 PM
- - SanderO   You wouldn't have to weaken the trusses if you...   Dec 30 2012, 06:23 PM
- - SanderO   No I don't think so... those are the standard/...   Dec 30 2012, 08:33 PM
- - SanderO   Elreb, Not all trusses have diagonals or triangul...   Dec 30 2012, 10:17 PM
- - elreb   As expected, you are missing the point… And again...   Dec 30 2012, 11:03 PM
- - SanderO   The drawing in your last post is NOT a truss... it...   Dec 30 2012, 11:15 PM
- - elreb   So now magically Truss #3 is not a truss and the s...   Dec 30 2012, 11:50 PM
- - SanderO   What you showed is not a truss.. it's a diagon...   Dec 31 2012, 12:08 AM
- - elreb   Attention…all readers Do to the simple fact that ...   Dec 31 2012, 01:20 AM
- - onesliceshort   Oh man...my bad So would the splices shown be ...   Dec 31 2012, 06:28 AM
- - SanderO   OSS. Correct.. these are the so called beam stubs...   Dec 31 2012, 08:03 AM
- - SanderO   Some information about welds: http://www.weldingt...   Dec 31 2012, 09:30 AM
- - elreb   QUOTE The “trusses” were designed to transfer the ...   Dec 31 2012, 11:26 PM
|- - onesliceshort   QUOTE (elreb @ Jan 1 2013, 04:26 AM) I st...   Jan 1 2013, 08:32 AM
|- - SanderO   QUOTE (onesliceshort @ Jan 1 2013, 08:32 ...   Jan 1 2013, 11:35 AM
- - onesliceshort   Some 3 dimensional (partial) images of trusses 1 a...   Jan 1 2013, 09:00 AM
- - SanderO   OSS, I don't consider anyone an idiot. I hav...   Jan 1 2013, 11:22 AM
- - onesliceshort   I give up. As for the FEMA diagram, if the square...   Jan 1 2013, 12:06 PM
- - SanderO   The architectural plan calls out a truss which run...   Jan 1 2013, 12:30 PM
- - onesliceshort   "Mr Koenig" at FEMR's site labelled ...   Jan 1 2013, 12:56 PM
- - elreb   Meat on the Bone…First time ever shown…better save...   Jan 1 2013, 01:43 PM
- - SanderO   Thanks Elreb.... I will study these.. Are there ...   Jan 1 2013, 02:25 PM
|- - kawika   QUOTE (SanderO @ Dec 30 2012, 04:25 PM) T...   Jan 1 2013, 02:30 PM
- - elreb   Sometimes I do not explain myself well enough. Th...   Jan 1 2013, 02:52 PM
|- - onesliceshort   QUOTE (elreb @ Jan 1 2013, 07:52 PM) Some...   Jan 1 2013, 03:24 PM
- - SanderO   After seeing these photos (again) it reinforces my...   Jan 1 2013, 03:16 PM
- - elreb   I understand that certain parties would like to fo...   Jan 1 2013, 07:58 PM
|- - onesliceshort   QUOTE (elreb @ Jan 2 2013, 12:58 AM) I un...   Jan 1 2013, 08:28 PM
- - SanderO   The transfer trusses and girders were connecting a...   Jan 1 2013, 09:34 PM
- - kawika   The East Penthouse fell in, but the sunlight that ...   Jan 1 2013, 10:51 PM
- - elreb   Happy New year   Jan 1 2013, 10:57 PM
- - SanderO   There is good visual evidence that the east pentho...   Jan 2 2013, 12:07 AM
- - onesliceshort   QUOTE (kawika)We see 54 exterior columns!...   Jan 2 2013, 08:48 AM
- - SanderO   OSS, You may be not understand how any building w...   Jan 2 2013, 10:41 AM
- - SanderO   Are you suggesting that the East Penthouse mass dr...   Jan 2 2013, 10:44 AM
- - kawika   The exterior distortion races from top to bottom. ...   Jan 2 2013, 10:52 AM
- - SanderO   Interesting comment Kawika The floors likely were...   Jan 2 2013, 11:11 AM
- - onesliceshort   QUOTE Interesting comment Kawika Thanks kawika, I...   Jan 2 2013, 12:27 PM
|- - kawika   QUOTE (onesliceshort @ Dec 31 2012, 02:27...   Jan 2 2013, 12:33 PM
- - elreb   Check this out. 5th floor stair #1 next to Truss ...   Jan 2 2013, 01:28 PM
- - kawika   Nice find. Worth exploring further.   Jan 2 2013, 01:42 PM
- - SanderO   One floor ht per .1 secs is 13 feet per .1 sec = 1...   Jan 2 2013, 02:13 PM
|- - kawika   QUOTE (SanderO @ Dec 31 2012, 04:13 PM) O...   Jan 2 2013, 02:54 PM
- - SanderO   Don't worry about your spelling... we can read...   Jan 2 2013, 02:16 PM
- - elreb   Where are the bathrooms? By the way...the fire ca...   Jan 2 2013, 02:33 PM
- - elreb   Where is the weight on this blueprint? Not over 7...   Jan 2 2013, 04:43 PM
- - onesliceshort   QUOTE Does anyone know what was under the East pen...   Jan 2 2013, 09:09 PM
|- - elreb   QUOTE (onesliceshort @ Jan 2 2013, 03:09 ...   Jan 2 2013, 11:50 PM
|- - DoYouEverWonder   QUOTE Does anyone know what was under the East pen...   Jan 3 2013, 08:00 AM
- - onesliceshort   Thanks DYEW. QUOTE ''We built in enough r...   Jan 3 2013, 08:28 AM
|- - SanderO   QUOTE (onesliceshort @ Jan 3 2013, 08:28 ...   Jan 3 2013, 09:57 AM
- - DoYouEverWonder   A bit off topic, but the irony is just too much fo...   Jan 3 2013, 08:45 AM
- - SanderO   Nothing suspicious about the structural alteration...   Jan 3 2013, 09:46 AM
|- - DoYouEverWonder   QUOTE (SanderO @ Jan 3 2013, 08:46 AM) No...   Jan 3 2013, 03:12 PM
- - onesliceshort   QUOTE Is the implication of DYEW's post that S...   Jan 3 2013, 10:26 AM
- - SanderO   OSS, We would have to see the plans of the altera...   Jan 3 2013, 10:51 AM
- - elreb   Oops, I ask the wrong question. I meant to ask “W...   Jan 3 2013, 01:31 PM
- - SanderO   Virtually every high rise building in NYC has mech...   Jan 3 2013, 01:48 PM
6 Pages V   1 2 3 > » 

Source file links:

'index.php-2571.html'

'index.php-2572.html'

'index.php-2573.html'

'index.php-2574.html'

'index.php-2575.html'

'index.php-2576.html'

'index.php-32631.html'

'index.php-32634.html'

'index.php-32635.html'

'index.php-32636.html'

'index.php-32637.html'

'index.php-32638.html'

'index.php-32639.html'

'index.php-32640.html'

'index.php-32641.html'

'index.php-32642.html'

'index.php-32643.html'

'index.php-32644.html'

'index.php-32645.html'

'index.php-32646.html'

'index.php-32647.html'

'index.php-32648.html'

'index.php-32649.html'

'index.php-32650.html'

'index.php-32651.html'

'index.php-32652.html'

'index.php-32653.html'

'index.php-32654.html'

'index.php-32655.html'

'index.php-32656.html'

'index.php-32657.html'

'index.php-32658.html'

'index.php-32659.html'

'index.php-32660.html'

'index.php-32661.html'

'index.php-32662.html'

'index.php-32663.html'

'index.php-32664.html'

'index.php-32665.html'

'index.php-32666.html'

'index.php-32667.html'

'index.php-32668.html'

'index.php-32669.html'

'index.php-32670.html'

'index.php-32671.html'

'index.php-32672.html'

'index.php-32673.html'

'index.php-32674.html'

'index.php-32675.html'

'index.php-32676.html'

'index.php-32677.html'

'index.php-32678.html'

'index.php-32679.html'

'index.php-32680.html'

'index.php-32681.html'

'index.php-32682.html'

'index.php-32683.html'

'index.php-32684.html'

'index.php-32685.html'

'index.php-32686.html'

'index.php-32687.html'

'index.php-32688.html'

'index.php-32689.html'

'index.php-32690.html'

'index.php-32691.html'

'index.php-32692.html'

'index.php-32693.html'

'index.php-32694.html'

'index.php-32695.html'

'index.php-32696.html'

'index.php-32697.html'

'index.php-32698.html'

'index.php-32699.html'

'index.php-32700.html'

'index.php-32701.html'

'index.php-32702.html'

'index.php-32703.html'

'index.php-32704.html'

'index.php-32705.html'

'index.php-32706.html'

'index.php-32707.html'

'index.php-32708.html'

'index.php-32709.html'

'index.php-32710.html'

'index.php-32711.html'

'index.php-32712.html'

'index.php-32713.html'

'index.php-32714.html'

'index.php-32715.html'

'index.php-32716.html'

'index.php-32717.html'

'index.php-32718.html'

'index.php-32719.html'

'index.php-32720.html'

'index.php-32721.html'

'index.php-32722.html'

'index.php-32723.html'

'index.php-32724.html'

'index.php-32725.html'

'index.php-32726.html'

'index.php-32727.html'

'index.php-32728.html'

'index.php-32729.html'

'index.php-32730.html'

'index.php-32731.html'

'index.php-32732.html'

'index.php-32733.html'

'index.php-32734.html'

'index.php-32735.html'

'index.php-32736.html'

'index.php-32738.html'

'index.php-32739.html'

'index.php-32740.html'

'index.php-32744.html'

'index.php-32745.html'

'index.php-32746.html'

'index.php-32747.html'

'index.php-32748.html'

'index.php-32749.html'

'index.php-32750.html'

'index.php-32751.html'

'index.php-32752.html'

'index.php-32753.html'

'index.php-32754.html'

'index.php-32755.html'

'index.php-32756.html'

'index.php-32757.html'

'index.php-32758.html'

'index.php-32759.html'

'index.php-32760.html'

'index.php-32761.html'

'index.php-32762.html'

'index.php-32763.html'

'index.php-32764.html'

'index.php-32765.html'

'index.php-32766.html'

'index.php-32767.html'

'index.php-32768.html'

'index.php-32769.html'

'index.php-32770.html'

'index.php-32771.html'

'index.php-32772.html'

'index.php-32773.html'

'index.php-32774.html'

'index.php-32775.html'

'index.php-32776.html'

'index.php-32777.html'

'index.php-32778.html'

'index.php-32779.html'

'index.php-32780.html'

'index.php-32781.html'

'index.php-32782.html'

'index.php-32783.html'

'index.php-32784.html'

'index.php-32785.html'

'index.php-32786.html'

'index.php-32787.html'

'index.php-32788.html'

'index.php-32789.html'

'index.php-32790.html'

'index.php-32791.html'

'index.php-32792.html'

'index.php-32793.html'

'index.php-32794.html'

'index.php-32795.html'

'index.php-32796.html'

'index.php-32797.html'

'index.php-32798.html'

'index.php-32799.html'

'index.php-32800.html'

'index.php-32801.html'

'index.php-32802.html'

'index.php-32803.html'

'index.php-32804.html'

'index.php-32805.html'

'index.php-32806.html'

'index.php-32807.html'

'index.php-32808.html'

'index.php-32809.html'

'index.php-32810.html'

'index.php-32811.html'

'index.php-32812.html'

'index.php-32813.html'

'index.php-32814.html'

'index.php-32815.html'

'index.php-32816.html'

'index.php-32817.html'

'index.php-32818.html'

'index.php-32819.html'

'index.php-32820.html'

'index.php-32821.html'

'index.php-32822.html'

'index.php-32823.html'

'index.php-32824.html'

'index.php-32825.html'

'index.php-32826.html'

'index.php-32827.html'

'index.php-32828.html'

'index.php-32829.html'

'index.php-32830.html'

'index.php-32831.html'

'index.php-32832.html'

'index.php-32833.html'

'index.php-32834.html'

'index.php-32835.html'

'index.php-32836.html'

'index.php-32837.html'

'index.php-32838.html'

'index.php-32839.html'

'index.php-32840.html'

'index.php-32841.html'

'index.php-32842.html'

'index.php-32843.html'

'index.php-32844.html'

'index.php-32845.html'

'index.php-32846.html'

'index.php-32847.html'

'index.php-32848.html'

'index.php-32849.html'

'index.php-32850.html'

'index.php-32851.html'

'index.php-32852.html'

'index.php-32853.html'

'index.php-32854.html'

'index.php-32855.html'

'index.php-32856.html'

'index.php-32857.html'

'index.php-32858.html'

'index.php-32859.html'

'index.php-32860.html'

'index.php-32861.html'

'index.php-32862.html'

'index.php-32863.html'

'index.php-32864.html'

'index.php-32865.html'

'index.php-32866.html'

'index.php-32867.html'

'index.php-32868.html'

'index.php-32869.html'

'index.php-32870.html'

'index.php-32871.html'

'index.php-32872.html'

'index.php-32873.html'

'index.php-32874.html'

'index.php-32875.html'

'index.php-32876.html'

'index.php-32877.html'

'index.php-32878.html'

'index.php-32879.html'

'index.php-32880.html'

'index.php-32881.html'

'index.php-32882.html'

'index.php-32883.html'

'index.php-32884.html'

'index.php-32885.html'

'index.php-32886.html'

'index.php-32887.html'

'index.php-32888.html'

'index.php-32889.html'

'index.php-32890.html'

'index.php-32891.html'

'index.php-32892.html'

'index.php-32893.html'

'index.php-32894.html'

'index.php-32895.html'

'index.php-32896.html'

'index.php-32897.html'

'index.php-32898.html'

'index.php-32899.html'

'index.php-32900.html'

'index.php-32901.html'

'index.php-32902.html'

'index.php-32903.html'

'index.php-32904.html'

'index.php-32905.html'

'index.php-32906.html'

'index.php-32907.html'

'index.php-32908.html'

'index.php-32909.html'

'index.php-32910.html'

'index.php-32911.html'

'index.php-32912.html'

'index.php-32913.html'

'index.php-32914.html'

'index.php-32915.html'

'index.php-32916.html'

'index.php-32917.html'

'index.php-32918.html'

'index.php-32919.html'

'index.php-32920.html'

'index.php-32921.html'

'index.php-32922.html'

'index.php-32923.html'

'index.php-32924.html'

'index.php-32925.html'

'index.php-32926.html'

'index.php-32927.html'

'index.php-32928.html'

'index.php-32929.html'

'index.php-32930.html'

'index.php-32931.html'

'index.php-32932.html'

'index.php-32933.html'

'index.php-32934.html'

'index.php-32935.html'

'index.php-32936.html'

'index.php-32937.html'

'index.php-32938.html'

'index.php-32939.html'

'index.php-32940.html'

'index.php-32941.html'

'index.php-32942.html'

'index.php-32943.html'

'index.php-32944.html'

'index.php-32945.html'

'index.php-32946.html'

'index.php-32947.html'

'index.php-32948.html'

'index.php-32949.html'

'index.php-32950.html'

'index.php-32951.html'

'index.php-32952.html'

'index.php-32953.html'

'index.php-32954.html'

'index.php-32955.html'

'index.php-32956.html'

'index.php-32957.html'

'index.php-32958.html'

'index.php-32959.html'

'index.php-32960.html'

'index.php-32961.html'

'index.php-32962.html'

'index.php-32963.html'

'index.php-32964.html'

'index.php-32965.html'

'index.php-32966.html'

'index.php-32967.html'

'index.php-32968.html'

'index.php-32969.html'

'index.php-32970.html'

'index.php-32971.html'

'index.php-32972.html'

'index.php-32973.html'

'index.php-32974.html'

'index.php-32975.html'

'index.php-32976.html'

'index.php-32977.html'

'index.php-32978.html'

'index.php-32979.html'

'index.php-32980.html'

'index.php-32981.html'

'index.php-32982.html'

'index.php-32983.html'

'index.php-32984.html'

'index.php-32985.html'

'index.php-32986.html'

'index.php-32987.html'

'index.php-32988.html'

'index.php-32989.html'

'index.php-32990.html'

'index.php-32991.html'

'index.php-32992.html'

'index.php-32993.html'

'index.php-32994.html'

'index.php-32995.html'

'index.php-32996.html'

'index.php-32997.html'

'index.php-32998.html'

'index.php-32999.html'

'index.php-33000.html'

'index.php-33001.html'

'index.php-33002.html'

'index.php-33003.html'

'index.php-33004.html'

'index.php-33005.html'

'index.php-33006.html'

'index.php-33007.html'

'index.php-33008.html'

'index.php-33009.html'

'index.php-33010.html'

'index.php-33011.html'

'index.php-33012.html'

'index.php-33013.html'

'index.php-33014.html'

'index.php-33015.html'

'index.php-33016.html'

'index.php-33017.html'

'index.php-33018.html'

'index.php-33019.html'

'index.php-33020.html'

'index.php-33021.html'

'index.php-33022.html'

'index.php-33023.html'

'index.php-33024.html'

'index.php-33025.html'

'index.php-33026.html'

'index.php-33027.html'

'index.php-33028.html'

'index.php-33029.html'

'index.php-33030.html'

'index.php-33031.html'

'index.php-33032.html'

'index.php-33033.html'

'index.php-33034.html'

'index.php-33035.html'

'index.php-33036.html'

'index.php-33037.html'

'index.php-33038.html'

'index.php-33039.html'

'index.php-33040.html'

'index.php-33041.html'

'index.php-33042.html'

'index.php-33043.html'

'index.php-33044.html'

'index.php-33045.html'

'index.php-33046.html'

'index.php-33047.html'

'index.php-33048.html'

'index.php-33049.html'

'index.php-33050.html'

'index.php-33051.html'

'index.php-33052.html'

'index.php-33053.html'

'index.php-33054.html'

'index.php-33055.html'

'index.php-33056.html'

'index.php-33057.html'

'index.php-33058.html'

'index.php-33059.html'

'index.php-33060.html'

'index.php-33061.html'

'index.php-33062.html'

'index.php-33063.html'

'index.php-33064.html'

'index.php-33065.html'

'index.php-33066.html'

'index.php-33067.html'

'index.php-33068.html'

'index.php-33070.html'

'index.php-33071.html'

'index.php-33075.html'